Tikkurila paint for interior woodwork. Tikkurila for indoor and outdoor use. Tikkurila paints for outdoor use

Concern "Tikkurila" - a major manufacturer of paints and varnishes intended for the treatment of wooden surfaces. In European countries, he is the leader among the manufacturers of this material.

Advantages

Paints "Tikkurila" for outdoor woodworking were created for the harsh northern conditions of Finland, therefore they are the most effective in use. They perfectly protect against mechanical and atmospheric loads. Paints "Tikkurila" for outdoor woodwork prevent the formation of mold and fungus, they are resistant to fading in the sun. They also reliably protect the surface that they have processed from the effects of climatic factors. This is an important property of this material. Tests show that Tikkurila paints for outdoor woodwork, thanks to a three-layer system, which includes a primer antiseptic and 2 layers of top paint, achieve maximum surface protection. At observance of all technologies of drawing the specified material makes more than 10 years.

Primer Tikkurila-Everal or Tikkurila-Otex with a solvent based primer to create a cut for any previous formulation. The soil needs to rest for about a week to allow the solvent to evaporate during this time. It is very important that the time interval between the application of the primer and, as a premature acrylic paint, pre-primed solvent surface preparation may cause yellowing of the paint.

The use of this solution may make the wood pattern less noticeable as the solvent compositions have higher coating properties. If possible, one coat of primer is sufficient. Impregnation is not needed - with the humidity in the bathroom, the paint itself can be processed. We also guarantee that the surface must be clean and dust-free.

Varieties

Paints are divided into such as oil and water based. Let's consider each variety in more detail:

At of this type material has the following subspecies:



Conclusion

Along with all the advantages, the Tikkurila color palette surprises with its diversity. Everyone can choose the material of their own free will. You can also add what is currently the most popular paint "Tikkurila" for wood, the price of which is relatively low and affordable for any consumer (from 200 to 5,000 rubles, depending on the type of product and the capacity of its container).

Can you paint a wooden lacquered ceiling in white - no sanding and then painted lacquered boards? Is benzine thinner a good idea? Due to the fact that the paint is best suited for the ceiling, we offer a 10 or 40 version. The key is the evaluation and preparation of the surface, which is often associated with a test.

The paint must be evaluated before it is done. If the varnish breaks and does not agree with the substrate, it should be sanded down to unfinished wood. The next step is to do a test painting, because we don't know how much the wood has been impregnated, and whether the top coat will not be yellow as a result of the previously used one. The description of the operation is the same as the repair of the old door.

Perhaps, wood is one of the most popular materials that a person uses in construction. Moreover, the experience of working with him is simply huge. For all the time, the tree has proven itself from the best side in many respects. Some wooden houses have survived to this day, despite the fact that their age reaches up to 200 years.

And the point is not only in the technology of creating baths, houses, utility rooms and other premises made of wood. The protection of these structures is also important. It's no secret that without proper protection, a tree will not last long. What exactly is such protection? It can be wood oil, wood impregnation, antiseptic or paint. They play an important role in the life of the tree and its external features.

There is also an alternative possibility - we can avoid grinding in a situation where the lacquer hole needs to be covered. We also recommend that you test on a less visible part of the ceiling. We encourage you to take a look at our other blog posts on furniture painting.

Send them to us through the bookmark and, of course, you will not go unanswered 🙂. If you want to use prices without searching for the base product, use the form on the Contact tab and provide information about the product name, quantity and color. Attention! Orders are made only through the shopping cart. Since the price of the paint is different from the base paint. Proforma invoice for coloring as other mail. In the case of a private collection, the paint is mixed at the receiving points in the presence of the receiver. With an online store with a low price.


Today, the Finnish company Tikkurila can be called the leader among manufacturers of paints and varnishes. For decades, the company has been manufacturing paints and varnishes, constantly improving their properties. In this article, we will look at Tikkurila products, find out the range of products for wood processing and their characteristics.

Mixer paints cannot be returned. Please consider and have a good shopping experience. They may differ from the actual colors of the pictures. The selection of colors is influenced by factors such as the finish and gloss of the material or lighting. Matt varnish for wood. Decorative and impregnating preparation for exterior wooden surfaces.

Actual performance depends on many factors such as texture, porosity and moisture content of the substrate. The product provides maximum resistance to atmospheric conditions: precipitation, humidity and temperature differences. The surface is resistant to microorganisms - does not crack or peel off. The wax content also improves scratch and abrasion resistance.

Tikkurila as a brand

Why do you think Tikkurila paints and varnishes for wood and other surfaces are so popular? Due to good advertising and brand promotion? Not at all. The point is many years of experience, product quality and the desire to do the best for our customers. You may be surprised, but Finnish products have been on the world market for 150 years. During this time, a huge number of paints, primers, antiseptics, varnishes and similar materials for the treatment of various kinds of surfaces have been produced and improved.

The product is thixotropic - it spreads easily, does not drip or stain. No need to apply a layer of underlay. More than 150 years of experience in the field of wood protection coatings with improved resistance to mold fungi protect wood from moisture, cracking and flaking increased resistance to scratches and abrasion due to the presence of micronized wax product for staining a wide range of attractive and durable colors, highlighting the beauty and structure of wood The product is thixotropic - does not stain, spreads easily, does not drip. High weather resistance due to exceptionally strong 3-resin coating Effective wood impregnation and moisture protection Excellent product compatibility with wood structure. It is possible to color the product, which is associated with a surcharge.


If we talk separately about Tikkurila products that can process wood, then they are divided into 3 types:

  • for universal use;
  • exclusively for outdoor work;
  • for outside work only.
  • It should be noted that in addition to the production of paints, the company is also engaged in the production of other materials:
  • Tikkurila wood putty.
  • Tikkurila primer for wood.
  • Antiseptic Tikkurila for wood.
  • Lucky Tikkurila for wood.


Covering protection with Vinha

The final shade will depend on the type of wood and the original color of the substrate. Innovative decorative and impregnating preparation for coloring wood from the outside. Product with thixotropic properties - spreads easily, does not drip, does not stain. After coating, the coating is resistant to microorganisms, protects the wood from moisture, does not crack or peel. The micronized wax content improved scratch and abrasion resistance. High quality color pigments provide uniform and long lasting color.

The company's approach to the treatment of wooden surfaces is more than balanced. It is not for nothing that specialists work in it, who, as no one knows, what kind of protection the material needs at certain temperature indicators, at different humidity and intensity of operation. And thanks to the wide range of Tikkurila products, the consumer is given the opportunity to choose the best option for himself.

This brings out the natural beauty and texture of the wood. Available in a wide range of attractive and durable colors. Before painting, all sharp edges must be rounded off. Thoroughly clean the surface with bark, bag, earth, oil, grease, mold, wax, fungus, pests or other contaminants that limit the adhesion of the applied coatings. Remove lime, cement or mortar residue, leave a stain on the wood and can also affect the durability of the applied coatings.

Nodes are removed or gone. Defects, cavities should be filled with wood inserts, damage, gaps filled with wood putty, with a shade slightly lighter than the desired color. To clean surfaces and remove mold, it is recommended to use the appropriate product. Previously painted, existing, glossy coatings and substrates must be carefully selected to ensure proper absorption of the drug into the substrate. If necessary, remove the existing coating. Protect plants from splashes during application.

But, theory and stories are one thing, but what consumers say is another matter. However, here everything is just fine. Feedback on materials for Tikkurila wood is positive. If you give an assessment on a 10 point system, then it will be 9.7. This already says a lot about the company and its products.

In the case of renovation of old paintwork, a trial painting is required. Mix thoroughly before use and during application. Apply with brush or sprayer. Apply over the entire surface along the fibers, paying attention Special attention on joints and cracks and using a thick layer on the ends of the wooden parts.

The indicated price is for clear varnish in a 2.7 liter container. The price refers to a colorless product! They may differ from the actual colors of the paintings as factors such as the finish and sheen of the material or lighting influence the choice of color.

Varieties of Tikkurila paints for interior woodwork

Let's start by looking at the colors for internal works, the range of which is quite large. The peculiarity of the compositions is that they are made of high-quality materials, are absolutely safe for people and have excellent performance. Standard containers in which paint is sold are cans of 0.9 liters, 2.7 liters, 9 liters. In this case, the maximum volume of the can reaches 18 liters.

Other available capacities: 9 and 0.9 liters. The materials provided by the company can be used both during work carried out in private homes and in in public places. Among the wide range of products are wall paints, enamels, lacquers and decorative items such as laser, pearl or structural paints.

Read more about the products of this company in our article. We want the product to have the highest performance and the interior to be safe and durable. Which of these features has Tikkurila paints? Possibility of applying the product on a roller or brush.


Here is a list of Tikkurila's most popular paints:



Note! In addition to products for domestic use, the company produces paints for industrial premises. This paint is Luminol 25 Paint, Novipur 30, Dikoplast.

If the wooden surface needs to be leveled or some defects corrected, then putty is indispensable here. To achieve the best effect, we recommend that you use both paint and putty from Tikkurila. For example, Spakkeli Puukitti wood putty will do the job perfectly.

Particularly noteworthy are latex paints, which are resistant to scrubbing, extremely effective and well hidden. The coating formed by this product is easy to clean. It is easy to apply and the resulting layer is extremely durable. Tikkurila is a topcoat developed in ceramic technology where a large mechanical coating plays a big role. Also interesting is the phenomenon of encapsulation, which increases the barrier properties of the painted surface. This is an important feature of painted school interiors, public buildings, laboratories, hospitals and factories, where the cleanliness of the walls is an important aspect in determining the interior.

Tikkurila paints for outdoor use

Everyone knows that the requirements for compositions for outdoor use are much higher, since there the paint will be exposed to the aggressive influence of the environment. In general, paints for outdoor use can be divided into groups:

  • oil;
  • on an alkyd basis;
  • water based.


What is ceramic coating technology? It is a unique system of ceramic and functional fillers where we can achieve a distinct color depth, anti-reflective, matte finish and mechanical stability. These products allow you to quickly clean the surface - most often - with a damp cloth.

These paints also have a non-threading formula, well grounded and easy to spread. It also reduces the drying time, which significantly reduces the refresh time. Thanks to such products, we can give the surface a beautiful finish, but above all, protect it from corrosion or biological degradation.

Tikkurila produces most of its products on an alkyd basis, adding effective components to it. Acrylic-based dispersions are fast-drying, environmentally friendly and very wear-resistant formulations. Accordingly, the price of products is quite high.

Products for household use

Acrylate-based Ultra Talomaali paint. It is resistant to rain, temperature extremes, high humidity and UV rays. Used for woodworking. The finished coating is semi-matte. For many years it has not lost its appearance. The consumption of the composition is 1 liter per 4-6 m 2 with a sawn tree, and 1 liter per 7-9 m 2 with a smoothly planed one. Needs to be diluted with water. A series of paints includes two more varieties: Ultra Classic and Mat. They differ in their degree of brilliance.

Outdoor products are recommended for protecting garden furniture, wooden decks, fences, balustrades, platforms. Here you can choose a finished product or use the so-called. mixer. Wooden surfaces must be covered with special tools. The descriptions indicate the purpose of production based on wood. For different surfaces products with certain properties are required.

Wooden facades and fences are painted with wooden facade paints which are elastic and weather resistant. Elasticity is a very important aspect. Wood expands if the temperature is higher, contracts if it is lower. This feature is especially relevant in Lithuania, where winters are cold and summers are warm. If the wood is painted without elastic paint, the layer will crack and the paint will start to cling. The more elastic the paint, the better they move with the wood. Being the first in Lithuania, we presented these ready-to-use paints, the most popular colors: cherry, chocolate, yellow, sand, green and other colors.


Facade azure Tikkurila Valtti Akvacolor. Mixture diluted with water, based on natural oil. It is used for processing of external surfaces. Being impregnated with this composition, the wooden surface is protected from external negative impact. She processes walls and fences made of wood. Can be applied with a brush or spray gun. Consumption - 1 liter per 4-12 m 2 (the indicator depends on the smoothness of the surface).

This solution is more convenient because you don't have to wait until the paint consultant mixes the paint and it's cheaper because the paint is cheaper at the factory. To protect and maintain the durability of the terraces, they are coated with friction and weather resistant oils. These oils soak into the wood, protect against moisture, dirt, rot, temperature changes and make decks easier to clean. After processing, the surface becomes smooth and pleasant to the touch.

The oil is only suitable for outdoor furniture, and we recommend using water-based enamel paints for doors and window frames. Outdoor furniture, doors, window frames are usually suitable for wood enamel paints and oils. True, remember that the opposite - the use of enamel paints for terraces - will not. The main thing is that the painted wood is dry. Water-based film is more flexible than other products, it emits almost no volatile materials, and children can work with their parents.


Facade azure Valtti Color. It is also made on an oil basis and has similar performance as the azure above. Only here is its advantage that the composition can be tinted in more than 40 shades. Azure paint any external surface. Composition consumption - 1 liter per 4-12 m 2.


Teho oil paint based on alkyd. It can be tinted in different shades. Ideal for coloring wooden facade and other external planes. Apply with a brush. The composition dries in 24 hours, and the consumption is 6-11 m 2 /l. It can be diluted with Valtti primer, white spirit or alkyd thinner. There is another type of Teho Ikkunamaali paint, which is designed to paint the frame of doors or windows. Sold in two versions: A and C. The difference is that the first option is used without tinting, and the second is only tinted.


As you can see, you have a ton of product options that you can use for wood. And if you only need to protect the surface, then use antiseptics, varnishes and primers from Tikkurila.

Advantages of Tikkurilla paints

Among all competitors, the company has the name of the queen of colors. And it's not in vain. For all the years of production, errors have been corrected, new technologies have been introduced and product quality has been brought to the ideal. Millions of liters of paints and varnishes have been created for metal, wood, concrete and other surfaces. All this speaks of quality. But I would like to point out some positive points that Tikkurila products have:



All these positive aspects make the product ideal for the average user. That is why so many people love to use these particular formulations.


Conclusion

Tikkurila wood paint is a great choice. If you need to protect your wood products or surfaces to extend their life, transform, enhance texture or simply remove defects, then Tikkurila compounds are just right for this purpose. And although the price of the goods is not the cheapest, but you know exactly what you are paying that kind of money for. After all, a miser, as they say, pays twice. Don't be one and buy quality paints like Tikkurila.