Acrylic facade paint vd ak 1180

Paint for exterior and internal works VD-AK-1180 is a water-dispersion, acrylic polymer with the addition of titanium dioxide and other substances. It has an oily, thick texture. Ready for use.

Paint VD-AK-1180 is intended for high-quality painting of facade and interior surfaces of buildings and structures. It has excellent adhesion to concrete, cement, brick, plasterboard, wooden substrates.

Hides minor surface imperfections.

1. Paint for exterior and interior works VD-AK-1180

To perform external (facades protected from direct water ingress) and internal protective and decorative works on plasterboard, brick, concrete, plastered and wooden (except floors) surfaces. Possesses high water resistance and resistance to influence of the atmospheric phenomena. Tinted to desired shade. Drying time - no more than 1 hour at a temperature of + 20°C. Packing - euro-bucket.

2. Facade paint VD-AK-1180

To perform external and internal (in damp rooms) protective and decorative works on plasterboard, brick, concrete, plastered and wooden (except floors) surfaces. Possesses high resistance to the increased humidity. Tinted to desired shade. Drying time is not more than 1 hour at a temperature of + 20 °C. Packing - euro-bucket.

3. Washable paint "Profi" VD-AK-1180

To perform high-quality and durable exterior and interior (in wet areas) protective and decorative work on plasterboard, brick, concrete, plastered and wooden (except floors) surfaces. Resistant to atmospheric precipitation and UV rays, does not interfere with gas exchange, which helps to remove moisture from inner layers walls. It is resistant to abrasion and washing. Tinted to desired shade. Drying time - no more than 1 hour at a temperature of + 20 °C. Packed in euro-bucket.

4. Facade winter paint VD-AK-1180

For facade work on concrete, brick and plastered surfaces at temperatures up to -10°C. It is not recommended to carry out painting at icing of a surface and the increased humidity. Possesses the increased resistance to adverse influence of environment. Has good hiding power. It is tinted to the required shade, packaged in an euro-bucket.

5. Tinting paint for exterior and interior work VD-AK-1180

For tinting white paints VD-AK-1180 or as self material for exterior and interior work on concrete, brick, wood (except for floors), plasterboard and plastered surfaces.

6. Washable interior paint "Profi" VD-AK-1180

To perform high quality internal finishing works on concrete, brick or plastered surfaces, for interior woodworking, as well as for painting various types of wallpaper. Tinted to desired shade.

Possesses the increased water resistance and covering ability. Resistant to abrasion and washing. Forms a "breathable coating", dries quickly. Drying time - no more than 1 hour at a temperature of + 20 °C. Packing euro-bucket.

Surface preparation for painting

Thoroughly clean the surface to be painted from old coatings. If necessary, wash with soapy water and ammonia and allow to dry. Clean porous and loose (plaster, gypsum, etc.) surfaces to a hard layer, treat with a strengthening primer and level with putty.

Application features

Mix the paint thoroughly, if necessary, can be diluted with a small amount of water (up to 5%). Apply to the surface with a roller, brush or spray gun. To obtain a smooth surface, apply a second coat with a drying time of at least an hour. If necessary, the paint is tinted with pigment pastes or tinting paints. After finishing work, thoroughly wash tools and hands with water. When the paint is completely dry, you can apply a solvent or turpentine.

Facade winter paint VD-AK-1180 is used for facade and interior work at temperatures up to -10°C in dry, sunny weather.

Drying time 24 hours, at low temperatures the drying time increases up to 48 hours.

Shelf life in tightly closed packaging at a temperature of 0°С to +30°С is 12 months from the date of manufacture. The service life of the coating is up to 10 years.

Specifications

Water-based paints are usually used for indoor work. They create a layer that allows air to pass through. It helps to maintain a comfortable microclimate in the room. Water-based paint "VEAK 1180" is a unique material that is used in the decoration of walls, ceilings, facades. Such a composition is completely safe, and its application will not cause difficulties even for a beginner.

Advantages of VEAK 1180 paint

Finishing material of this type is distinguished by many positive aspects:

• Good adhesion to the surface;
• economical consumption;
• Lack of chemical smell and toxicity;
• Durability;
• Explosion and fire safety;
• Excellent washability of the material from the working tool.

Thanks to all these advantages, the price of VEAK 1180 is much higher than that of other water-based paints.

Specifications "VEAK 1180"

This acrylic-based emulsion is produced in accordance with GOST specifically for work on brick and concrete surfaces, metal. Concrete and brick can be plastered or not, but the metal must be primed. The standard color of the paint is white, but with the help of color you can achieve any shade.

Material consumption per 1 sq. meter is a little - 150 grams. Usually water-based paint is applied in several layers. An hour after drying one layer, you can apply a second one.

Other technical characteristics are presented in the table:

If the paint was stored in a room with sub-zero temperatures in winter, it could freeze. After defrosting, all properties of the VEAK 1180 water emulsion are preserved. If the consistency is thick, then you can dilute it with cold clean water.

The VEAK 1180 coating has a long service life, which is up to 6 years. It is very convenient and simple to paint with such material, the layer lays down neatly, without the formation of smudges and bubbles.

Since the paint has sufficient adhesion and viscosity, no transitions are visible on the coating. If one part of the wall is framed, and the second is processed later, the joint between the layers will not be visible, it will be equal to the base layer.

The default paint is white, but that shouldn't stop those looking to paint in a different shade. Kohler can turn the snow-white emulsion into the desired color.

The composition of "VEAK 1180" and application

The composition of the paint includes substances such as:

• Acrylic type dispersion - 50% of the total volume;
• White pigment obtained by adding chemicals in combination with a filler (calcite, mica, chalk, talc) - 37%;
• Plasticizers for high elasticity, which are lignosulfonate or dibutyl phthalate - 7%;
• Additives that improve the quality of the final product - defoamers, anti-corrosion agents, preservatives - 6%.

KMF glue is used as a thickener, sometimes this role is played by latex. Thanks to such additives, the coating with this material is able to hide small cracks that can not be puttied in advance.

This paint can be applied to any surface. According to GOST, 150 ml / sq. m. In order to make the consumption even smaller, you need to clean and prime the surface in advance.

You can apply paint to the surface with a brush, roller or spray gun. The first layer dries after 1 hour, after this time, a second layer must be applied.

How to choose quality paint

On the this moment in construction stores a huge variety of paints from many manufacturers. Among them - known and not. It is best to purchase the material whose manufacturer has established itself in the market and has positive reviews, since now there are a lot of low-quality products produced by not very decent firms.

Also, one of the main signs of quality is the opportunity to get acquainted with the certificate of conformity. When choosing dyes of the VEAK 1180 water-based emulsion type, it is necessary that the certificate contains the following data:

1. GOST mark;
2. The address of the manufacturer's plant, indicating the legal and actual address;
3. Surfaces for which this composition is produced;
4. All tests passed by the material;
5. The certificate must be certified by the signature and seal of the parent organization. If you are invited to look at previously issued certificates, then you should not refuse, it is better to compare the information.

Water-based paint "VEAK 1180" has such technical characteristics that allow its composition to be used both for internal and external works. Thanks to them, the paint is in the top five of its kind. It is not necessary to purchase the most expensive paint, as the composition of the middle price category will do its job perfectly. The main thing when choosing to pay attention to the certificate of conformity and the manufacturer.

A little about the choice and painting can be found here:

frost-resistant water-based paint VD-AK-1180 is designed for outdoor facade work, but can also be used for painting indoors. It can be used on plastered, brick, concrete and plasterboard surfaces. It is also possible to paint wooden surfaces that are indoors. The paint is perfectly fixed and resistant to external irritants. It is used for painting walls, but is not suitable for processing the floor. As it dries, it forms a smooth matte surface. Breathable coating with green apple scent protects the surface from leakage, negative atmospheric and solar effects.

Technical characteristics of water-based paint vd-ak-1180

• The series is designed for outdoor and indoor work.
• Variety of paint vd-ak-1180 - water-based.
• Coatings for application: concrete, wood, metal.
• Application: can be carried out both indoors and outdoors.
• Gloss - matte.
• Volume - 1.5 liters.
• Color: white, yellow, green, etc.
• Used in the design of interiors, facades.
• Suitable solvent: water.
• Drying time - 1 hour.
• Consumption is 65 ml/sq.m.
• The storage period is 11.5 months.

This type of product may have a different color. The composition includes acrylic resin with the addition of titanium dioxide. Paint VD-AK-1180 has a viscous oily consistency, thanks to which it is resistant to frost.

In a diluted state, it may appear grayish tint, which disappears after the evaporation of a small amount of water.

After the surface has dried, the color remains the same saturated. Paint consumption depends on the structure of the surface.

1. Wipe the surface dry;
2. Dilute water-based paint with water (5%);
3. Clean the surface of the old coating or whitewash.

You need to paint with a brush, roller or spray gun. If the coloring is carried out in two layers with an interval of 1 hour, a more even and durable coating will be obtained. When applied to a primer or a low-responsibility surface, one coat is sufficient. You can remove VD-AK-1180 paint from any surface using a solvent such as turpentine, solvent or soapy water.

While working with the substance, it is necessary to ventilate the room. If paint gets on the skin, wipe the area with acetone or soapy water.

Storage vd-ak-1180

Store the paint in an airtight container, protected from moisture and direct sunlight at positive temperatures from 0 to 30 degrees. It is undesirable to carry out staining during a period of high humidity and temperatures below 7 degrees.

Water-based paint VEAK 1180

Water-based paint VEAK 1180 GOST refers to acrylic paints, so it is mainly used for interior work - and walls. Standard is White color, but with the help of color, any shades are achieved.

VEAK 1180 GOST

How to properly store paint?

Warranty period of storage of water-based paint is 1 year at a temperature of +5 C. Storage at a temperature of 40 C is allowed, but not more than 1 month. The manufacturer guarantees compliance with the quality of the mixture, subject to all conditions of transportation, storage and use.

Water-based paint VEAK 1180, specifications

Technical characteristics of water-based paintVEAK 1180

With manufacturers of water-based paint and product prices, you can.

Application and consumption of paint VEAK 1180

Paint consumption per 1 square meter

The paint is environmentally friendly and fireproof, there are no toxic elements in the composition. It can be applied to any surface and dries quickly. For painting the walls, water-based paint veak 1180 is used, the consumption according to GOST is 150 milliliters per 1 sq.m. To minimize consumption, surface preparation for work is required - cleaning and applying a primer.

Depending on the roughness and absorbency of the surface, the consumption of VEAK 1180 paint per coat is 110–150 milliliters per 1 sq.m. With 2 layers, the service life of the coating is 5 years or more.

How to apply paint correctly

how to apply water based paint

If the paint is frozen, it must be thawed at room temperature. The mixture is stirred until a homogeneous mass is obtained. If it is thick, dilute with water. Surface cleaning and priming is required prior to application. The paint is applied to the surface with a roller, brush or spray gun. After applying the first layer, wait for it to dry and apply the second layer. Intermediate drying time - 1 hour at a temperature of 20 C.

Water-based paint VEAK 1180 price

Prices for water-based paint VEAK 1180 vary depending on the manufacturer, composition, purpose and specifications. On average, in the Russian market, paint costs from 50 to 200 rubles. for 1 liter.

Water-based paint VEAK 1180, the price of products is presented in the table

The minimum price of VEAK 1180 water-based paints is 140 rubles per 2.5 liters. This is how much WORKER Wandweiss paint is used for painting walls and ceilings. An expensive analogue costs 930 rubles for 2.5 liters. This price is set by the manufacturer of water-based paints VEAK 1180 - FIEDAL.

VEAK paints are sold in specialized stores, construction markets and on the Internet.

Features of the use and storage of water-based paint

1. Wide scope of application. Water-based paint VEAK 1180 fits well on any coatings, suitable for painting old finishing materials - other types of paint and special wallpaper. The exception is metal and glossy surfaces.

2. Easy maintenance. VEAK 1180 is easy to use, durable and easy to maintain. To clean the painted surface, you can use ordinary detergents.

3. Dilution with water. Water-based paint VEAK 1180 GOST is stored in a closed container for 1 year. If the mixture thickens, it can be thinned with water.

4. Smooth coatings. When painting with this mixture, we get a smooth matte finish. Interior paint is an environmentally friendly material.

5. Work in conditions of high humidity. Interior water-based paint VEAK 1180 is used for interior painting of structures and buildings. It is applied on brick, concrete, wood and plaster coatings. Suitable for work in rooms with high humidity (bathrooms, kitchen, toilets).

Video: What is water-based paint?