In the article we will consider chandeliers for stretch ceilings. What should they be? What to look for when choosing? How to fix such a chandelier? Let's figure it out.

Working conditions

To understand which chandelier to choose for stretch ceilings, we first describe the conditions in which she will have to work.

• Directly above the chandelier will be the surface of the ceiling. Most often, this is a PVC film that has a maximum operating temperature of no more than 60 degrees: already at 80, the canvas begins to stretch and deform.

This factor is the main factor influencing the choice of a chandelier: a luminaire on stretch ceilings should not give off a large amount of heat to the environment in close proximity to the ceiling.

• The chandelier will have to be fixed to the draft ceiling on a special mounting hook. The suspension will have to partially hide between the stretch and suspended ceilings.
• The surface at the top in the case of a glossy canvas has excellent reflectivity. If we want to hide point light sources and make the luminous flux on the stretch ceiling from the chandelier as diffuse as possible, we will have to make sure that the bulbs are not open from above.
• Above the surface of the stretch ceiling there is free space, which, however, is not ventilated. Theoretically, power converters for low-voltage light sources can be hidden in this space, but in practice they will inevitably overheat with inevitable imminent failure.

Tip: However, low-voltage LED lamps are the most reliable. The problem with the placement of the transformer is solved simply: the wiring from the power supply is pre-wired along the ceiling, while the PSU itself fits into any niche with normal ventilation.

This implies all the restrictions associated with the choice of lamp.

Choosing a chandelier

So, how to choose a chandelier for a stretch ceiling?

Ceiling mount

According to the type of fastening, chandeliers can be of two types:

1. Suspended suspended on a special mounting hook;
2. Overhead use, respectively, a patch panel, which is attached to the ceiling surface with self-tapping screws.

An alternative solution is to move the mounting hook below the level of the stretch ceiling. In this case, before the ceiling is stretched, you need to take care of some revision of the mount.

The location of the horns

One of the popular types of stretch ceiling chandeliers is a chandelier with several horns, the so-called classic.

When using incandescent or halogen lamps, it is worth abandoning the horns pointing upwards. The reason is obvious: they will generate an upward flow of hot air with minimal dispersion, which will heat the ceiling above them.

In addition, many halogens and incandescent lamps have a reflector made right in the bulb, which will focus the radiation again on the ceiling surface. Bright circles of light on a glossy or matte surface will catch the eye.

In addition, as already mentioned, all the details of the device of the horn will be perfectly visible to the viewer in the form of a reflection in the glossy ceiling. Finally, a significant proportion of the light flux from the lamps falls on the infrared part of the spectrum and, again, will heat the ceiling.

Plafonds

A chandelier in the form of a plate (plafond) on a stretch ceiling is a fairly popular solution.

What should you pay attention to when choosing such a lamp?

• Above each light bulb in the ceiling, a reflector from above is desirable. It is a thin sheet of stainless or chrome steel and is not always present in the design. At least in ceiling lamps with a suspension.

Please note: if you plan to use LED lamps with a power supply located outside the lamp and stretch ceiling, you can ignore the reflectors: the ceiling will not overheat anyway.

• In the case of a ceiling covering the lamps from below, it is especially important that the chandelier has a sufficiently long suspension. The reason is the same as the requirements for the presence of reflectors: to protect and remove the ceiling surface from the heat source as much as possible.

The ceiling must have a sufficiently long suspension. The exception is lamps that use LED lamps.

Lamp types

Let's look at the main types of light sources with their advantages and disadvantages.

• Incandescent lamps the cheapest, but they have a ridiculously low efficiency (no more than 3 percent of the electricity consumed is converted into light). What is no less regrettable is that all the rest of the energy they absorb is converted into heating the environment.

We clearly do not have the best choice for stretch ceilings. If you still opt for a chandelier with incandescent lamps, then do not forget about the power limit: the lamps must be no more than 60 watts.

At the same time, the distance to the ceiling surface should be at least 25 centimeters, which is far from achievable in all rooms.

• Halogen lamps have slightly higher efficiency. In essence, these are the same incandescent lamps; however, the halogen environment makes it possible to noticeably raise the temperature of the tungsten coil without fear of its evaporation. In a halogen environment, the atoms of the evaporating coil are deposited not on the surface of the flask, but on the coil itself.

The main advantage of halogens is the spectrum as close as possible to ordinary daylight. The temperature of the flask, however, is higher; the limitation on the power of halogen lamps in such chandeliers is no more than 35 watts.

Please note that there is another limitation associated with halogen lamps. Such a lamp when replacing or installing in a cartridge cannot be taken with bare hands. The fat secreted by the sebaceous glands from the fingers and any other contaminants, burning on the surface of the flask, will cause its local darkening; the consequences are uneven heating and rapid destruction.

• Energy-saving lamps- strictly speaking, not quite the exact name. Traditionally, these terms mean quite specific fluorescent lamps with built-in ballast. Rather high efficiency and relatively weak heating speak in their favor; By the way, it is heated in them, first of all, the power converter.

There are, however, two nuances associated with the use of these lamps. Inside the flask contains mercury vapor. A broken light bulb should theoretically lead to the evacuation of people in the room and its degassing; without carrying out such procedures, you cause serious damage to your health.

In addition, the chandelier used for this type of lamp should not be mounted on stretch ceilings in rooms with high humidity. Dampness will inevitably lead to a rapid failure of the power converter.

Fairly low heat dissipation energy saving lamps allows you to mount them close to the stretch ceiling.

• Finally, stretch ceilings and led chandeliers- this is a completely and completely harmonious couple. LEDs have the highest efficiency among all light sources and minimal heat generation.

In addition, the duration of their life cycle is not only huge, but also does not depend on the number of switching on and off. Finally, LEDs give in the full sense of the word directional light without any reflectors: the LED emits a luminous flux into only one hemisphere.

It is optimal to use low-voltage lamps with a power supply unit common to all horns; in this case, as already mentioned, the power supply must be moved outside the space above the stretch ceiling. Otherwise, inevitable overheating and quick failure.

Low-voltage LED light sources are the perfect neighborhood for a stretch ceiling.

Most people naively believe that in order to create a truly unique and inimitable interior, they will almost have to give their soul to the devil. Meanwhile, you can achieve originality with the help of the basic tools that you have by default: the texture of the ceiling surface and lighting. The main thing is to use these trump cards correctly. If you have another renovation of the hall on your nose, then our today's material is akin to a magic wand - we invite you to take a look at the photo of stretch ceilings in the hall with a chandelier and lamps. We have selected for you 50 interesting options in a variety of interiors, ranging from hackneyed but pretty classics to mockingly bold and pompous art projects.

Requirements for the ceiling in the hall

The hall is often called living room. And this is no coincidence: very often guests are received in this room. All the more serious is the responsibility that rests on your shoulders - to create a cozy interior for everyone in the room and an atmosphere conducive to natural communication.

In addition, the whole family gathers in the hall in the evenings, actively rests, watches television programs or sits comfortably while watching a movie on a home theater. Based on this alone, one can draw a conclusion that is logical as thunder after lightning: it is impossible to ignore the ceiling as one of the most effective tools of expressiveness in any case.

Taking into account the functional characteristics of the room, we tried to put together the basic requirements for how the ceiling in the hall should look and what role it should play in the overall interior of the room:

• direct participation in the functional zoning of the premises - with the help of organized lighting and texture features, you can make one or another accent, for example, highlight a play area with directional light or beautifully emphasize flowing curtains falling from a cornice fixed in a niche;
• color balance - often in the photo of stretch ceilings in the hall with a chandelier and lamps you can see how upwards literally suppresses the bottom of the room with an annoying color performance - this is a designer's mistake and is not allowed for execution;
• correction of visual imperfections - for example, excessive ceiling heights and the resulting aloof atmosphere can be corrected with surface finishes in several levels;
• work to visually enrich the room - if the general design of the hall seems conservative, monotonous and boring to you, then with the help of the right color on the ceiling, you can radically change the impression of the entire interior.

Benefits of using stretch fabric

In the photo, stretch ceilings in the hall always look advantageous, especially if you choose the right chandelier and lamps. This is not surprising: all its potential pvc films they reveal it in spacious rooms, adding a maximum of gloss, solemnity and nobility to the atmosphere.

All the advantages of using stretch ceilings in the hall are below:

1. perfectly flat ceiling;
2. the ability to hide traces of communications and wires;
3. construction of complex and non-linear multi-level structures;
4. visual experiments with living space;
5. expanding the color range of the room;
6. combinations with other types of materials;
7. use of mirror segments;
8. unlimited possibilities of light integration.

Let's pay close attention to the last point - it is the interaction with light sources that allows you to profitably use all the advantages of a particular ceiling texture and build an outstanding and memorable interior in the room.

The relationship of canvas textures with light sources

Looking at the photo of stretch ceilings in the hall with an already decorated interior - with a chandelier, lamps, led strip- most likely, you have noticed that the final light pattern of the room depends on the type of texture of the ceiling surface used. And this is not a secret: the different texture of the stretch fabric, when interacting with sources of general or additional lighting, behaves differently. There are three in total:

1. glossy;
2. matte;
3. fabric (satin).

Glossy

• high reflectivity;
• advantageous combination with spotlights and LED strips;
• visual increase in living space;
• illumination of dark areas.

One of best solutions for the hall by the totality of all its advantages and well-established relationship with the light sources used. Cloths with a glossy effect feel great both next to a classic crystal chandelier, and with mortise spots.

Due to the high reflectivity such a texture is as close as possible to a mirror one, which can be successfully used if there is a desire to emphasize some detail in the interior or consciously highlight the volume.

Examples of the successful use of glossy stretch ceilings in a hall with a chandelier and lamps are in the photo below.

Matte

• looks like ordinary plaster;
• leaves an impression of modesty and restraint;
• does not reflect glare;
• predominantly functional use.

The matte surface has a low level of interaction with light sources in the room. In halls, it is often used to shift the focus to furniture or walls. The inability to reflect light completely unties the hands of lovers of massive central chandeliers with a large number of removable elements - after all, in the case of using such a light source on a glossy ceiling, you risk provoking the creation of an "enchanting" light show, which is likely to get bored after a few hours of your persistent activity.

All of the above can be seen if you look at the photo of stretch ceilings in the hall, where it immediately catches your eye that the matte texture does not interact with the chandelier and lamps.

tissue

• seamless structure;
• expensive attractive look;
• softly and beautifully scatters light.

The most expensive, but infinitely advantageous and beautiful texture, which can be safely recommended if you set out to create a stylish noble interior. Especially in the case of grandiose plans for the use of combined light sources. You can tirelessly watch for hours how satin ceilings skillfully handle light.

Take a look and you - the photo shows fabric stretch ceilings in the hall with a chandelier and lamps of various types.

Features of choosing the color of the ceiling for the type of lighting

The right shade is akin to a successful poem written in a fit of inspiration. In design art, as in poetry: sometimes even combinations that are unfriendly to each other can give a stunning effect. However, they do not cancel the general and well-known rules. After all, exceptions exist only to confirm them, right?

We have selected a few for you useful tips, which may well be useful if you do not know how best to reveal the advantages of a particular color in combination with lighting fixtures in the hall.

1. intense lighting has the ability to greatly lighten the ceiling - so avoid too subtle and weakly pronounced shades to avoid an unnecessary effect of a bleached surface;
2. do not use a combination of a central chandelier with symmetrical spotlights in low rooms - this will cause an effect of congestion, it is best to choose a beautiful one on the ceiling light color and get by with either one chandelier or spots located around the perimeter;
3. LED strip successfully interacts with a shade of any temperature: keep this in mind when you need to lighten or, conversely, darken the space a little;
4. if the hall is located in the shady side of the house, choose warm shades as the main color of the ceiling and emphasize their influence favorably with the help of spotlights.

Examples of the location of lamps and chandeliers

We offer you an excellent scheme that will help you correctly place spotlights around the chandelier in the hall and make the interior more comfortable and expressive.

Below is a photo of stretch ceilings in the hall with a chandelier and lamps in a variety of options.

One-level ceilings

single level stretch ceilings reinforced with a chandelier and lamps as light sources - the most common type of ceiling structure, usually in small rooms. Most often these are halls located in apartment buildings. Someone will say that with such restrictions it is difficult to achieve an impressive result, but we will answer: not at all. And as proof, we offer a look at the photo of single-level stretch ceilings in the hall with an integrated lighting system - a central chandelier and lamps, where the owners managed to emphasize a wide range of color palettes, volume and stylistic concept.

Duplex and multi-level ceilings

As a rule, they can most often be seen in the hall in the format country house, where each room has a proper supply square meters. However, sometimes there are exceptions.

Conclusion

If the photos you saw of stretch ceilings in the hall with a chandelier and lamps did not inspire you, there is no need to be sad about this: rely on a constructive approach. Analyze what you saw, identify for yourself those options that literally did not last a little bit for your approval and think about what you would best change in them. A successful idea with chandeliers and lamps in the hall does not wait for you somewhere in the back streets of consciousness, ready for use - it is born at the moment when you absorb and digest information, and goes through a long path of transformation before you safely bring it into the light.

6193 0 2

Chandeliers for stretch ceilings: ABC for DIY

This article tells about ceiling chandeliers for stretch ceilings and the secrets of their installation. A priori, the owner of the apartment can install any lamp, but some limitations of the model range still exist. This is due to the issue of the safety of the PVC film, which can lose its elasticity and “disperse” from constant heating with light bulbs.

Features of chandeliers for stretch ceilings

The question immediately arises, which chandeliers can be used to avoid local overheating of the coating from light bulbs? Stretch ceilings exposed high temperature up to 60 °C only once during installation. When heated, the PVC film becomes elastic, stretches well, acquires necessary form and cools down, remaining quite elastic.

Choosing the right model

To know for sure which chandelier to choose, remember a simple reminder. So, in order for the PVC coating to remain in its original form for a long time, the following is taken into account:

1. The direction of the flow of light - it should not "rest" against the ceiling, so the horns of the lamp should be directed not up, but down / to the side.

1. The optimal distance between the horns and the ceiling is from 30 to 40 cm.
2. The chandelier-plafond must be equipped with a reflector.
3. The surface of the device must be smooth, the corners rounded. This will become relevant if the neighbors flood - the walls of the water bag, that is, the ceiling, sink onto the chandelier and the slightest burr / sharp corner will rip them apart.

1. Ceiling height - you need to start from it in order to decide which chandeliers are suitable for the room and which are undesirable (plafonds can be considered universal, but a hanging chandelier is good only for spacious rooms).

When deciding how to choose the right ceiling lamp, it is necessary to take into account the texture of the ceiling. Matte PVC and fabric stretch ceilings do not differ much from the usual painted ones. Glossy ones are like a mirror and equally clearly reflect the beautiful and the ugly.

Given this property, it is necessary:

1. Conduct installation work gloved.
2. The abundance of light bulbs in the lamp will double. Will not the abundance of sparkling points get on your nerves?

1. It is undesirable to install a chandelier with large horizontal planes. You will have to wipe them more often than usual, otherwise all the dust will be visible from below.

Shines but does not heat

The choice of light bulbs for a lamp should be treated no less reverently, because each type has a certain radiation intensity, spectrum, heat dissipation and service life. Let's quickly go over the types of lamps, given these parameters:

1. An incandescent lamp gives a pleasant yellowish light, similar to sunlight, is inexpensive, even a child can change it. The disadvantages include colossal heat transfer (which is not welcome in our case) and a relatively short service life - up to 1 thousand hours, which is almost 3 months with 12-hour operation.

1. Halogen is also a “hot thing”, its white light does not distort color scheme, but it depends on voltage drops and requires connection through a voltage stabilizer.
2. Luminescent - has long ceased to irritate with dead light, the spectrum has expanded significantly, the light is soft and does not hurt the eyes. The high cost pays off with a huge working potential - up to 10 thousand hours. The lamp heats up slightly and is well suited for chandeliers.

1. LED - miniature "long-playing" economical. Optionally, you can choose any from cold day to orange. Popular in sky chandeliers.

The optimal power of an incandescent lamp in a chandelier is 40 maximum 50 watts, and halogen 35 watts.

When deciding how to choose safe light bulbs, you should not ignore it. appearance. Modern design fragile products are amazing - pear-shaped, candles, spirals, arcs, balls. Transparent, frosted, painted, mirror can turn a chandelier into one of the treasures of Aladdin's cave.

How to make a mortgage

The mortgage can be wooden blocks, but most often it is made of moisture-resistant plywood - it is durable, does not dry out, and it is easier to find a small piece of this material than, for example, OSB.

Installation of the mortgage has the following sequence:

1. The mortgage is cut out. A hole for the cable is drilled in the center;
2. The surface is polished, treated with an antiseptic;

1. Suspensions are screwed to the mortgage with LN 3.5x9.5 screws (the same ones that are used when mounting profiles for plasterboard walls. They are elastic and rigid enough to withstand a 10-kilogram chandelier);

1. The platform with screwed hangers is attached to the base ceiling with self-tapping screws and dowels. Mortgage of wooden bars is attached directly to the base ceiling with self-tapping screws.

We hang a chandelier: rules and nuances

Depending on the design features luminaire, a method is chosen how to fix it - hang it on a hook or screw it to a bar (regular, cruciform, I-beam).

Mounting method suggests fasteners included in the kit:

1. Hook;
2. Planks: ordinary - for small light chandeliers, cruciform - for figured lamps (round, oval, rectangular), I-beam - for massive appliances.

The rules for installing any chandelier under a stretch ceiling are generally the same:

1. Wiring (optional) open way), installation of a voltage converter, installation of a hook / mortgage is carried out before installation of stretch ceilings;
2. A mortgage is needed under the chandelier - an additional platform. It should match in area with the base of the lamp. It is to it that the strips are screwed on which the device will be held;

Sometimes it is not clear how to hang chandeliers with a large base on cruciform planks. In order not to cut a huge hole in the coating, you can make 5 mortgages instead of one. 5 rings will be glued under them and the same number of holes will be cut out.

1. There should be a distance of about 2 mm between the canvas and the mortgage;
2. The installation of the platform is carried out after the installation of the frame for the stretch ceiling;
3. The diameter of the ring should provide free access to the mortgage when installing the chandelier, and be placed under the decorative cap of the chandelier / reflector.

Installing a luminaire on slats

When the stretch ceiling has taken its place, you can start connecting the chandelier to the stretch ceiling:

1. Find the location of the mortgage using a plumb line (which will be discussed below) or according to the plan. When moving by touch, do not forget to wear gloves so as not to inherit, especially on a glossy canvas;
2. Outline the platform;

Make a copy of the mortgage in advance from cardboard. By combining it with the real under the film, it will be convenient for you to outline it.

1. Cut out the inside of the film;

If there is no construction knife, you can cut with a clerical one. It is quite elegant and sharp and cuts neatly.

1. Pass the cable through the central hole of the platform and the cut ring;
2. On the bar, install the studs symmetrically to the holes in the lamp body;
3. Screw the straps to the platform;
4. Strip the ends of the wires from the network and the chandelier, connect them with the appropriate colors in the terminal block;

Before connecting, do not forget to de-energize the apartment or entrust this work to a specialist.

1. It remains to fix the base of the device on the studs and screw the hardware.

Even if the chandelier is inexpensive, it is better to hang it with an assistant.

Hook light

Let's make a reservation right away, chandeliers on a hook do not need an additional platform. If the old hook has been preserved from the old times, it is enough just to cut a hole in the thermal ring and hang the lamp in the old place. To install a new one, it will be necessary to drill a hole in the ceiling and screw in a new hook.

Depending on the weight of the chandelier, a fastener of the appropriate diameter is selected: for a lamp weighing 3-5 kg, a rod with a diameter of 2-3 mm is suitable, 8 kg - 4 mm, 10 kg - 5 mm. First, a hole for the dowel is drilled with a depth equal to its length, then the fastener is screwed into the dowel.

Problems in such an elementary procedure can literally appear from scratch. We are talking about longitudinal voids, designed to improve the sound and heat insulation of the slab.

You can get clearly between the voids and the fasteners will be screwed in perfectly. Otherwise, you just have to take another dowel - like Molly or a butterfly. Their principle of operation is that they "spread out" in the void, not allowing the dowel to fall out.

Due to the spacer zone, Molly's dowel is difficult to tighten to the end. Make a lever by threading something long and iron into the hook - a pipe, a piece of rebar, a hammer handle (iron!).

But how to hang a chandelier on a stretch ceiling if its weight is very large? In this case, you need to use a driven anchor with notches:

1. With a drill with a pobedite tip, drill a hole 5 mm longer than the anchor, and in diameter, as they say, tightly;
2. Before installing the anchor, carefully blow the hole (it is good to do this with a medical pear);
3. Hammer the hardware with a rubberized hammer, or cover it with a rubber / wooden gasket;
4. Drive in the insert by attaching a metal rod to it, until it stops, wedging the collets;

1. Screw the hook.

Read carefully on the package the size of the anchor and how much weight it is designed for. It is recommended to load the anchor no more than a quarter of the maximum load so that it simply does not fly out of the hole.

Finding a hidden fastening with a canvas is a little problematic. We cannot see through the canvas, it is impossible to intuitively guess its location, and fumbling blindly with our hands is also not an option.

1. Lower the plumb line from the hook so that it touches the floor;
2. Mark the point of contact on the floor, for example, with a corrector, seal it with tape so that it does not wear off;
3. After installing the ceiling, it is enough to lower the plumb line to the point from the ladder. The opposite end of the thread will point to the desired place where the chandelier will be attached to the stretch ceiling.

1. Stick on a thermal ring, cut inside;
2. Hang a chandelier on a hook;
3. Attach wires;

1. A decorative cap rises close to the canvas and is fixed.

Chandelier replacement

If the interior has changed or you are simply tired of the old lamp, the question may arise whether it is possible to change the chandelier on a stretch ceiling. Yes, such an operation can be carried out, but with some reservations:

1. If the fixture is mounted on slats, the slats of the new chandelier must be of the same length.. They can be a little longer, but not shorter, and were placed on mortgages.
2. If the bar is longer and the mounting holes do not match, new ones are drilled after appropriate marking.

Don't forget to keep your sales receipts. If you have to return / exchange a new chandelier, it is better to do it without scandal.

If the lamp was attached by yourself, consider that you already know how to remove it. Dismantling takes place in the reverse order of installation: the hardware is unscrewed, the body is removed from the studs, the electrical circuit is opened. Do not forget to turn off the power supply of the apartment. The hook option does not cause problems at all and there is no point in discussing it.

Summarizing

You can get expert advice on working with a mortgage on the video in this article.

Stretch ceilings are beautiful, comfortable and prestigious. But due to the characteristics of the material, this type of coating will not look stylish in every apartment. A variety of chandeliers for stretch ceilings can add a special charm to the interior of any room in the apartment, as well as individuality in the design of the office space.

When choosing ceiling lamp There are a number of issues, the solution of which may require significant time costs. A wide range of offers allows you to choose a lighting device for both rooms with a standard average wall height, and for rooms in which the ceiling is at a very decent increased height.

If the height of the room is not more than 2.5 meters

Thinking about how to choose a chandelier for a stretch ceiling when installed on a suspended structure in a room whose height does not exceed two and a half meters, Special attention it is worth paying attention to the power of the lamps. The heat that some light bulbs give out may well damage the stretched fabric or film. When calculating the number of light sources and their power, one simple rule should be observed that will help to make right choice in a variety of offers.

When installing incandescent lamps in a lamp, the distance from the lamp to the canvas should not be less than 30–40 cm.

Only under such conditions will the film or fabric coating not react to heat from an incandescent light bulb. When installing LED lamps new generation this problem is removed.

Chandelier on a mirror plane

When choosing which chandeliers are best for a stretch ceiling and the most suitable, it should be noted that for rooms with low ceilings, a rational lighting design option would be to install a glass plane in the form of a plate with several lamps or a classic-looking chandelier with shades pointing down to maintain the necessary gap between the stretched surface and a lamp.

When installing luminaires in rooms up to 2.5 meters high, it is necessary to follow such an important point as heating a metal plate that fits snugly against a film or fabric. By blocking the entrance of the wires to the coating, such an overlay can become very hot and spoil the appearance of the stretched material. But almost all chandeliers for stretch ceilings in Leroy Merlin are protected from such troubles and cannot damage the synthetic coating.

Chandelier with shades pointing down on a glossy stretch ceiling

When installing dish-shaped lamps and directing the light upwards, experts recommend using energy-saving light bulbs or LED lighting. The cold light of such lamps, even being in close proximity to the synthetic coating, will not heat it up to a critical temperature. But lighting fixtures that use conventional incandescent lamps must be deployed in the opposite direction from the coating.

If you like the classic types of lamps on a long chain, then you may have to make some changes to the design of the chandelier:

• In order not to touch the head of the lamp, reduce the length of the decorative chain to a minimum;
• Expand the lampshades of the ceiling device for lighting in a downward direction;
• To reliably maintain the integrity of the surface of the stretched web, use only cold light;
• Use luxury crystal chandeliers only with halogen lamps.

Luminaires for rooms with a height of 2.5 meters

With high ceilings in the room, the choice is limited only by the preferences of the buyer and the size of his wallet. The only thing to remember is that the ceiling chandelier should be at least 40 cm from the canvas. The best option would be a lighting fixture mounted on a long pendant. Such lamps are suitable for almost any interior and are completely harmless to stretched panels of various qualities.

When deciding which chandelier to choose for rooms with a high ceiling, do not forget about creating sufficient lighting at the bottom of the room. With an overestimated arrangement of light sources, their number should be increased.

The ideal placement of a single device under a high ceiling can be considered:

• Installation of luminaires with several lamps up to 60 watts;
• The presence of a sufficient distance, approximately 40 cm, from the lamps to the stretched cover;
• The direction of the rays of light downwards to avoid heating the surface of the ceiling;
• High-quality professional lighting installation.

Using this approximate list of requirements, you can quickly select a chandelier for rooms in which fabric or film stretched panels are installed.

What to buy and how to properly install

The installation of a stretch ceiling and the rules for caring for it are described in many accompanying instructions for the installation and operation of a particularly fashionable ceiling covering. But they do not describe in sufficient detail which chandeliers can be used relatively fearlessly in the presence of a stretch ceiling, and which must be refrained from buying.

When buying lighting equipment, it is necessary to take into account some performance characteristics of stretch ceilings. For example:

• A glossy finish will create additional lighting in the room due to the numerous reflections coming from point light sources;
• With strong illumination from below, hidden communication lines can shine through the surface of the ceiling tension coating. This is the second decision-making factor when buying chandeliers with shades directed downwards.

In addition to the fact that it is necessary to choose the right model of the lighting device, it is also necessary to correctly install it. An ordinary metal hook or plates fixed to the floor slabs with installation screws will be quite enough for the competent installation of many chandeliers from the distribution network's offers.

In the photo, one of the ways of attaching a chandelier to a hook with a embedded plate

There is a preconceived notion that when installing fabric or film coverings, bulky classic multi-track chandeliers with crystal decorations and candle-shaped lighting bulbs should not be used. But experts point out that it is possible to hang on a stretch ceiling and quite voluminous and heavy chandelier designs. The main thing is that the method of fixing the chandelier on the hook is simple and does not require additional drilling of the ceiling plate. A reliable and strong hook, installed by a specialist installer, will hold the heaviest crystal chandelier with numerous pendants.

The top of the chandelier

When choosing the style and shape of the main lamp in any room, special attention should be paid to the choice of its upper part. It should be noted that after installing the chandelier under the stretch ceiling, the reflection of the upper part of the lamp will be visible primarily on the coating made of glossy film.

Hide mounting hooks, metal plates, wires, mounting screws and other non-aesthetic but necessary elements of each ceiling light best with a deep and beautiful bowl. It is desirable that this separate design of a room lighting fixture be light in weight and have a slim but strong body.

For glossy stretch ceilings, it is advisable not to use multi-track lighting fixtures. Additional reflection of light sources from a glossy surface will create unpleasant glare.

When buying ceiling lamps or horns of lighting equipment, in order to avoid the appearance of dark spots on the stretch ceiling that are difficult to remove, it is worth making sure that the ceiling lamps are directed straight down. The dust that settles on the surface of the lamps burns out when heated and, when wind or draft enters the room, moves up, leaving a black mark on the stretched coating.

Ideally, each chandelier suitable for installation on a stretched film or fabric surface should be equipped with additional downward reflectors. This is a specially installed rectangle, oval or square made of chrome or stainless steel. Its location above the lighting lamps will protect the stretch ceiling from overheating and damage.

Complementing the beauty and style of the coating, the chandelier should not create unwanted glare and bring disharmony into the room. Therefore, when choosing, a few practical tips can be useful:

• To place on a glossy canvas, use lamps with a large number of lamps, which, when reflected, will create soft diffused light;
• Avoid amplifying lighting due to ceiling lamps with reflectors pointing upwards;
• For a room with a small area of ​​​​up to 10 square meters, it is enough to use 3-4 light sources. Large rooms will require an increased number of ceiling lights;
• With an elongated shape of the room, use chandeliers with shades located along the long side of the room. This arrangement of light sources will illuminate the space without resorting to installing additional wall lamps;
• In square rooms, plates with a uniform direction of light rays in different directions look great.

It is pleasant, comfortable and very convenient to use a beautiful and elegant chandelier in combination with a modern stretch coating. Especially if the design of the lighting device you liked was sold with a control panel. Using the remote control functions when using modern light sources, it is possible to reduce the brightness of the lighting or increase it without getting up.

Remote control main lighting fixture indoors, first of all, it creates additional comfort and convenience. Taking advantage beautiful ceiling, carefully selected with love, a chandelier with a modern control panel, you can have a good rest at home and invite friends or relatives to your place. The stylish design of the room will appeal to absolutely everyone.