On the eve of important dates and holidays, it is customary to prepare gifts and congratulations, and beautifully decorate apartments and offices. As a rule, to create original jewelry, simple materials are used - paper, fabric, wire, beads, sequins. Today we will learn how to make paper flowers with our own hands for March 8, Birthday, September 1st. We have prepared simple, easy master classes with step-by-step photos and videos, diagrams, and paper flower templates for cutting. With the help of our interesting lessons for beginners, you can create large voluminous flowers to decorate the interior, as well as put together a touching bouquet as a gift for your mother or grandmother. So, several homemade beautiful flowers from corrugated, colored paper will become an element of decor for a postcard, gift box, or candy bouquet. Many of our “flower” master classes are quite suitable for kindergarten and primary school. So, let's create beauty!
DIY paper flowers for children - easy step-by-step master class with photos
Children's crafts made from scrap materials are a great gift for mom or grandma on March 8, Mother's Day. As a rule, most often for their hand-made masterpieces, children choose colored or corrugated paper, from which they make beautiful appliqués, postcards using the origami and quilling techniques. We suggest making paper flowers with your own hands by studying an easy step-by-step master class with photos - and you will get cute daisies.
Materials and tools for the paper flower master class:
- corrugated paper – white, yellow
- wooden stick (skewer)
- sticky tape - green
- scissors
- thread
Step-by-step instructions with photos for a master class on a children's craft - a paper flower:
- First, cut a strip of white corrugated paper and bend it 2 - 3 times.
- On one side you need to cut out the flower petals.
- Take yellow paper, cut a strip and fold it several times. We make small cuts as in the photo.
- We roll up the yellow cut paper and attach it to a skewer.
- Now we twist the white petals slightly to one side, imitating a natural bend.
- We coat the lower part of the white strip with glue. Then we apply a skewer with “stamens” at one end and begin to roll, heading towards the other end.
- We wrap the finished flower at the base with thread.
- We wind green adhesive tape over the thread and towards the bottom - the stem turns out just like a real one.
- For a gift to your mother or grandmother, it is better to make a bouquet of several flowers (unpaired number). Alternatively, such a flower can be used to create a tabletop composition or a beautiful greeting card.
Beautiful paper flowers for March 8th - how to make them yourself step by step, photo
With the onset of spring, nature wakes up, primroses appear in the thawed areas - crystal snowdrops, delicate crocuses, majestic daffodils. In addition, already at the beginning of March you can admire the bright yellow fluffy branches of mimosa, which has become a symbol of the main women's holiday. In honor of March 8, I really want to please my beloved mother and grandmother with paper flowers - made by the hands of children, they look especially touching. Beautiful DIY paper flowers in our master class are quite within the capabilities of children 5-6 years old, but older children will also be happy to take part in making the craft. A little patience, step-by-step following the instructions - and you will get the best gift for Women's Day.
List of materials for creating paper flowers for March 8th:
- colored paper, corrugated
- yellow threads, yarn
- wire
- scissors
- long sticks (skewers) made of wood
Master class on creating flowers from paper and thread, step by step with photos:
- We start by making mimosa “balls” - we will need wire and yellow yarn. Open the blades of the scissors slightly and place a wire between them (as in the photo). We wind the thread tightly, in several layers, and then bend both ends of the wire upward. The coils of yarn end up inside.
- We connect the sides of the wire together and scroll several times, tightly encircling the skein. Then, on the other side, we cut the threads and get a fluffy pompom - a mimosa ball.
- We wrap the wire stalk with a strip of green paper, the tip of which is fixed with glue. We begin winding the stem.
- After making a couple of turns, we attach the second ball.
- Then, as you go, add another 5 - 6 pom-pom balls, placing them on both sides of the stem. The result should be a mimosa sprig with yellow “flowers”.
- Now we cut a strip of green corrugated paper 4 cm wide. On one side along the entire length of the strip we make cuts in the form of a thin fringe (about 2/3). We coat the other side with glue.
- We begin to wrap the prepared strip around a wooden stick, gradually moving towards the bottom - do not forget to straighten the fringe.
- We collect ready-made flower balls and green mimosa branches into a bouquet - a great gift for March 8th! As you can see, it is quite possible to make beautiful flowers with your own hands, almost as good as real ones. Happy holiday!
Do-it-yourself large volumetric paper flowers - step-by-step lesson, diagrams, templates
To decorate interiors, you can use various designer “things” that give the room a certain style and individuality. All kinds of figurines, photo frames, panels, topiaries, floor compositions - today you can purchase all kinds of decorative elements to suit every taste. However, at all times, hand-made decorations were more valued - paper flowers, garlands, lampshades, appliqués, embroidery. Our step-by-step master class with photos is devoted to creating large volumetric flowers from colored paper to decorate a room. With the help of the presented diagrams and templates, the process of making paper flowers will be much easier and faster - and the result will simply be amazing!
What materials will you need for the master class on volumetric paper flowers:
- thick cardboard
- corrugated paper
- simple pencil
- scissors
- large wire
- green floral ribbon
- adhesive tape
How to make a large voluminous paper flower step by step:
- Before work, you need to prepare templates for individual flower elements by printing them onto cardboard or plain paper. In the second case, it is necessary to cut out the blanks and transfer them to the surface of thick cardboard.
- We attach the template to a sheet of red or pink paper and cut out 15 flower petals - 15 “hearts” and 5 “droplets”.
- Now you need to shape the cut out “heart” petals, slightly stretching their edges to the sides. We also slightly curl the droplet-shaped petals with a pencil. Then we take two pieces of large wire and wrap them together with floral tape. A piece of paper can be glued to the stem, imitating the core. Let's start forming a flower bud - attach the “droplets”, then the “hearts”, wrap them with ribbon.
- For the sepals, take green corrugated paper (look at the photo) and cut it out according to the template. We also attach the finished part to the bottom of the flower using adhesive tape.
- The leaves need to be fixed on different parts of the stem. That's it, we have a large voluminous rose made of corrugated paper, a bright and original decor for any room. Having made several of these huge flowers, place them in a floor vase - beautiful and stylish!
Paper flowers - simple templates for cutting, creating with your own hands, photos
Paper flowers are an excellent alternative to living gifts of nature, especially in the cold season. Indeed, it is so nice to receive a bouquet of roses or daisies as a gift, which will definitely not wither after a couple of days, but will delight you with their fresh appearance for a long time. However, novice handicraftsmen are not always able to create complex “masterpieces” made using different techniques. In this case, it is better to make your own paper flowers using templates - you can download and cut them out, and then transfer them to the base material. We tried to collect several simple flower templates for cutting so that everyone can choose the appropriate option. If you want to decorate the walls of a room, you can enlarge any of the templates, apply it to the surface and paint over it. In general, choose and fantasize!
A selection of flower patterns for paper cutting
DIY paper origami flowers - step by step for beginners, photo
According to sources, Ancient Japan is considered the birthplace of origami - this art form was first mentioned back in 1734. The word “origami” is translated from Japanese as “folded paper”, since no scissors or glue are required to make crafts using this technique. Today, paper figures in the origami style are still popular - children and adults continue to discover the intricacies of this ancient art with pleasure. For beginners, we have put together an interesting step-by-step master class with photos on origami - making paper flowers with your own hands is extremely simple, even preschoolers can easily cope with this.
We stock up on materials and tools for the origami flower master class:
- colored office paper
- bamboo skewers
- glue - pencil, PVA
- crepe paper - green
- scissors
- with a simple pencil
- ruler
- glue gun
Step-by-step description of the master class “Origami Flowers from Paper”, photo:
- We draw a sheet of colored paper into squares of the same size and cut them out - these are the “petals” of the future flower. To make one flower we will need 5 - 6 of these “petals”.
- The square needs to be folded diagonally and positioned as in the photo.
- We bend the side corners towards the central corner.
- Now we bend the two folded corners down exactly halfway. Then we unbend and fold the sides - the fold line should be located in the center.
- Corners have formed on the sides of the workpiece - they need to be folded down, folded into the middle and folded in half along the fold line.
- We fold the resulting diamond-shaped figure in half, and glue the “wings” together - the petal is ready. We make several of these petals and glue them to each other with their sides. As a result, we get a nice flower.
- To make the center, take a strip of yellow or white paper (size 3x7 cm). On one side we make small cuts in the form of a fringe, and screw the opposite side onto a skewer.
- We coat the center with glue and place it inside the flower. Following the step-by-step instructions, we make a few more paper flowers.
- You need to insert a skewer into each flower and fix it with glue.
- The wooden stem needs to be “camouflaged” using green crepe paper.
- Now let's start creating leaves. We cut out rectangles (5 x 7 cm), cut one side with a fringe - about 2/3.
- Glue the green leaves to the stem of the flower and straighten it.
- Such a cheerful bouquet will lift your spirits and decorate any holiday. Having chosen several flowers, put them in a vase and admire the fruits of your hands.
Simple DIY paper flowers - an easy master class for children, photo, video
Children's creativity is an endless sea of imagination, an amazing world of colors and feelings. Looking at the crafts created by children’s hands, it’s as if we are plunging into a wonderful fairy tale. We bring to your attention an easy master class in the video “Paper Flowers” - children can make stunningly beautiful things with their own hands. So, ready-made flowers will make an elegant garland to decorate a group in a kindergarten or school class. In the photo you will find several interesting ideas for a paper flower - successful implementation!
Video with a master class on paper flowers for children:
A selection of photos with ideas for simple paper flowers:
DIY paper flowers - master class for beginners, photo
With the approach of March 8, Mother's Day, the demand for fresh flowers increases - many people buy lush bouquets of tulips, roses, daisies for their beloved mothers and grandmothers. However, along with a touching congratulation, you can present your family and friends with a bouquet of flowers made from the simplest materials available. How to make paper flowers with your own hands? Our step-by-step master class with photos for beginners is designed for children over 6 years old, but preschoolers will need adult help.
Necessary materials and tools for creating paper flowers:
- thick two-color paper
- ruler
- pencil
- scissors
- narrow tape
- wooden stick
- green tape
A simple master class with photos on creating flowers from paper:
- Take a sheet of paper, measure 6 cm from the edge, draw a line and cut it. Then we retreat 1.5 cm on the strip and draw a segment.
- On the other side of the strip we cut out the cloves.
- Now the “toothed” side needs to be cut into a thin fringe, without going beyond the line.
- We apply a wooden stick to the strip and wind it, and at the end we drip a little glue to hold the bud together.
- In order for our bud to “bloom”, we need to bend the petals in different directions.
- We wrap green tape on a stick or skewer.
- We attach the head of the flower to the stem, and make the core from a piece of plasticine, a bead, a button or a strip of paper rolled into a “roll”. These wonderful paper asters can be placed in a vase or made into a panel on the wall.
Decorative paper flowers for kindergarten - how to make it yourself, photo
Colored paper is the most popular material for creating children's crafts in kindergartens and elementary schools. In preparation for various holidays, the children make their own paper flowers, flags, garlands, and openwork window decorations for the New Year. We bring to your attention an interesting lesson with step-by-step photos on making decorative paper flowers - for kindergarten, 1st - 4th grades of school.
List of materials and tools for the paper flower master class:
- white and colored double-sided paper
- paper napkins
- scissors
- stapler
How to make paper flowers according to a master class in kindergarten, step by step photos:
- Cut a sheet of white paper into strips (approximately 2–3 cm wide).
- The strips need to be folded together in the form of a circle and secured with a stapler.
- Here is a blank of the future flower.
- For the core we use a colored paper napkin - in our case it is pink.
- Now we make similar blanks from strips of colored paper and glue them in pairs.
- We decorate the wall with ready-made flowers, make garlands for windows, for the ceiling. After the holiday, it is better to remove such voluminous paper flowers and put them in a box to save until the next event.
Craft “Bouquet of Paper Flowers” - do it yourself for school using a master class with photos
To create flowers from ordinary corrugated paper, it is important to be patient so that the product turns out neat and beautiful. Among the many step-by-step paper flower master classes, we have selected one of the simplest, accessible to schoolchildren of all ages. Today we will make our own paper flowers - such a bouquet will please your mother or grandmother for its extraordinary touchingness and freshness. Follow the step-by-step photos, and soon your table will be decorated with an original craft, a real work of art.
What materials and tools will be needed for the paper flower master class:
- colored paper
- ruler
- pencil
- scissors
The procedure for making paper flowers for school with your own hands, photo step by step:
- Take a sheet of paper and measure out a strip (width 5 cm, length 10 cm). Then we retreat 1 cm from the edge, draw a line and make small cuts in the form of a fringe.
- Using a pencil, twist the strips upward.
- A green paper strip (size 4 x 10 cm) needs to be rolled into a tube, the middle and edges carefully sealed.
- We begin to glue the fringed strip onto the green tube - with the curls facing up.
- We cut out the leaves and also glue them to the stem of the flower.
- That's it, we have a hyacinth - a beautiful spring flower. To create a bouquet, you can use paper of different colors to create an original composition. A mother or grandmother will be pleased to receive such a touching bouquet of flowers from the hands of her daughter or son, grandson or granddaughter.
How to make paper flowers with your own hands to decorate the hall - video tutorial
Carrying out special events and holidays most often involves renting a large room - a banquet hall in a cafe or restaurant. As a rule, before the start of the celebration, the hall is usually decorated with balls, garlands, and decorative compositions made of various materials. Today we will try to make original paper flowers with our own hands to decorate the hall - following a simple master class in the video. Indeed, paper flowers look best as part of various compositions with the addition of fabric, decorative cords, and shiny beads. We are sure that you can bring many of the ideas from the video tutorial to life by creating stunning large flowers from bleached parchment or white baking paper.
Video with a master class on DIY paper flowers to decorate the room:
So, now you know how to make paper flowers with your own hands - for March 8, your mother’s, grandmother’s birthday. We have selected simple and easy master classes with step-by-step photos, diagrams, cutting templates, and videos on creating beautiful flowers from ordinary colored, corrugated paper. Small ones, one at a time or in bouquets, using the origami technique, large voluminous flowers for decorating the room, touching children's crafts in kindergarten and school - with the help of our lessons you can create many beautiful paper flowers. We wish you creative success!
Volumetric flowers perfectly decorate the room, if they are... When placed on the wall, they will add an unusual accent to the celebration and will be remembered for a long time.
Each has its own personality - the gentle slope of the stem or the beautiful color transitions of the petals and all this adds joy to our lives.
The proposed DIY flower models are suitable for any holiday.
Volumetric paper flowers on the wall using templates
Master class with photos of all stages of flower creation
- We will need designer thick paper in two colors: red and white. The paper size is 102 x 70 cm. You will also need a metal ruler along which you will have to work with a breadboard knife. And, as usual, scissors and a glue gun.
2. Take a petal template drawn on paper, with a petal length of 15 cm and a width of 16.5 cm. The horizontal stripe at the bottom of the petal measures 7.5 cm.
3. Carefully cut out the template with scissors.
4. The template is cut along the borders without much difficulty.
5. Place the cut out template on a red sheet of paper and cut a strip according to its width (with a little margin).
6. Then we place the petal template on the strip along the height and cut off the square. Place the cut square on top of the strip and cut the required number of squares.
7. Place the template on top of all the stacked squares and secure it with a clothespin.
8. It’s easy to cut out 5 red petals at a time. The first row will require 7-8 petals and they are already cut out.
9. Measure the width of the second strip according to the template and cut it off. One strip for the petals of the 1st row will not be enough.
10. From one of the squares, cut out a red circle with a diameter of 14 cm. This will be the center of the flower. We place the circle on the table and try on two petals with the opposite arrangement. The petals extend onto the circle within 1 cm. We mark this size on the circle for gluing with glue.
11. The flower should be about 40 cm in diameter.
12. Now you need to cut each petal of the first row in half to the center, as in the photo.
13. And now, using a glue gun, we will create the volume of each petal.
14. Take a glue gun and apply a thin strip of glue along the length of the cut and glue the cut parts together, overlapping. In this way we give a three-dimensional shape to all the petals of the first row.
We form voluminous flowers for the petals of the 1st row
15. Take a glue gun and apply glue to the back side of the bottom of the volumetric petal. Press the part of the petal coated with glue onto the circle, as in the photo.
16. Repeat the same steps with the second petal and glue it to the circle, overlapping the first petal.
17. We continue to glue and assemble the volumetric petals of the first row.
18. The first row of paper flower petals is ready.
Assembling the petals of the 2nd row
19. Draw a petal template for the 2nd row on paper. Its dimensions are: height 13 cm, width 14 cm and at the base the horizontal width measures 6 cm.
20. Now we perform all the same actions when forming the 1st row: we place the template of the petal of the 2nd row on a sheet of paper, cut off a strip of the required width, put the template on the strip and cut into squares.
21. Use a paper clip to secure the template to the stack of squares and cut out the petals for the 2nd row.
22. Cut the petals of the 2nd row in half to the center, apply glue along the edge of the cut and glue with an overlap. The volumetric petals of the 2nd row are ready. Glue each petal into the central circle of the flower, overlapping each other.
23. The second circle of petals is glued.
Assembly of petals of the 3rd row
24. Draw a petal template for the third row on a piece of paper with the following dimensions: petal height 11 cm, width 12.5 cm with base length 6 cm.
25. Cut out the petals for the 3rd row and glue them to the central circle, performing all the same actions when creating the 1st and 2nd rows. Row 3 is ready and it consists of 5 petals.
Formation of the middle of the flower (stamens)
26. Volumetric flowers with a center look more original. On a sheet of white paper we measure 16 cm. Let’s say in advance that the height of the stamens is intended to be 8 cm.
27. Cut a strip of white paper 16 cm wide.
29. In order not to injure the table, we place a sheet of thick paper, place a white strip on it and, using an iron ruler and a breadboard knife, cut the strips within 7-8 mm from both edges of the strip. The thinner you cut the strips, the more delicate the middle will be. A maximum of 0.5 cm is allowed.
30. On the red stripe we also cut very narrow strips. Can be cut with a sharp stationery knife.
31. The paper is double-sided, so we glue both cut strips along the edge on one side.
33. And we glue the second edge of both strips together, it will be a little more difficult due to the different widths.
34. This is what the glued cut strips will look like from the side.
35. Apply glue from a gun and press the edges of the strips tightly.
36. Once again, apply glue to the edges of the glued strips and press them together again, as in the photo.
37. It will be a little difficult, but you should cope with it without any problems.
38. Then, like this, we will twist the middle of the flower with white and red stamens, periodically applying drops of glue. It is very important that the base of the flower is level.
39. Before gluing the center, you need to think about how the flower will be attached to the wall: using double-sided tape or a wire loop.
40. We pierce the floral wire (or another) not in the middle of the flower, where it is thin, but where the petals are glued, right through them in two opposite places of the circle, slightly stretch it and drip glue into the holes with the wire.
41. Apply glue to the lower part of the center with stamens.
42. And press with our palms in the central circle of the flower.
43. The middle is glued. The flower turned out to be large and voluminous.
You have learned how to create three-dimensional flowers with your own hands using templates.
How to make voluminous paper flowers with your own hands - video
Between large flowers there is always space that can be filled with smaller flowers of a different color. In this video, voluminous flowers are made white and also original.
Smaller flowers dilute the wall decor and make it more attractive.
Large paper flowers - master class
Now we’ll learn how to make large decorative tropical flowers that you can use to decorate a wall and transform your home in an original way for a party.
Instructions for creating large flowers
- We create petal templates with our own hands. First, let's draw the large petals for the first row of the flower.
3. Cut out the drawn template.
4. Place the template on a sheet of yellow paper and use a pencil to draw 5-6 petals according to the template.
5. Make a small cut at the base of the petal.
6. We bend the upper part of the petal, giving volume, and glue the cut with an overlap as in the photo.
7. Volumetric petals are ready.
8. Glue the petals together at the bottom, also overlapping.
9. About the same as in the photo.
10. The first row of petals is glued together.
11. For the second row, make the petals a little smaller.
12. Glue the second row of smaller petals overlapping. We place the fragments of the petals so that they cover the joints of the petals of the first row.
13. For the third row, draw a petal template even smaller than the previous one and repeat all the previous steps.
14. Making the central part of the flower. Fold the rectangular sheet in half and make cuts on the fold side.
15. Unbend the sheet and bend it in the other direction, gluing the edges.
16. The edges should be glued evenly.
17. Roll into a tube, gluing as you go.
18. Apply glue to the bottom of the tube.
19. Press the tube with stamens to the center of the flower and secure it with glue.
20. These beautiful paper flowers can be made in any color according to your imagination.
Large voluminous flowers are made simply and easily.
Video about how to easily and simply make a large paper flower
Volumetric flowers on the walls of a festively decorated room lift your spirits and evoke approval.
To make beautiful paper flowers, you will need different types of paper, scissors and good instructions on how to make a paper flower. For example, one of the video lessons offered in our selection. No oral stories or drawings can replace videos - such master classes are understandable and can be easily repeated with your own hands.
The art of making paper flowers is attractive to both adults and children. There are lessons that are simple enough for a child to master, and an adult can make a bouquet of flowers out of paper that will decorate the room for a long time. Choose a lesson that suits you, select the necessary materials and start creating.
To make a paper rose, you will need a sheet of red paper, green paper for the leaves, and a skewer for the stem. And, of course, scissors and glue. A sheet of paper is marked into strips the width of a ruler, approximately 2.5 cm. Next, these strips are cut off from the sheet. Two strips should be enough for one rose. Each pair of strips is glued to each other.
Next, the tape is bent at a corner and begins to wind, forming petals bent back. The end of the tape is glued - the rose is ready. For each rose, identical leaves are cut out of green paper. A skewer is glued into the middle of the rose, and leaves bent in half are also placed on it with glue.
Video lesson:
To make paper flowers with your own hands, we will need colored paper, scissors, pencil and glue. You will also need a round object, which is applied to a sheet of paper and outlined with a pencil. The resulting circle is cut out, then a spiral is cut out of it. Next, this entire spiral is wound around the pencil, starting from the outer edge.
The resulting roll is glued on all sides and glued with its end to the round center of the spiral. If you now unravel the roll a little, it will look like a small rose. Slightly turn the edges of the spiral outward, so they will look even more like petals.
Video lesson:
To make a tulip from paper, you will need a sheet of red paper measuring 15 x 15 centimeters and a sheet of green paper measuring 15 x 8 cm. To make the tulip itself from a red sheet you need:
- fold the sheet diagonally in two directions successively;
- fold the sheet into a rectangle, also in two directions;
- fold the triangle, bending its sides inward;
- bend the edges of the resulting triangle.
Further bends are better visible on the screen. The paper triangles are folded, tucked into each other, and eventually the edges of the corners are folded back to form tulip petals. A tube is rolled out of green paper, which will be the stem of the flower. Leaves are glued to it.
Video lesson:
To make flowers you will need sheets of green, pink and yellow paper, scissors and a stick of hard glue. Take a strip of green paper 2 cm wide and coat it with glue, after which it is rolled diagonally into a tube. This will be the stem of the flower. A strip of yellow paper is folded several times and small cuts are made on it.
The strips between the cuts are folded to the side, and the entire yellow tape is wound around the stem. This is how the yellow stamens of the flower are obtained. From a square of pink paper measuring 6 x 6 cm, a small bag is formed with the edges bent outward - this is the flower petal itself. Leaves are cut out of green paper and glued to the stem.
Video lesson:
An interesting 3D postcard can be made from paper. When it opens, voluminous paper flowers unfold inside it. To make it you need a sheet of colored cardboard, seven paper squares measuring 9x9 cm, and, of course, scissors, glue and a felt-tip pen. Flowers are cut out from white paper. To do this, fold a square of paper three times diagonally.
On the resulting small triangle, draw a semicircle and cut off the excess paper according to the markings. The result is a flower with wavy edges. We make seven of these flowers. One of the petals is cut out from each flower. Next, the flowers are painted, except for one petal adjacent to the cut out one. How to glue flowers is shown in the video.
Video lesson:
This is a very simple way to make beautiful flowers from colored paper. Roses can be any color, even if they are not found in nature. To make a rose, you need to take four paper squares and fold them diagonally three times. Make a semicircular cut in the resulting triangle and cut off the tip of the sharp top.
Unfold the leaves that make eight-petalled rosettes. In the first rosette one petal is cut out, in the second - two, in the third - three and in the fourth half of the petals are cut off. Next, the edges of the cutouts are connected and glued together, forming three-dimensional structures. Cut out petals will also be used.
Video lesson:
To make large flowers from paper, you need to use five sheets of A4 paper, with which you need to do the following operations:
- cut a square from each sheet;
- fold the square diagonally and bend the corners of the resulting triangle to its apex;
- straighten the bent corners;
- The corners are folded several times, and then the structure is glued into a bag, inside of which there are several folds of paper.
The bags are glued to each other, and you get a large lush flower with a beautiful center, into which you can glue a stem or hang it on a thread.
Video lesson:
To make a rose, you will use a red A4 sheet and part of a green sheet for a stem with leaves. We cut out four squares measuring 10 x 10 cm from red paper. Each square is folded diagonally, then again and again, that is, each one is folded three times. On the resulting triangle, mark the required petal shape with a pencil and cut it out using scissors according to the markings.
The first triangle you cut out is the template for cutting out the rest. We unfold four eight-petal blanks. For the first, one petal is cut out, leaving a strip for gluing, for the second, two, for the third, three, and for the fourth, 4. On all blanks, the petals are curled.
The blanks are glued together with the outer petals and become voluminous.
Video lesson:
The procedure for making paper daisies:
- we wrap a strip of green paper around a toothpick to form a stem;
- on a strip of yellow paper folded in four, make small cuts on both sides;
- fold a strip of white paper and a cut strip of yellow paper like an accordion;
- We tie the middle of the accordion with thread;
- round the ends of the petals;
- glue the accordion onto the stem and straighten the petals, which form a two-tier structure with a yellow insert in the middle.
The origami paper flower is ready. By making several of these flowers, you will get a wonderful bouquet of bright and beautiful daisies.
Video lesson:
Having corrugated paper of different colors, you can make beautiful and lush flowers from corrugated paper, the creation sequence of which is shown in the video tutorial. A strip of several layers of paper is folded like an accordion so that a neat square is obtained.
Two holes are pierced in its center with a needle, a wire is threaded through them and twisted. On the square, a compass is used to mark a regular circle along which a circle is cut. Small cuts are made along the perimeter, giving terry to future petals. Each layer of petals is crushed upward, resulting in a lush double flower.
Video lesson:
Spring is just around the corner, and that means it’s time to take care of the appropriate decor for your home, office or classroom. We suggest using a variety of flower patterns as decoration that you make yourself from corrugated or any other colored paper. Moreover, making paper flowers with your own hands is quite simple.
The flowers and compositions shown in the photo may seem too complicated to make at first glance, especially if you are still new to needlework. However, everything will turn out to be much simpler, you just need to stock up on the necessary materials and tools and get started! Step by step you will see this.
Let's start with simple options that are easy to do even for beginners.
Tools and materials for paper crafts
For the first craft you will need scissors, glue, a round pencil and colored paper - green for the leaves, and the color you need (red, orange, pink, yellow) for the petals of your future flower. In the photo you can see the manufacturing process, and despite its simplicity, the craft turns out very beautiful.
The next flower is even easier to make, however, to develop comprehensive skills, we recommend doing this work too, especially since the result of your efforts will be worthy.
You will need:
- soft wire,
- colored paper,
- tape (transparent and colored),
- buttons of the appropriate size and color,
- thick colored paper (suitable glossy magazine pages, notebook covers, etc.).
The whole simple process is visible in the photo:
Paper aster
Developing the theme of the first flower, let's do something more complex, for example aster, which also looks very good. To do this, cut out blanks from red, orange and/or pink paper, as shown in the figure. Each blank should be slightly smaller in size so that the resulting voluminous flower head is obtained. The layers are glued together with any suitable glue (hard or PVA) and then a piece of wire is threaded through them - the future stem, which is pasted over with green paper or colored tape. Glue the leaves to the stem, fill the middle (yellow plasticine, a piece of foam rubber, a colored cotton ball, etc.).
DIY paper calla lilies
Calla lilies- very delicate and beautiful flowers that are good to form into bouquets. Japanese craftsmen offer a simple and very successful way to form a flower, which requires soft wire, colored paper, green tape or paper for finishing the wire stem. Having made the required quantity, form a bouquet.
Instructions: paper flower garland
A flower garland also looks good in the interior, which can be hung either horizontally with a slight sag or vertically by hanging several of these garlands of different lengths. To do this, string flower balls made from any type of colored paper that you have on hand onto a strong colored thread (or vice versa, transparent fishing line, as you prefer).
To create such a ball, you need to repeatedly fold a colored sheet as shown in the picture, then fasten it in the center of the resulting multilayer strip in a suitable way (usually tied with thread) and trim the edges with scissors, giving them a round shape. We unfold (fluff) the flower and string it on a thread or fishing line.
Create a lily of the valley or geocinth
The next paper flower can be called lily of the valley, And hyacinth, since in its finished form it resembles both. Personally, it reminds me more of hyacinth, but let’s not get hung up on the name, it’s better to stretch our fingers and get to work.
Here you will have to tinker a little longer, but there should not be any difficulties. Everything is clearly visible in the picture, we only note that in order for the strips cut on the sheet to curl, you need to run scissors (with the correct side) over them, pressing quite firmly. To make the flower fluffy and curly, we wrap the blanks onto a stick covered with green paper as tightly as possible, starting from the top, coating the “stem” with glue.
In the second photo the option is somewhat simpler, the inflorescence is made according to the principle of green leaves from the first option:
Corrugated paper color options
There are many options for making paper flowers, but most of them have many similar features, such as modularity. If you have made the models we suggested above, or already have good needlework skills, the selection of photos below will help you replenish your collection of crafts and adequately decorate your room. Good luck!
