Minimum garage door width. Lifting garage doors: dimensions, prices and features

The recommendations of our specialists will help you choose the optimal standard fences in Moscow.

Automated devices that lift the sash must have a working potential of at least 10 thousand cycles. And if intensive operation is planned, it is worth choosing equipment designed for 20-25 thousand cycles.

• It is convenient to use shutters with a built-in gate and windows. The door allows you to reduce the load on the main sash and extend its life, and an insert made of impact-resistant glass provides natural light.
• The thickness of sandwich panels used for household products must be at least 35 mm. The most reliable are sashes with a thickness of 45 mm, but the purchase of such structures will not be cheap. However, their strength and heat-saving characteristics will be much higher.

When dimensions are chosen, the price of the structure will certainly matter. Our company is ready to offer you products with different dimensions and for any budget.

erection country house usually accompanied by the construction of a garage. One of its most significant parts is the gate.

When developing a project, it is important to take into account all the nuances. Insufficient dimensions or an incorrectly selected type of gate in the future will necessarily affect the operation of the entire structure.

Therefore, a detailed plan and project are being developed.

Separately, it is worth talking about the width of the gate, in particular the standard one. Is it possible to order standard gates, and what are the actual standards?

The concept of a standard

First of all, it should be noted that there are no generally accepted and widely used standard values ​​\u200b\u200bfor determining sizes, in particular width.

They simply cannot be established at the state level due to the existence of so many factors.

Therefore, it makes sense to consider the standard dimensions of the gate only in relation to these factors.

Optimal width and other dimensions

When the question arises, what should be the width of the gate in the garage, they often talk about the concept of optimal dimensions. Of course, what car the garage will be used for is of paramount importance.

For example, the transverse dimensions of the "seven" Zhiguli are only 1 m and 62 cm, while the Audi S6 model is 24 cm larger.

This difference seems small, especially for experienced drivers. But if you measure an ordinary Gazelle, then it is already half a meter wider than the same Zhiguli.

Another important point in determining the width of the gate, which will be optimal, this is its binding to the height. This factor appears in all manufacturers of any type of gate mechanisms.

With a minimum width value, it is unlikely that the manufacturer will undertake to make very high gates.

Standard in defining minimum and maximum

More specifically, we can only talk about the minimum and maximum sizes. They are also negotiated for different types of gates, but have similar meanings even for different manufacturers.

roller shutters

Dimensions start at L 750*B 750 mm, where L is the width and B is the height. However, making such opening dimensions in the garage does not make any sense.

To plan the size of the gate, you need to take the dimensions of the car as a basis. Let the average size be 1.8 m.

On each side, for ease of entry, you need to add about 30-40 cm. It turns out 2.4 m. This is the average width. At the same time, the height for passenger cars will be about 2.2–2.5 m.

The maximum dimensions of rolling gates reach 11x8 m. Their minus is a rather high cost, since due to the increase in linear dimensions, the entire structure becomes significantly heavier and, accordingly, the lifting mechanisms are strengthened.

Sliding gates

They belong to the hangar type. Now it is precisely such structures that can reach the largest dimensions - 40x20 m.

For private garages, such large structures are not needed. Their minimum standard dimensions are 3 m in width and 1.9 m in height. The step of changing the standard dimensions is 0.5 m and 0.2 m, respectively.

swing gate

Although they do not require space to roll back, their standard dimensions do not differ significantly from rollback ones. As in the previous case, the minimum standard (optimal) dimensions are 3 m by 1.9 m or 2 m.

Standard dimensions for sectional garage doors

If a decision is made to install sectional doors, the second point is the question of the manufacturer. In this case, it is of great importance for the definition of the standard.

At the same time, the concept of "dimensional step" is introduced. It varies greatly among all manufacturers. It seems that 15-20 cm do not mean anything, but this directly affects the final cost of the product.

Despite the fact that for guides the distance will be almost the same for everyone, other indicators may differ..

From well-known manufacturers, let's take, for example, Alutech and DoorHan. They do not match the requirements for the dimensions of the lintel.

Different requirements for the size of the opening are also imposed depending on the use of the types of spring mechanisms - torsion and tension.

Consider separately some of the most famous manufacturers.

doorhan

The most commonly sold and declared as standard doors are those with widths of 2500, 2750 and 3000 mm. In this case, the height starts from 2100 mm.

This manufacturer offers a 100mm dimensional step, so there is a bit more choice here.

Hormann

Standard sizes start from 2250 by 1875 mm, and end with parameters of 6000 by 3000 mm. The step in changing the dimensions is 125 mm. The most frequently supplied options are only three in height - these are 2000, 2125, 2250 mm, and four in width - 2375, 2500, 2750, 3000 mm.

However, here it is also necessary to take into account that different types of guides can be used in the design. They imply the possibility of increasing the size only up to a certain limit each.

RYTERNA

The manufacturer introduces several standard sizes.

For two widths - 2500 and 3000 mm - there is a choice of three different heights - 2150, 2260, 2370. That is, in this case, the height change step is 110 mm.

Alutech

This manufacturer represents the greatest variety of serial gates. The step of changing indicators for linear dimensions is 125 mm.

The width starts with a common number for almost all - 2250 mm. But at the same time, the height has an initial value of 2085 mm.

Let's try to apply this data to a specific car, for example, the previously mentioned Audi S6.

The required height is determined simply - you need to add about half a meter to the dimensions of the machine itself, maybe a little more. We get about 2.2 m.

Looking at the offers of different manufacturers, we get the following picture - it is possible to make gates with a height of 2150, 2210, 2250 and 2260 mm.

Now let's calculate the width. It is necessary to add 80 cm to 1.82 m (40 on each side). In total, we get 2.62 m.

Alutech has one of the standard sizes of 2625 mm, DoorHan has two options - 2600 and 2700. Here you need to think carefully, since at first glance such an insignificant difference can significantly affect the cost of the gate.

The manufacturer Hormann also produces quite interesting options. The dimension step, like that of Alutech, is 125 mm, but there are only a few sizes that are considered streaming (or standard). Therefore, you have to choose - to slightly narrow the size (2500 mm) or, conversely, increase it (2750 mm).

A strong increase in the dimensioning of sectional doors is not justified. This entails not only large financial investments at the stage of buying a gate, but also more significant costs for heating the garage.

Standard dimensions for automatic garage doors

Standards for the dimensions of automatic gates may differ from those that have only manual control. This is directly related to the fact that automatic in almost all cases require additional space for installing the opening mechanism.

All types of gates on the market can be equipped with automation.

roller shutters with automatic drive require almost no additional space both in the garage and outside. Their design is similar to roller shutters.

The web consists of lamellas, which, with the help of a drive, will be wound onto a drum equipped with a protective box.

Their standard sizes do not differ at all from manual ones. This is due to the peculiarities of the installation: installation is possible even in the opening, not to mention the installation outside and inside.

lifting can also be automatic. But they are less and less common due to some inconvenience of the design.

Sectional automatic gates may have slightly larger standard dimensions compared to the same type, but with a mechanical or manual opening principle.

Although they are the most common, there are some nuances in determining the dimensions for installation in a specific opening.

The fact is that such gates require additional space not only on top for the lintel, but also on the sides in order to install guides along which the canvas will move.

If the opening corresponds to the standard dimensions of one of the manufacturers, then the internal dimensions of the garage may not be suitable.

Therefore, when choosing this type, it is imperative to consult with a specialist who will help you choose for a particular garage. optimal dimensions from the available standard.

What is the standard size garage doors Reviewed by on Sep 29 . The construction of a country house is usually accompanied by the construction of a garage. One of its most significant parts is the gate. When developing a project, it is important to consider Rating: 0

Especially for customers who want to save a lot on costs and who have the opportunity to install garage overhead doors on their own, a range of standard door sizes with tension springs is provided. Savings are achieved not only This is only due to mass standard production and a warehouse program, but also due to a reduction in the cost of paying for the work of a professional installation team.

The basic equipment of lightweight garage doors includes: a system of tension springs with a double cable, i.e. if one cable breaks, the second one will prevent the door leaf from falling or jamming; rail kit - vertical and horizontal rails with a special bend design, facilitating precise assembly on site; door leaf made of sandwich panels with top, side and bottom supports for easy installation and adjustment; handle; valve; documentation package; packaging for transportation.

Options for such gates can only be accessories that can be installed on the gate during installation or later: a lock for locking from the street; additional external sealing circuit; Ceiling electric drive with controls and security systems. Since standard sets are made for sale from a warehouse, bypassing the individual order cycle, windows and gates are not cut into them. Such gates are shipped as quickly as possible - if the desired size is in stock, then you can get the desired kit immediately after payment.

The main limitations of this offer are not a large selection of standard sizes of sectional overhead doors, colors and textures of panels. If the opening is slightly lower or narrower than the standard opening, the door leaf can be cut off during installation. The grid of opening sizes of standard door sets consists of 13 sizes:

As for the outer surface of the panels, there are four options to choose from: a panel with a central stripe of white, Brown color or golden oak;

board panel in white, brown or golden oak

panel "wave" white or brown

and panel in brown or golden oak color

All other requirements for the opening and installation of these doors are similar to any other overhead sectional doors with tension springs, including a 100mm lintel.

The main feature of this offer is the regularly maintained availability of kits in stock, i.e. the purchase cycle of these gates can fit in one or two days, including the process of payment and shipment from the production warehouse.

Our employees are ready to consult for you - by phone, by e-mail or during your visit to the office, and help to understand the variety of gate modifications and make the one that is unique right choice! Happy shopping!

The Garage company offers to buy lifting garage doors in Moscow of any size at prices from the manufacturer! Order a free measurer call and we will install a garage door in 1 day!Today we are official dealers famous brands Alutech, Hormann and DoorHan, which are known throughout Western Europe. Our products and installation work have earned the highest marks from the most demanding customers.

We are the official dealer of gate manufacturers:

A wide range of sizes, the possibility of painting in any color of the RAL palette, guarantees and after-sales service - this is not a complete list of the advantages of our offer. If your garage opening has standard dimensions, we will supply ready-made kits from our warehouse. If necessary, gates are made to order in non-standard sizes, including gate systems for garages for two cars.

Benefits of overhead garage doors:

• one movement of the hand - and the lifting garage doors themselves will smoothly open the entrance opening;
• this solution leaves a completely free space in front of the garage - the movement of the door panels along the guides in the form of an arc ensures optimal compactness of the entire system;
• you do not have to worry about the penetration of intruders - all gate models are made in anti-burglary design;
• in the production process, "sandwich" technology is used, in which the space between two galvanized sheets is filled with polyurethane foam, providing the highest standards of heat and sound insulation of the interior;
• each gate system includes in its design safety circuits that protect the user from injury in case of accidental failure of load-bearing and other elements;
• the possibility of equipping the gate with automatic control units opens up prospects for a fundamentally new level of user comfort;
• impressive durability of garage overhead doors is ensured by the moisture resistance of the materials used, reinforced by the factory powder coating external surfaces;
• attractive external aesthetics is provided by a wide choice of fabric textures, as well as the possibility of high-quality painting in any color from the international RAL palette

Useful information:

We do not just offer you inexpensive garage overhead doors – our company develops and implements individual solutions for each garage, supplying and installing well-chosen gate systems. The exact calculation of the cost is carried out according to fixed prices. All products and installation work are warranted.

Lifting garage doors from the manufacturer - a full range of services, from measurements to test trials!

Size doesn't matter!

• owners of garage doors of standard sizes with a width of about 3, 4, 5 or 6 meters are offered ready-made kits, which are always available in our warehouse;
• if the width of your gate does not fit into the standard dimensions, our experts will skillfully adjust the gate system to the entrance opening or finalize the design in our workshop;
• if necessary, you will be offered the completion of standard gates for garages for two cars;
• the standard width and length are: 2.5 by 2.5, 2.5 by 3.0, 3 by 2.5, 3 by 3, 4 by 2, 4 by 2.5, 4 by 4, 4.5 by 4.5, 5 by 5.

Garage doors from the manufacturer - exemplary products of individual and standard sizes at an attractive price!

Automation is a convenient solution in all respects!

Automatic garage doors today are rightfully considered a symbol modern home for a car, which determines the maximum comfort of using door systems. Installing a small electronic unit associated with an electric drive, remote control and sensors will allow you to appreciate the unconditional convenience of such a design in practice.

Advantages of automatic gates:

• the ability to open / close the garage, both from the car and from home;
• trouble-free automatic equipment from the leaders of the European market -
• Came and Nice companies;
• effective security control

Automatic garage doors from the manufacturer - treat yourself to a new level of comfort!

Panel options – wide range of options

Our production covers all possible variations of garage door profiles, namely:

• S (C) corrugation;
• M (M) corrugation;
• L (L) corrugation;
• microwave;
• panel

At the request of the customer, finishing processing of external surfaces is carried out in any color of the international RAL palette, as well as imitation of the colors of natural wood. Creating harmony of garage doors with the overall design is our corporate identity!

Additional options - a significant plus to the basic advantages

To increase the convenience of using garage doors, our company offers you the following product options with additional equipment:

• garage doors with a door (built-in or adjacent);
• gate with a window;
• gate systems with ventilation grilles, internal deadbolt or deadbolt lock.

The presence of these elements allows you to save heat and electricity, increasing the overall service life of the garage door.

Installation, repair and maintenance - all in one company!

Our company produces various types of garage doors with delivery and professional installation. By entrusting the installation to the manufacturer, you concentrate all responsibility for the quality of the product itself and installation on one person. At the same time, we offer repair and maintenance of installed garage doors, both within the framework of warranty obligations and in the post-warranty period.

Exemplary garage doors with installation from the manufacturer - do not miss your chance for a really profitable and useful purchase!

You just have to call!

… or apply online on our website. After that, our specialist will contact you and agree on the arrival of the measurer at a convenient time for you. You will discuss all the important details of the future order with the arrived master, after which an estimate will be drawn up and an order for the manufacture and installation of garage doors will be signed.

Reference garage doors of any type - with a manufacturer's guarantee!

We bring to your attention a unique promotion for sectional doors of standard sizes (electric drive on request). All gates are already ready - you can pick them up today (or order delivery)!

Do not miss this great opportunity to make your garage warm, modern and comfortable with automatic gates or.

Best price guarantee! If you find items at a lower price, we will make a better offer or give you the same price. You just need to provide information about an alternative offer.

Basic equipment

• Cloth made of steel sandwich panels 40 mm thick and reinforced for hinges
• Rise low
• Interior side of the panel: texture "stucco with horizontal stripe RAL9003
• Galvanized tension/compression springs (number of spring cycles 25000)
• Lightweight handle
• Gate valve EF
• Branded packaging in corrugated cardboard and stretch film
• standard color for outside: RAL9003 White, RAL8014 Brown and GOLDEN OAK
• Structure for the outside: wood with a wide center. stripe
• Universal fixing kit for ceiling mounting with headroom up to 234 mm

Price list for standard sizes of the RSD01SC series

Price subject to pickup and self installation products.

In stock at the factory! Ready-made sets of standard sizes are ready for shipment in the shortest possible time.