The use of metal in our time not only has not lost its relevance, but is also gaining increasing popularity. This is due to the high performance characteristics of the material, its versatility and environmental safety. For this reason, metal structures will not lose their relevance for a long time.
On the other hand, manufacturing metal structures according to customer drawings is an extremely complex process, requiring not only modern, high-tech equipment, but also trained, experienced specialists. These are the production conditions created in our company. We are ready to solve any, even the most complex and extraordinary problems. In fact, there are no insoluble problems - you can always find some kind of compromise and mutually beneficial solution.
Design of metal structures
Manufacturing of metal structures
Buildings made of metal structures
LMK, LSTK
Welded beams
Columns
Trusses, purlins, consoles
Fences
Towers, towers, masts
Electrical pipes, tees, bends
Containers, containers
Shelving
Kiosks, pavilions
Gas stations, service stations
Attic
Stairs
Railings
Non-standard products
How are metal structures manufactured according to customer drawings?
- You provide a ready-made drawing according to which certain structures will be manufactured. It is necessary to understand that not all people can draw technically correct drawings - this requires a lot of practice and skills. Therefore, it is quite enough for our specialists to provide the conceptual basis of the design. This could be a diagram, a hand drawing, a sketch, and so on. The most important thing is to explain to our specialists the idea and essence of the project in as much detail as possible. In any case, the customer will see the final drawing.
- The next step is to develop the technological process. Do not immediately rush to the machine or welding machine in order to complete the order faster. The work will be much more efficient and of higher quality when each step is not only thought out, but also written down, and all the necessary equipment and consumables are prepared.
- Carrying out assembly work and applying protective coatings. Assembly and welding of metal structures according to customer drawings in Moscow is an important point that determines quality, but not the only one. Our specialists pay special attention to the issues of applying protective coatings. This can be galvanizing or simply a primer followed by painting in the color desired by the customer. For these purposes, special powder compositions are used that correspond to the RAL color map.
- At the final stage, the product is packaged and transported to the site. By the way, the delivery conditions will pleasantly surprise and delight you.
Our company carries out all work within a strictly specified time frame at very affordable prices. At the same time, the quality of work is strictly controlled at all stages. We are confident in the result. For more detailed information about cooperation, please contact our consultants. We will be glad to have fruitful and mutually beneficial cooperation.
Cost of production of design documentation
Manufacturing of metal structures price
| Name | Unit change | Note | Price including VAT 18% | |
|---|---|---|---|---|
| Manufacturing of metal structures | tn. | from 50,000 rub. | ||
| Manufacturing of non-standard metal structures | tn. | Negotiable | ||
| Manufacturing of metal structures from stainless steel and aluminum | tn. | Negotiable | ||
| Manufacturing of LMK | Structures made of galvanized bent profiles | Negotiable | ||
| Manufacturing of trusses | tn. | no metal | from 23 - 28 thousand rubles. | |
| Making purlins | tn. | no metal | from 11 - 16 thousand rubles. | |
| Manufacturing of columns | tn. | no metal | from 13-19 thousand rubles. | |
| Manufacturing of a welded beam | tn. | from 37,800 rub. | ||
| Manufacturing of frames, modular buildings | tn. | from 53,000 rub. | ||
| Manufacturing of stairs, canopies, canopies, attics | tn. | from 65,000 rub. | ||
| Manufacturing of masts, towers, power line supports | tn. | from 62,000 rub. | ||
| Manufacturing of galvanized racks for noise barriers | tn. | from 79,000 rub. | ||
| Manufacturing of containers, tanks, silos, etc. | tn. | from 70,000 rub. | ||
| Manufacturing of pipeline supports | tn. | from 70,000 rub. | ||
| Manufacturing of pipes, electric-welded bends (shells) | tn. | Diameter from 530x8-16 to 2220x10-25 | from 37,000 rub. | |
| Turnkey production of media facades | sq.m. | (Project, equipment, metal construction, installation) | from 2000 to 5000 USD. | |
| Manufacturing of shelving | PC. | from 750 rub. | ||
| Manufacturing of fences and enclosing structures | linear m. | from 2,000 rub. | ||
| Gate manufacturing | Negotiable | |||
| Manufacturing and installation of railings (stainless steel, metal) | linear m. | from 2,000 rub. | ||
Cost of installation of metal structures
| Name | Unit | Price including VAT 18% | |
|---|---|---|---|
| Installation of metal structures | tn. | from 15,000 rub. | |
| Installation of fences and fences | m. linear | from 800 rub. | |
| Installation of building cladding with corrugated sheets | m. sq. | from 150 - 250 rub. | |
| Installation of building cladding with sandwich panels | m. sq. | from 250 - 750 rub. | |
| Installation of shaped elements | linear m. | from 130 rub. | |
| Gate installation | PC. | from 13,000 rub. | |
There is a piece of steel pipe with an outer diameter of 108 mm, a length of 190 mm and a flange.
The following work needs to be done:
1. It needs to be increased to a length of 1000 mm. (Option 1 - leave it as is. Option 2 - weld on the flange). There are 6 such pieces of pipes.
2. Make sockets from ferrous metal 2.0 mm thick. One is round with a transition to a 108 pipe, the other is rectangular with a transition to a 108 pipe.
Option 1 - weld a piece of 108 pipe 50 mm long at the transition point to the 108 pipe.
Option 2 - weld a flange at the transition point to the 108 pipe) An approximate sketch is given in the appendix.
3. Weld to the existing metal structure: Option 1 - a piece of 108 pipe 100 mm long, Option 2 - a piece of 108 pipe with a flange (total length 100 mm). In the metal structure, cut a round hole in the place where the pipe is welded
4. Cut a stainless steel pipe with an outer diameter of 20 mm into lengths of 1500 mm (35 pcs) and 500 mm (16 pcs). At one end, cut a pipe inside with a depth of about 20 mm (we will provide what will be screwed into it).
What is the possible price of the issue? Need it urgently.
MK Monteko LLC produces metal structures to order, and by contacting us, customers can receive high-quality services for the manufacture of custom-made products, including from customer materials.
In the process of manufacturing products of standard and non-standard sizes, only experienced specialists take part in our production; each site is equipped with its own production facilities and modern equipment. We guarantee all clients to quickly and efficiently carry out the design, development and production of any structures.
Manufacturing of metal structures according to customer drawings
As part of the service for the production of structures according to customer drawings, we are ready to undertake the production of metal structures for power lines (power lines), shopping centers, buildings, workshops, houses, advertising facilities, warehouses, terminals and hangars.
In the process of manufacturing structures according to customer drawings, we 100% comply with all specified customer requirements; if there is a technical difficulty in repeating any unit, we will agree with you on the next steps and offer our options.
We are ready to qualitatively fulfill all the specified requirements for the project; we will calculate the cost of manufacturing structures at the stage of approval of an individual project, depending on the required volume of rolled metal and the complexity of production.
At the MK Monteko company, we manufacture metal structures of any complexity to order; for all finished metal products of standard and non-standard sizes, we issue quality passports and certificates confirming what kind of rolled metal was used.
You can quickly and efficiently make metal structures to order by contacting MK Monteco; we guarantee high quality, compliance with all standards and requirements, as well as an individual approach to each project.
Cost of manufacturing metal structures according to customer drawings
The final cost of manufacturing metal structures according to customer drawings is determined based on the complexity of the project, the selected material and raw materials, and the requirements for processing elements.
Standard prices for manufacturing according to customer drawings are presented on our website; if you need individual development, it would be best to contact us by phone, and, if possible, provide a copy of the project or other data for a detailed cost calculation.
MK Monteko LLC will bring your project to life in metal!
Metal structures to order in Moscow
The MK Monteko company will produce standard and non-standard metal structures to order of any complexity, and we issue quality certificates and certificates for rolled metal products for our products.
Plasma cutting
To fulfill orders for shaped metal cutting, we have a plasma machine with a 6x2 meter work table and a Hypertherm Powermax 125 plasma cutter, which allows you to confidently work with sheets up to 25mm thick. Our machine operates on servo drives, which reduces taper and improves cut quality.
Manufacturing of welded metal structures
MK Monteko LLC offers a range of designs for standard and individual projects made of ferrous metal and stainless steel. Welding work on the production of metal structures is carried out by our experienced welders using modern equipment.
Metal galvanizing
The MK Monteko company provides services for hot and cold galvanizing (galvanizing) of metal and metal structures at a competitive cost and price in Moscow. We also carry out hot and cold galvanizing of metal, which can be purchased from us to order.
Dismantling of metal structures
MK Monteko LLC carries out work on dismantling metal structures, including drawing up a plan and assessing the scope of work. Our experts determine the complexity of dismantling structures, the stages of disassembly, taking into account the preservation of structural elements or their partial or complete disposal.
- Excellent quality. Reliability and durability of products are laid down already at the project development stage in the drawings. For the production of metal structures, materials and components tested for strength and stability are used.
- Complex nature of the work. Design of metal structures and their manufacture in compliance with technological requirements. Then we deliver the products to your site in a short time. In addition, our company carries out all stages of construction and installation work, for which there are appropriate certificates.
- Efficiency. Our company has implemented modern technological solutions and uses specialized computer programs for optimization of drawings. Together with extensive professional experience, this allows us to produce metal structures of any size and shape in a short time.
- Affordable prices. We set ourselves the task of calculating the optimal price for the production and installation of metal structures in accordance with a specific technical specification (project, drawing, sketch). The initial cost of products is from 50,000 rubles per 1 ton.
