If you are used to making small handicraft masterpieces with your own hands and, as often happens, you have pieces of organza lying around in your creative bins, then a great idea would be to make very delicate flowers from it. You can use them as a brooch, decorate a hairband, handbag or bracelet with them, or perhaps you can come up with some original use for them. The great advantage of these flowers is that they do not wrinkle at all, and if they suddenly get wet, they can simply be left to dry in the air - their petals will straighten out again and will delight and delight others!
Another interesting point is the unusual method of work in their manufacture. Once you start creating your little wonderful masterpiece, you will certainly appreciate how exciting and interesting it is to scorch organza on a candle!
You will need:
- candle and matches;
- scissors, pins, needle and thread;
- a simple pencil, possibly also a compass, ruler and eraser for creating a pattern;
- a piece of checkered paper;
- organza scraps;
- beads, beads, pearls or sequins depending on your imagination.
First, on checkered paper, draw a flower with a diameter of about 12 cm with 5 or 6 equal petals. If you want the result to be a water lily, make 4 round petals, and if you want a chrysanthemum, make 12 oblong petals. But starting with a chrysanthemum using this technique is not the best idea, because in order to singe 12 thin petals, you must already have at least a little skill and experience. The most optimal is 6 petals. Subsequently, you can vary the number and shape of the petals, as well as the diameter of the entire rosette.
Then we cut out the paper pattern. We fold the organza into 4 layers and, placing the pattern on top, pin everything together using pins. Now roughly cut out the flower along the contour. Organza is a difficult material, its layers slide and shift all the time, but this should not upset you at all at this stage. Anyway, the final shape of the flower is given not by scissors, but by the light of a candle. Therefore, if your petals are uneven, crooked and unequal, this will only make the flower look more alive and natural. In each blank, we cut the petals towards the middle, leaving an uncut area right in the middle with a diameter of about 1 cm. In total, you need to cut 8-12 blanks from the fabric.
Now let's begin the most exciting stage of making a flower. Light a candle and begin to carefully work on the edges of each piece. We take one piece and singe its edges in the flame. Organza is a synthetic material, and simply bringing the edge of the flower to a distance of 2-3 cm from the side of the flame is enough for the cut to melt. To make the form more alive, you need to bring it not only to the side of the flame, but also above it. The secret is that when you hold the cut above the flame 5-6 cm above the candle, it not only melts, but also bends beautifully, acquiring fancy wavy curves of the edges. Here you need to be very careful not to singe your fingers and not to burn, or rather, not to melt the entire workpiece completely. The petals will be unequal, with different curves and different lengths. This is fine. The melted edges, as a rule, turn out darker than the tone of the fabric, especially if the candle smokes during operation.
After all the pieces have been worked out, we begin assembling the flower.
Organza is an attractive, weightless material, and flowers made from it are especially fragile, feminine and realistic. This master class provides examples of creating colors of different complexity, which you can use to enrich jewelry, accessories, clothing, and so on.
simple flower
To create this flower you need:
- circle templates, the diameter of which will vary slightly,
- organza of the required color,
- candle,
- glue gun or needle and thread,
- additional decorative material (beads or seed beads).
To get started, create templates. You can outline glasses with necks of different diameters on cardboard and draw a six-leaf leaf with large, barely defined petals.
After this, fold the fabric several times, trace one of the templates and cut it out. 
You should have five to six large circles, five to four medium ones and four to three smallest ones.
After cutting, carefully singe the edges of the circles over the candle. 
After that, start collecting the flower. It can be sewn or glued. 
First, glue all the large ones in one place in the middle, the middle ones on top of them, and add the small circles last.
Decorate the middle of the workpiece with beads or beads.
The finished flower can be placed on a hairpin, elastic band, or used for other decorative purposes.
double flower
To make such a flower you will need:
- organza or veil;
- paper;
- scissors;
- tweezers;
- candle and matches;
- felt;
- brooch pin;
- decorative beads;
- needle and thread;
- thick cardboard;
- universal glue.
First you need to make 3 paper templates in the shape of circles of different diameters: 8 cm, 9 cm and 10 cm.
Then cut out 4 pieces of each diameter from organza. For convenience, you can fold a piece of organza in four and cut out a circle. 
Fold each resulting circle in half and cut the folds with scissors 1 cm short of the center. 
Hold the uncut tip of the workpiece with tweezers and round the corners. It should look like in the photo. 
Unfold the workpiece and singe each petal over a candle flame, while bending the remaining petals. 
Spread the petals apart and scorch the edges between them. 
Do this with all the pieces and start assembling.
For comfortable assembly, thread the needle and stick its eye into the cardboard.
Starting with the largest one, thread all the petals one by one on the needle, straightening them. 
When all the petals are collected, take out the needle and sew the middle of the flower several times, decorating it with beads. The flower is ready. 
To make a brooch out of it, cut a felt circle slightly larger than the size of the pin. And make small slits in it to insert a pin. 
Using all-purpose glue, glue the felt and pin to the flower base. The wonderful flower brooch is ready!
Peonies flowers
To create flowers you will need:
- any organza;
- flower and petal patterns;
- pins;
- needle and thread;
- disappearing marker or chalk;
- pincushion or piece of foam rubber;
- beads, rhinestones;
- scissors;
- candle and matches.
Templates for the petals must first be cut out of cardboard. The template can be absolutely any shape. We suggest you draw several five-leaf leaves of different diameters, as well as several individual petals in the shape of hearts.
Attach the finished templates to the fabric and trace with a marker. If you need several identical petals, then fold the fabric in several layers. Secure each piece with pins and cut out. There is no need to do this perfectly evenly, since in the future the edges will be burned, and on a living peony, all the leaves are different and slightly torn.
Once all the pieces are cut out, start firing. Carefully pass each petal over the candle flame. They should melt a little and curl up. Some large petals can be slightly cut to create a ragged effect.
Now arrange all the pieces according to size. Insert a needle and thread, eye down, into a piece of foam rubber or something soft and sequentially string five-petal blanks onto the needle, from largest to smallest. The number of layers can be arbitrary, for example, 4 large, 3 smaller, 3 even smaller and 4 very small. The center of the flower can be decorated with petals of a different color, beads or small single petals.
To form a flower from heart-shaped blanks, you will need 5-8 petals of each size. Collect them on the needle in a circle, stringing them one at a time by the sharp part, starting with the largest elements. Each subsequent petal is laid overlapping the previous one.
After the flower is collected, it is carefully sewn together with several stitches in the center, making sure to capture all the petals. If desired, the middle can be decorated with beautiful beads or seed beads. And on the reverse side, sew a safety pin or a special fastener.
Rolled up rose
To create such roses you should prepare:
- any organza and satin ribbon;
- soldering iron with a sharp rod (100 W);
- glass;
- needle and thread;
- glue gun
First you need to make 3 petal templates of different sizes. To make them, it is better to choose a material that is resistant to the heat of a soldering iron. Tin or thick cardboard is perfect for this. In this case, we used an empty bottle of hairspray; it can be easily straightened and cut. To avoid injury, it is better to sand the edges.
You will need a small piece of glass; we will use a soldering iron to cut out the petals on it. After work, stuck organza residues can be easily removed when they have cooled.
To form one rose, you need to use a soldering iron to cut out 10 petals: 3 large, 3 medium and 4 small. It is better to cut them on the bias.
Fold each petal in half lengthwise, inside out, sew along the edge with matching threads and pull together.
Twist the rose petals sequentially, securing them with threads or a glue gun.
Start from the middle - roll a small petal into a tube, and attach the rest around it in ascending order.
A rose with petals of different shades will look quite interesting. You can also play with the texture of the fabric.
Volumetric rose
To make a voluminous rose, prepare:
- organza ribbon - 2 meters;
- paper;
- candle and matches;
- needle and thread;
- scissors.
Cut out three petal templates from paper: large, medium and small. You will need 15 pieces of large and medium petals, 12 pieces of small ones.
Fold the ribbon the appropriate number of times and cut out the required number of petals.
Burn the edges of each petal, carefully passing it over the candle flame.
Take three small petals and fold them into a fan.
You can make unique decorations for a party or wedding celebration with your own hands from organza. A lot of master classes offer us simple techniques for making flowers, buds and bouquets from organza. What do you need to make these flowers yourself?
Materials:
In order to make the simplest flower, you will first need organza. This material can be easily found in curtain stores or fabric stores. There are also stores that sell organza in bulk in case this activity interests you.
In addition to fabric, you also need scissors, a lighter, glue or a needle and thread, and several beads.
How to make a flower?
First, decide on the size of the petals. Draw one petal or several different sizes on a sheet of cardboard, cut out the blank.
Using a stencil, cut out several petals from a piece of organza. For the first time, five or seven will be enough for you.
It is known that organza is a very fragile material; it quickly begins to lose threads. The technique of making organza flowers with your own hands is based on securing these threads. For this you will need a lighter.
Carefully scorch the edges of each petal over a lighter flame. Do this quickly so that the petals only slightly lose their shape and the edges do not melt too much.
It is no longer necessary to shape the petals; it is enough that they have already curled slightly after firing. Next, decide how you will collect your flower. This can be done using glue or a needle and thread.
Fold the petals into a flower and secure them. In the middle of the flower you can “plant” several beads, a small button or a pinch of beads with glue. Your flower is ready.
You can make it into a brooch, attach it to a headband or a hairpin.
What kind of organza flowers can you make with your own hands?
Organza inflorescences will perfectly complement both a business suit and a wedding dress. Decorate your handbag with fabric flowers and make an original bracelet. Each idea will be unique, because flowers made with your own hands always turn out special.
To make a flower we will need:
Organza
Scissors
Candle and lighter or matches
Brooch pin
Decorative beads
Needle with thread
Cardboard shoe box lid
And a great desire to create
First, we make paper templates, 3 circles of different diameters. I offer diameters of 10 cm, 9 cm and 8 cm.
We cut out 4 pieces of each diameter from organza. For convenience, fold the organza 4 times and cut out a circle.
We fold each circle twice, cutting the folds 1 cm short of the end.
Hold it by the uncut tip and round the corners. This is what should happen:
The blanks are ready for further processing. Burn the petals over a candle.
Moving the petals apart, we singe between the petals.
The singed petals are ready for assembly.
For ease of assembly, I suggest making the following device (The idea is not mine, I saw it on the Internet. Thanks to the author.) Thread the needle and insert the eye into the cardboard box.
We string the petals onto a needle, starting with the largest. In the process we straighten it, giving it a beautiful shape.
When all the petals are strung, pull out the needle, stitch it several times and secure it.
Decorate the middle with beads. The flower is ready. If you want to make a brooch, then continue!
Cut out a circle from felt, slightly larger than the size of a pin. We make small slits to insert a pin.
Glue the pin to the flower with glue. Our brooch is ready!
What your flower will be like depends only on your imagination! Good luck and creative inspiration to you!
You can see my other works here:
Organza is a stunning and airy material from which gorgeous outfits are made. You can easily make gorgeous organza flowers with your own hands with a candle or lighter on hand. Since the fabric can melt, by melting its edges you can create any flower design.
Organza flowers are made from circles of different sizes. Each circle must be carefully scorched over a candle or using a lighter. Then all that remains is to collect all the petals and sew them together.
After being treated with fire, the fabric takes on an unusual appearance. Assemble the flower - sew it in the center and decorate with beads. 
If you cut flowers with petals or squares, for example, from organza flaps, then after processing and assembly they will turn out perfectly.
Flowers from circles folded in four
Another type of organza flower is a little more complicated. Here you need to cut out circles of the same size and singe each of them along the edge. Then, one by one, fold each circle in four and stitch it with thread.
If the fabric is of a different color or structure, you will get a rather original flower that can be used to decorate curtains or make a composition.
DIY organza roses
Stiff organza makes gorgeous roses. In order to make a rose, you need to cut a ribbon about one meter long (the excess can be cut off) and 5-6 cm wide. 
Depending on which way you wrap the petals, the appearance of the flower will be different. If organza rose petals are wrapped inside, it will be a bud. By the way, you can use a shorter ribbon for the bud.
