Textured paint according to experts in interior decoration is an excellent choice for quality and price. It is a special material resembling a homogeneous viscous mass white color. If acrylic is introduced into the composition of such a paint as a binder, the resistance of the textured paint to changes in humidity and mechanical deformations is significantly increased.
To give variety to the smooth walls of the environment, textures have emerged that become quite present in the works. The presence of texture can serve to correct faults or irregularities in the walls, and textures are usually applied to already painted walls rather than white ones. The texture is an ink-like finish, but thicker and more viscous, the property with which particles of a substance adhere to each other. This viscosity is due to the hard components of the material, in general mineral crystals and quartz.
How to apply decorative wall paint: video review of technology and recommendations
Once the texture has been applied, drawings can be made, creating an art form on the wall. Apply textures to walls. Since there are three types of textures and different crystal sizes, the finish can vary greatly. It can be applied to internal and external concrete walls, brickwork, running mass and acrylic.
Adding a variety of colors to the composition leads to the desired colors, makes it possible to obtain the desired shades.
Advice ! You can order a specific shade from manufacturers facade paint receiving quality assurance.
Textured paint can be used to decorate any surface, even with minor defects, their depth should not exceed 2 mm. Depending on the method of applying the paint, it is possible to restore the aesthetic appearance of the surface. This paint has a dense texture, which is why it can be used to get rid of defects.
In addition to a special touch, it protects the surface of the wall and it is still possible to apply it without the labor of a professional, but of course as proper materials for execution - can be purchased in stores building materials, paints or branches. There are several shapes and textures that do not require such practice, but rather patience and creativity. Remember to apply too many textures, because they leave not only the walls, but also the "unbalanced" environment, that is, without linearity.
The texture application has fast drying, coating and exit. It is also easy to clean, which happens with a neutral detergent and an aqueous solution. It is mildew and alkali resistant. Despite the taste and imagination of each, some clues to the types of textures.
The main advantages of textured materials
This coating in terms of practicality is ahead of the wallpaper and Wall panels. Textured paint is not afraid of high humidity, mold. Care of the finished coating can be carried out with a soap solution. The paint can be applied to any type of surface, including brick, concrete, wood. In addition to acrylic components in textured mixtures, there are also special mineral additives - emulsions.
Applying textures to walls
In addition to physical wall textures, there are textures that are obtained through painting effects. good example of this is marmorato, a particular type of painting that leaves the wall with a marble effect. To make textures on the walls you need: a tray, a spatula, a foam roll, a hard texture roller, paints and textures of the same color, a tape holder and a steel spatula. Styrofoam is used to cover the wall with latex paint in one layer in advance. Once it dries, apply the texture.
On a spatula, place two spatulas of textured mass and spread them horizontally and vertically until the entire wall is covered. To form the circles, support the roller on the wall and rotate, but make them irregular so that the defects are not visible - the more precise the design, the easier it is to visualize the defects.
The main advantages of textured compositions:
- resistance to the negative effects of ultraviolet radiation;
- excellent decorative properties;
- good vapor permeability
It should also be mentioned that this decorative coating does not absorb foreign odors, does not contain harmful substances, and easily withstands temperature changes.
Decorative plaster with architectural concrete effect
Flexible thin coat resistant to scratches and weather damage Unique ready to use body dyed component available in three shades of grey, easy to apply a wide range of textures and applications available for indoor and outdoor use. The plaster can also be used on concrete substrates, on traditional plasters, on gypsum substrates and on agglomerated boards, gypsum boards, etc.
Advantages of interior paints for walls and ceilings
Various application and surface treatment technologies can create the effect of unfinished architectural concrete in various shapes, for example. formwork, combs, corrosion, etc. Plastic containers 20 kg. Special attention must be given to proper preparation of the substrate.
The variety of technical properties of these paints indicates that they are ideal for facade work, interior decoration premises.
Application methods
The use of facade mixtures in modern design gives you a chance to show all your imagination, create indoors unique option interior. Texture paints make it possible to imitate natural marble, fabric, floral ornaments. To implement the plan, you need to master the technology of applying a textured composition, use special tools and materials.
Degraded and damaged substrates will be smoothed and repaired prior to product application. Dust, low-strength layers, as well as elastic plasters, lime or adhesive paints must be completely removed. Moisture pressure in the substrate can damage decorative plaster; therefore, in areas subject to constant moisture penetration, ensure that the proper sealing layer and waterproofing have been correctly applied.
Once opened, the contents of the package will mix well with a spatula. The base coat can be applied with a stainless steel layer and textured with a stainless steel trowel with rounded corners. The thickness of the layers will not exceed 2 mm each, depending on the desired end result. The range of methods and textures depends on the desired end effect and application experience. Textured layered and surface embellishments should be applied with a spatula using short, irregular strokes: circular, horizontal, or diagonal.
The relief surface of the wall can be made using sawdust as a filler. To create a smooth texture, ordinary water is required.
Sharp edges can be obtained using quartz sand as a filler.
For full-fledged work with textured paints, you will need certain tools:
For finishing, it is recommended to use a high quality, low carbon stainless steel spatula. The best effects are obtained using the so-called gloss plaster. Applying the final texture to the surface can be done by burning the decorative mixture firmly and often over selected areas with a spatula, holding the slab at a slight angle to the surface. To get, for example, a "shooting" effect with dark tints, you can use a regular carbon steel grinder.
- putty knife;
- brushes;
- natural sponge;
- rollers of various sizes and shapes
Using a brush, after the material hardens, you can make fancy pictures on the wall.
Attention ! When creating a uniform wall structure, it must first be applied horizontal stripes, then vertical. When choosing a roller, keep in mind that you will need several rollers at once, differing in width.
When the material is always wet and flexible during application, a uniform smooth surface with pores will be obtained. Additional decorative effects, such as bolt heads, printed beams, joints between formwork panels and other products, can be created while the mix is still fresh and can be achieved on plaster using simple tools or materials such as elbows with iron pipes or steel, air bubbles or shavings, various types of leather or film rollers, brush or brush.
The paint base is applied with a wide roller, performing vertical movements. To eliminate inaccuracies, work in hard-to-reach places, use a small roller.
If you wind a rope around the roller, the up and down movements can imitate the stems of plants on the wall. If desired, you can purchase special rollers on which a certain pattern is applied. A spatula will help you make unusual stains on the wall. For paint that contains a coarse filler, a coarse spatula is suitable. Use a soft spatula to create delicate textures. To obtain unique patterns, you can use ready-made stencils. A two-color pattern on the wall can be done using the following method:
Fresh tools and stains should be rinsed with water and cured plaster removed mechanically. Suggested surface finishing methods. Structure with waves, burnt. Then, on a new layer, the wavy texture will be done using a flat trowel and applying vertical motions.
Corrugated texture, stitched with a brush, burnt. Then, on a still fresh layer, a loose texture will be created, referring to horizontal movements using a hard brush, after which the resulting folds will be smooth using a wide brush. The burning effect will be achieved with a dry chute or a flat surface.
- Apply base paint to the wall. Until it is completely frozen, make horizontal stripes with a sharp object.
- Apply a solution of the second color, armed with a stencil.
As a result, you will get a drawing, the effect of which will be added by a relief surface.
If you arm yourself with masking tape, you can make a fancy geometric pattern on the wall. The tape must be glued to the wall, making a certain geometric pattern. Next, a textured paint of a different color is applied to the wall. After drying, the tape is removed, enjoy the result.
Regular structure, rolled up, incinerated. The first layer of base, approximately 2.0 mm thick, should be applied as a smooth surface with a smooth metal trowel or plastering trowel. Then, on a still fresh layer, the texture will be made using a roll of leather.
Application will be carried out with a plastering trowel to a thickness that allows simultaneous firing. Irregular structure, modeled with a roller, in two colors, burned. Structure formwork and ridges in concrete, burnt. Then, on a still fresh layer, a pattern of formwork and beech will be made. For example, to make vertical and horizontal formwork marks, a long trowel will be used, and scratches can be made with a rounded handle, screw reflections can be obtained using a thick tube or a hydraulic steel elbow.
If you run a comb with large teeth along a wall painted with two colors, you can unusually “comb” the wall.
Advice ! To achieve the desired effect, do not wait for the top coat to dry completely.
How to prepare the walls
Full-fledged painting with textured paint walls involves their preliminary preparation. You need to get rid of the old coating, remove dust and dirt from the walls. In the presence of cracks, cracks, they are puttied. Next, a layer of finishing primer is applied to the wall. It is needed to ensure high-quality adhesion of the material to the base of the wall. The primer should eliminate all the irregularities on the surface, it will give the patterns expressiveness and originality.
The comb will be made using a wide brush, a natural sponge, a cracked object or paper, or any other tool that can shape the combs. The material will not be applied in windy conditions as this may cause it to dry too quickly during application.
Textured wall paint as a finishing material
AT different conditions material may harden faster or slower. The product must not be mixed with other plasters, paints, resins or other binders. The application room should be adequately ventilated during and after application until the odor has disappeared. In case of contact with eyes, rinse with plenty of water and seek medical advice. Do not leave the product out of the reach of children.
Moisten the wall with a damp cloth, apply a thin layer of primer on it. After 4-24 hours (drying time of the primer), you can perform a decorative wall finish. Working with textured paints is different from applying conventional paints to the surface. First, the paint is heated to 20 degrees, in the case of a thick consistency, water is added to it. Time of full drying of paint - 24 hours.
It must be protected from adverse weather conditions until completely dry. The use of protective scaffolding is recommended. Because mortars can cause material change, surfaces must be coated with materials from the same batch number printed on each container.
How to prepare the walls
An opened container should be carefully closed and its contents should be used as soon as possible. The safety data sheet establishes the area of use of the material and the recommended method of work. However, it cannot replace the contractor's professional experience. In addition to the guidelines provided in this document, work must be carried out in accordance with building standards and health and safety regulations.
Varieties of textured wall paints
With the help of such coatings, the following surface options can be obtained:
- Misuri. Acrylic starch is added to the mixture.
- Relief. Sawdust or crumbs are introduced into the mixture as fillers.
- Marseille wax. You will get a wonderful imitation of old stone, bark. To consolidate the result, an additional glazing paint is applied to the wall.
Common manufacturers of textured paints
amour color. With the help of such compositions, you can make a unique interior. Materials have high wear resistance, excellent quality. Manufacturers offer three product options: Perlata, Tactite, Escenta.
Perlata is based on water and is considered an environmentally friendly material. The paint includes pigments that are similar to pearls, adding an element of luxury to the interior.
Escenta is full of undertones that captivate the eye.
Tactite is unique in that it gives the surface a resemblance to a marble mosaic.
Paritet Decor. The company specializes in the manufacture of fakurnyh materials High Quality. The range of products offered is wide, we will present you some paint options:
Matiere imitates natural wood, expensive fabric. Such compositions are suitable for any environment, introducing an element of luxury into it.
Marrakech combines ancient technique and modern materials, brings harmony and peace to the room. This decorative coating fits perfectly into the Moroccan style, reminiscent of the interiors from the book "A Thousand and One Nights".
Les Perles presents blends that contain a special pigment - mother of pearl. Purity, elegance, color transitions suggest waves, clouds.
Craquelee is an antique canvas finish. This mixture can be used to decorate walls in the old style.
Painting the walls in the bathroom
To update the bathroom, textured vgt paint is suitable. First you need to make sure that the wall is not subjected to vibration, check its strength. Further, dust, dirt are removed from the walls, all flaws are eliminated with the help of puttying.
We propose to act according to the following algorithm:
- If the composition is applied with a spatula, then its size should not exceed 15 cm. The best option would be asymmetrical application of strokes.
- Using a stencil is appropriate when creating three-dimensional images. It will take 2-3 hours for each new layer to dry.
popular in recent times, a beautiful and affordable way of decor - textured paint.
In terms of composition, this is a coarsely dispersed mass, which includes acrylic and various mineral additives - scaly, drop-shaped, etc. Due to additives, the treated surface is textured. The paint is applied with a spatula, roller, brush, using a pneumatic sprayer. Depending on the source material and the method of staining, the final appearance of the surface and the consumption of paint differ.
The advantages of the method include:
- surface treatment speed;
- a variety of final decor options;
- Using textured paint, it is easy to mask minor wall defects.
There are also disadvantages: consumption (up to 30% more than conventional paint coating). If you want to change the decor, you will have to completely clean off the previous paint, otherwise you will not be able to achieve a beautiful textured layer.
Applying textured paint
It is better to put the first layer with a spatula, but it is better to use it if the paint is very thick and embossed, and the filler is rough. The final texture of the surface will depend on whether the trowel is hard or soft. You need to apply paint in single strokes, it is better to determine the directions in advance. You can create interesting relief options.
If you are going paint with a brush, it is better to take a wide one. The surface must be prepared (cleaned, plastered, primed). Apply paint in wide strokes - first in a horizontal, then in a vertical direction (or vice versa). You can draw patterns with a brush.
For roller painting it is desirable to acquire three rollers for textured paint at once: two are identical, one is smaller. The paint is applied with vertical movements with a large roller, irregularities are corrected with a small one. Excess paint (excess layer) is removed with a clean roller.
You can buy paint directly from the sprayer. Before applying it to the wall, it is better to test it on a small surface, so you will find out which layer to spray and in which direction it is better to do it.
Tip: there is an option to apply paint in another, not quite traditional way - with a sponge. The depth of the relief, its texture will depend on how granular the sponge you have chosen. You can "draw" with a sponge using a stencil.
Finally, you can prepare textured paint with your own hands. To do this, you buy regular acrylic in the color you need and mix it with filler. The filler is also sold - for example, granite crystals, sifted sand, etc.
Options - combined surface: a combination of ordinary paint with separate textured inserts. Or a combination of textured areas painted in various ways - for example, the main surface is sprayed, and individual fragments are painted with a sponge on a stencil or brush.
