Beeline smart box in a network environment. How to set up Smart Box from Beeline

The Beeline Smart Box router is one of the devices offered by the provider for connecting to the Internet. It implies wired access to the network, so the purchase of a SIM card is not required. There are no slots for it on board the gadget. Reviews about the device highlight the supporters and opponents of the device. The latter are a large percentage, which is explained by the shortcomings of the router itself and the incompetence of users who do not know how to set up the Smart Box if the settings are wrong, which is typical for any custom wired and wireless network.

General features of the Smart Box Router

Like its counterparts, the Smart Box router is designed to create a single network between several computers and distribute Wi-Fi. The device is equipped with:

• Wi-Fi module for wireless transmission traffic
• 4 inputs for wired network connection.

The Beeline Smart model is ergonomic, designed in a strict business style. Color black or white. A WiFi router is a flat, small box that can be placed on a stand or attached to surfaces, such as a wall. The glossy indicator panel is made of plastic with built-in bright LEDs that piercingly illuminate the premises in the dark. Ports for connecting wires are located on the back of the device. The device comes with detailed instructions describing its characteristics, as well as detailed recommendations for setting up the router.

Specifications Smart Box

4 LAN connectors are offered for the same number of devices. In line with the LAN is the fifth main WAN connector, which serves to connect the gadget itself to the Internet supplied by mobile operator beeline. A cable pre-installed by the provider's specialists is inserted into the WAN. Wi-Fi joins:

• laptops;
• personal computers with a Wi-Fi module;
• smartphones;
• tablets;
• WiFi printers;
• wireless IP cameras.

The instructions do not indicate how many devices can be connected via Wi-Fi. Some sources indicate the number is 16, others claim that there are 32. Wired traffic is served at a speed of 100 Mbps. Wireless reaches parameter 300.

The manufacturer has provided 3 protection algorithms. The maximum security cipher is provided by WPA2. WPA and WEP are considered less secure. The Beeline Smart Box Black router will delight fans of digital multi-channel television, as it supports IPTV. Thanks to the installed USB connector for connecting drives, the device can be used as a file server. Beeline Smart Van router modules do not allow you to connect a wired printer to it. But there is a storage mode.

Installation and configuration of the router is carried out by Beeline specialists. It is advisable to figure out how to connect and configure the device yourself. Judging by the reviews, the need to configure Smart Box Pro often arises. To connect, use the Web interface that appears on the display after connecting the computer and Beeline Smart box one. The launch of the browser is accompanied by a set of 192.168.1.1. (device address). Traditionally, login and password are used to activate the connection.

To configure SmartBox, you can use the program from the provider "Settings Wizard". A simple and clear panel, thanks to the instructions, can be configured even by a child. An accessible description of where to click allows, in case of failure of the specified parameters, to return them to their original position without the involvement of specialists. The main advantages of the router: ease of use, devices are easy to connect, the characteristics of the device distinguish it from most analogues. The cost of the router together with the connection is 2,500 rubles. It is sold in the communication salons of the provider.

Of the shortcomings highlighted by users in the reviews, there are often references to periodic disconnections and unplanned reboots of the router. They speak unpleasantly about the narrow Wi-Fi coverage area and its gradual narrowing, which appears after some time.

During the operation of the Smart-Box router, users need to reconfigure the equipment, for which they need to enter an individual login and password. But what if the password from the router is irretrievably forgotten or lost and cannot be recovered?

In this case, you can unlock the router Beeline Smart-Box by resetting the settings and then entering the credentials and password, including.

What to do if you forgot the password from the Smart-Box router?

To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the existing settings, it is no longer possible to change the password. It is required to perform a factory reset, and then enter the necessary data, following the recommendations below.

1. Make sure that the computer's network cable is connected to one of the LAN ports located on the device.
2. The cable that is brought into the apartment must be connected to the WAN port.
3. Press the "Reset" button located on the router case.
4. On a computer, open an existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome page for managing the wi-fi router will open. Click on the "Continue" button on the screen.
5. On the “Start over” page that opens, you must enter the standard login and password. Enter the word admin in both lines and click Continue.
6. In the menu that appears, select the section - "Quick Setup".
7. Here you need to fill in several subsections, described below.

In the "Home Internet" field, enter a new username and password. Other Beeline home Internet settings are already embedded in the device's memory and do not require adjustment.

In the “Wi-Fi network of the router” subsection, you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).

“Guest Wi-Fi network” has similar characteristics to a home network, here you also need to enter a name and come up with a password.

In the "Beeline TV" field, you need to select the port for connecting the set-top box. This option is relevant if, in addition to home Internet, you also use Beeline television. You need to fill in this subsection only when connecting a TV cable to the Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.

After completing all the necessary settings, click "Save".

Saving the settings will take some time, usually about 1 minute.

After making an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.

Reset router Beeline Smart Box

In order to reset the router, you need to find the "Reset" button on the side where the ports for connecting cables are located. It must be pressed with a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be kept pressed for 10-15 seconds until the indicators on the front of the device blink. After that, the router will boot with standard settings and will be completely ready for configuration according to the instructions above.

Do not forget to write down the new login and password in order to quickly make the necessary settings changes without resetting the router!

Video: Instructions for setting up a Smart Box router

Joined by promotion "House of the 21st century+" and they brought you to the apartment on the day of connection Wi-Fi router Smart Box. As a rule, all equipment settings are carried out by the installer when connecting. There are situations when, for some reason, your router settings have gone wrong and you need to reconfigure your Smart Box. For this, instructions are given below.

The main parameters of the Smart Box router:

• Router address - 192.168.1.1
• The latest firmware is 2.0.11
• The username for accessing the device is admin
• The password for accessing the device is admin
• Network name (SSID) - Smart_box-XXXXXX (where X are characters unique for each device)
• Wireless network key (Wi-Fi) by default - no key

Connecting a Smart Box Router

1. Insert the cable brought into the apartment by our installers into the WAN port, and connect the computer with a patch cord (cable) from the router kit to any of the LAN ports. You can also connect your computer to a router via a Wi-Fi network, but at the first stage it is still better to use a cable connection.

Connection setup

2. So, you have connected the router to the computer and to the cable from the entrance. Next, open your browser and enter 192.168.1.1 in the address bar. You should be taken to the welcome page. Click on the button Proceed.

3. The setup program prompts you to enter a username and password. Enter in the first field admin, and in the second admin. Click Proceed.

4. Now you will be taken to the main menu Press the button Quick setup.

"Home Internet"- in this section, the connection to the Internet is set up, all the data that is necessary for connection is contained in the device's memory, you only need to enter your username and password from the contract in the appropriate columns.

"Wi-Fi network of the router"- in this section, you have the opportunity to set up a wireless home Wi-Fi network. In field Network name you need to come up with and enter the name of your network, for example free_wifi, and enter the network key in the password column in order to protect your connection from unauthorized access. Please note that the network key must be at least 8 characters long, including numbers and letters of the Latin alphabet.

"Guest Wi-Fi Network"- it is possible to set up a guest Wi-Fi network.

Beeline TV- if you are also a TV subscriber, you need to select the port (LAN1, LAN2, LAN3, LAN4) to which you will connect the set-top box. In the event that you are viewing channels on a PC or using an Xbox 360, you do not need to configure port forwarding.

To save the settings, press the button Save.

6. It will take about 1 minute to save the settings and connect to the Internet router.

As soon as the connection is established, opposite the line Status a message will appear "Internet connected". Congratulations! Smart Box Router fully configured for networking Beeline.

Smart Box Firmware

First, download the firmware - smart_box_2.0.11.img

1. Having opened the browser, we go to the page 192.168.1.1? enter login admin, password admin and press the button Proceed.

2. Click on the button Advanced settings

4. A page with advanced router settings will appear. In the menu on the left, click Software Update. Click on the button select a file and use browse to select the location of the downloaded file. Next, you can click the button Perform an update.

5. Wait for the device to update the firmware, it takes about 5 minutes, after that the router needs to be rebooted (pull out and insert the power cable of the router back). Your Smart Box is ready to go.

Beeline (formerly Bee Line GSM) is a well-known telecommunications brand that is the third largest wireless operator in Russia and the second largest provider of general telecommunications services. For more than 20 years, the company has been successfully operating not only in Russia, but also far beyond its borders: Armenia, Georgia, Ukraine, Kazakhstan, Kyrgyzstan, Vietnam, Laos and Australia - these countries also have numerous Beeline subscribers.

Beeline is not only a supplier of quality cellular communication, but also high-speed Internet for smartphones, tablets, computers and other smart gadgets. The speed of the Internet is constantly increasing and since 2013 it has reached a completely new level. These services now require more powerful hardware.

Beeline Smartbox is a branded device that will allow you to combine several computers, mobile devices and even SMART TVs into a single local network and provide them with Internet access. In this article, we will get acquainted with setting up a Smart Box router from TM Beeline.

Beeline Smart Box is a Wi-Fi-enabled router, which is manufactured in Taiwan by Sercomm by order of Beeline. This device has support for wired multicast IPTV and a network storage option. Having such a device at home, you can use the Internet on 10 devices at the same time, without losing signal quality and speed. You can create a closed network and organize a highly secure Internet connection.

The technical characteristics of the Beeline Smart Box model are quite impressive:

• This is a Wi-Fi router that works according to the 802.11b / g / n standard;
• Signal transfer rate - up to 300 Mbps;
• Reference board - Realtek 8197D;
• Operating modes - DHCP client, static IP, L2TP, IPoE;
• 1 USB port - version 2.0;
• LAN connectors - 4 pieces;
• Current software version: 2.0.19 (14Mb).

Smart Box Beeline routers have a USB port, which means that you can connect external drives to it and share them using your own local network.

Today, Beeline offers its users four models of Smart Box wireless routers:

• Dual-band SmartBox TURBO + (3.6 thousand rubles);
• Dual-band SmartBox ONE (2.5 thousand rubles);
• 5GHz SmartBox PRO (5.9 thousand rubles);
• 2.4GHz Beeline SmartBox (2.5 thousand rubles).

Device connection

To connect the Beeline Smart Box Wi-Fi router, you need to decide which connection you want to establish:

• wired;
• By Wi-Fi.

The first option is more convenient to use for the initial connection. To do this, install the cable that the Beeline operator brought into your apartment in the extreme socket of the router marked "WAN". After that, connect the router to your computer with a fiber optic cable (patch cord): one end of the cord must be installed in one of the four connectors on the router marked LAN, the other end - in the PC network card.

To configure the operation of the router via a Wi-Fi router, you will only need to connect it to the provider's cable (via the WAN connector) and start searching for new equipment on the computer.

Setting process

We will configure the Smart Box through a web browser on a computer. After connecting all the cables, turn on the computer, launch the browser and type the combination "192.168.1.1" in its address bar. This is the IP address of your device on the local network. You can see this data on the back of your Wi-Fi router. The username and password are also indicated there, which we will also need for further configuration.

When you enter the configurator for the first time, you will see a welcome window. Click the button "Proceed", and a new window will open in front of you, in which you will need to enter your username and password. By default, for all Beeline subscribers, this is admin / admin.

Now you need to activate the menu button "Quick Setup". The setup form is quite simple, each section has its own hints, but even without them everything is intuitive. Here you will need to enter the following data:

for home internet:

• Login is the number of your contract with the provider;
• Password - a combination for accessing the Internet, which was determined by the provider.

for the Wi-Fi network of the router:

• Network name - come up with a name for your Wi-Fi connection (SSID);
• Password - create secret cipher to enter the Wi-Fi network (from 8 characters).

for guest Wi-Fi network (optional):

• Set the same parameters for the guest wireless network of your router.

for the Beeline-TV service (optional):

• These are the television settings (here you will indicate the number of the LAN connector into which you will connect the TV receiver).

Save the entered data and wait until the equipment applies the new settings to its work. That's the whole process of setting up the router, now there is Internet in your house.

If you do not want the wires to spoil appearance your home, you can establish a wireless connection, but for this, your PC or laptop must have a built-in or separately purchased Wi-Fi adapter:

1. Turn on the Wi-Fi function on your laptop (or PC).
2. Open the menu "Control Panel".
3. Find an item in it. "Network connections".
4. Go to section "Wireless Network Connection" and select the network you want to connect to.

Today, all new routers can operate in two frequency modes:

• At a frequency of 2.4 GHz;
• At a frequency of 5 GHz.

The first option is more common, but many devices operate at this frequency, so there may be interference in the network. Almost no one uses the 5 GHz frequency, it has a slightly shorter range, but the purity and speed of the signal are higher .

After you have selected the desired channel, you will only have to enter your login and password for a secure Wi-Fi network and save all the changes made.

The operator's website has three special detailed instructions for connecting a computer, mobile devices or SmartTV to the Wi-Fi network of the router - https://moskva.beeline.ru/customers/help/home/domashniy-internet/instrukcii-dlya-mob-ustroistv/

Now let's get acquainted with the instructions for setting up a Wi-Fi network on a Beeline Smart Box router:

1. In the address bar of the browser, enter the IP address of your device - "192.168.1.1".
2. In the menu that opens, select the item "Advanced settings".
3. Find the tab at the top of the window Wifi and go to this menu.
4. In the navigation list, fame, select "Main parameters".
5. Opposite the line "Turn on wireless network (Wi-Fi)" should be checked.
6. Below you can make any changes to the main parameters of the wireless network of the router (operation mode, select a separate channel number, disable the guest Wi-Fi network).

Save all the changes and go to the next section of the "Wi-Fi" tab - "Safety". At this stage, you can set the most secure type of encryption: set the authentication value to WPA2-PSK. Save these changes and reload the program.

Please note that if there are devices in your apartment that do not support the WPA2 Wireless Device Certification Program, then it is better to leave the authentication value at the default - WPA-PSK.

WPA is an 802.1X standard, while WPA2 is designated by the IEEE 802.11i standard. Since 2006, all Wi-Fi devices have been released with WPA2 support.

Firmware for Smart Box

Smart Box is a device that runs on its own software, so it is very important that its software firmware is always up to date. You can find out the latest firmware version and download it from this official website of the operator.

To download the update, you will only need to follow five steps:

1. In the address bar of a web browser, type the IP address of your router - "192.168.1.1".
2. Go to menu "Advanced settings".
3. Find the tab at the top of the window "Other", and in the navigation menu on the left - section "Update".
4. Specify the path where the file is located with new firmware, and click the button "Perform update".
5. Wait for the download procedure to complete and the equipment to automatically reboot.

Starting with firmware version 2.0.25, smartboxes have the ability to work with 3G modems in Wi-Fi mode.

The Smart Box Beeline router can work with other Internet providers. If the new operator provides Internet network services using the DHCP dynamic configuration protocol or uses the PPPoE link layer network protocol, the equipment setting can be easily changed in the user account.

Note.

SmartBox TURBO+ is the latest Wi‑Fi solution for the apartment.

Dual Band Wi-Fi Transmitter - 2.4 / 5 GHz. New, more powerful processor.

Wi-fi router of the new generation SmartBox TURBO+ comes to replace the previous SmartBox. It is equipped with a dual-band Wi-Fi transmitter (2.4GHz + 5GHz) and an improved processor, which will allow you to receive a more reliable Wi-Fi signal throughout your apartment.

Wi-fi router of a new generation - designed specifically for the simultaneous connection of several users at high speed:

• Confident reception anywhere in the apartment
• Two Wi-Fi networks in your home in one router (2.4Hz and 5Hz)
• Speed ​​support up to 1 gigabit
• Four built-in omnidirectional antennas
• Ergonomic design
• Interface for quick setup of Beeline Home Internet
• Provided on favorable conditions in sets "Close people 5" and "Close people 6", as well as "Fantastic MAX".

Wi‑Fi router Beeline SmartBox TURBO+ designed to connect to Home Internet "Beeline" via a dedicated Ethernet line. With it, you can create your own home network, access the Internet from several computers, tablets or smartphones (the number is not limited).

The built-in Wi-Fi access point of a new generation with an extended range allows you to connect laptops, game consoles, media players and other network devices to SmartBox TURBO+. Convenient interface quick setup will help you set up Internet access and connect the Beeline IPTV set-top box for Home Television without asking for the help of specialists.

Purchase options for a new connection

• Purchase immediately: 3600 rubles. ;
• Installment purchase: 150 rubles/month for 30 months;
• Included for 0 rub. on the terms of a specific tariff;

All equipment is delivered by the installer to the client's home on the day of connection, if it was ordered when drawing up an application for connection.

! If you are already an existing client of Home Beeline, you can purchase this model yourself at the Beeline sales office or through the online store.

Specifications