Completed, it remains to install lamps under the cabinets to illuminate the work area. How to create comfortable lighting so that the light does not blind your eyes, so that the lamps look good or are invisible, and the products on the countertop look appetizing? Let's look into these and other issues of furniture lighting for the kitchen.
kitchen lighting options
Where and where can I install / build in lighting fixtures kitchen set?
The kitchen is everyone's favorite home. This is the most living room in the house, where they eat food, talk, and children do homework. Therefore, this space deserves special care, especially regarding the choice of lighting. Our advice is to design the location of the light points with great care. The ideal part is to divide the kitchen into functional areas according to the actions you have to perform and install independent switches to various sources Sveta.
This system allows you to light only where you need it and change the atmosphere of the room whenever you want. Kitchen lighting needs to be efficient, allowing you to see what you're doing well and avoid those annoying and often dangerous indoor accidents. For this reason, it is important to think about direct light sources such as those for some spaces such as ovens, countertops, sinks, and tables.
- Under wall cabinets: in the corner between the bottom surface of the cabinet and the apron, in the middle of the bottom surface of the cabinet or closer to the end as shown in the photo below;
- Under the upper cabinet directly above the sink - such lighting can be both built-in and overhead. It can be brighter than the lighting under cabinets, but at the same time, it is important that it does not blind your eyes. And, of course, the lamp above the sink should not be afraid of moisture and water splashes;
They can be placed under shelves, on shelves or under skirting boards to accentuate kitchen lines. Since it does not radiate heat, you can place it on any surface without fear of damaging it. For the table area we offer you soft light.
In terms of general kitchen lighting, we advise you to choose pendant lights that are simple or suitable for small to medium environments. Another little trick you can use to add light to a room is to place a fluorescent tube or bar on your kitchen cabinets. This way you will get indirect and reflected light from the ceiling.
- Above the kitchen cabinets;
- Inside cabinets and drawers;
In the afternoon and evening, you can opt for small light bulb lamps that can bring warmth to the kitchen. By using the device as a dimmer, you can adjust the amount of light in the room according to your needs.
In addition to its practical function, light can be a real addition to furniture. You just need to light up some details of the kitchen to create a unique atmosphere. For example, an image or accessories hanging on the walls can be perfect subjects for highlighting.
- In the plinth of the kitchen set to create the effect of "floating" furniture.
The latter options are decorative and rather of secondary importance, and the first option is really mandatory for lighting the working surface of the kitchen, that is, countertops and sinks.
We help you light up your kitchen!
If you are looking for inspiration, visit our website and discover many ideas to brighten up your kitchen. You will find the best deals to give light to your kitchen with great visual design. We are active in the provinces of Rovigo, Padua, Venice and Ferrara. For any information, please feel free to contact us.
Illuminated lower cabinets in the kitchen
The kitchen area is one of the most functional areas in the house, and in order to use it as much as possible, it must be well lit. And this will happen after the correct components are selected. Let's take a closer look at what is based on right choice and where to buy it?
Types of furniture fixtures and lamps
Lamps for the kitchen, installed under the cabinets are:
- Built-in - they look much neater, they are not visible from below, due to this the light does not hit the eyes, but such lighting requires more careful planning of work and drilling of the lower parts of wall cabinets;
How to choose the right lamps?
Traditionally one lamp is used in the middle of the room and that's it. But if we think about it, it will not effectively illuminate the whole space, and we are working with sharp knives and hot vessels. For this, it is necessary that every corner be clearly visible, first of all for our health, and secondly, to ensure comfort and comfort during cooking.
The right choice occurs in three stages: varieties, type, power. The latter type is more popular due to its compactness and discretion; Type is the responsible task of choosing products so that the appropriate bodies fit the entire layout. Most European chandeliers are common to most European consumers; Power can be positional. If there is a chandelier in the middle of the ceiling, it is nice to have more energy and less additional elements for visibility in certain areas.
- Diversity.
- There are two types - suspended and built into the ceiling.
- The first is better suited for tall drawers, and the second for lower ones.
- If the finishes are not made in any particular style, follow the colors of the furniture.
- Overhead - such lamps are convenient in changing lamps, they can be installed anywhere and for this you do not need to cut holes for installation.
The store has a huge catalog of items with different ice and ordinary ceiling lights. Wall options and different layout styles are also available to give you more choice and choose the right one for your occasion. Available in elegant, curved and oval shapes, rectangular and sharp corner models, made from quality metal polished alloys to improve overall appearance and comfort in the dining room. The products are available at extremely affordable prices and with high quality.
Because we only offer a wide variety in one place to make you the best choice on reasonable prices. Shopping in the store is so easy that with just a few clicks you can expect all the groceries you need at the door of your home or office without even leaving it.
And now let's take a closer look at the various types of fixtures and lamps:
Also see our other articles:
- Surface luminaires with fluorescent lamps daylight. There are special kitchen series with the possibility of mounting under cabinets and above the sink. The power supply is connected only to the first device in the line, while up to 10 lamps can be installed in one line, so there will not be many wires. We also advise you to look for models by the type of rails on which you can hang kitchen appliances.
These are the two most popular profiles available in 3 colors characterized by easy assembly and modern design. This will maximize the amount of light on the counter. If we install this profile on a wall, we will lose half as much light scattering. Obviously, with this setting, the light will be well distributed, for example, on tiles or other decorative elements of the wall, but it will be darker on the table. This is the infographic below.
It is designed in such a way that as much light as possible is emitted in the center of the work surface. This is very good decision for kitchen lighting. In short, we can describe our lighting offer dedicated to drawers. In addition, if the client has drawers of non-standard sizes, we are ready to produce such furniture lamps for a specific order.
This countertop lighting is convenient and does not require drilling holes in wall cabinets for embedding. All work on the installation of lighting to kitchen furniture can be carried out independently and quickly. To make this lighting more decorative, overhead lamps can be installed behind a special profile. Then the light will not go forward, but the surface of the countertop will be fully illuminated.
Do-it-yourself kitchen lighting installation
Fact of presence own production gives us the advantage of being very flexible in anticipating our clients. 
Used in the bedroom or dressing room, this will allow you to conveniently explore the drawers without having to turn on the light and thus wake up the other person, for example, in the late evening or early morning when it is dark.
Illumination of the working area in the kitchen
Especially in places like pharmacies or jewelry stores. One fixture produces a light output of 280 lumens, resulting in a well-lit work surface. The advantage of this solution is that there is no need to install an additional switch in the furniture, which will certainly be appreciated by carpenters, because it will facilitate and speed up the assembly of lighting in kitchen furniture. Users will have convenient and practical lighting at their fingertips.
- Lighting for the kitchen set based on LEDs is also deservedly popular. Moreover, remote panels and touch switches are often used for such systems. Main advantages LED backlight in the following: the diodes in the lamp are located very often, which makes the tape a worthy alternative to the overhead lamp in terms of the brightness of the light flux. The photo below shows how well the work surface is lit.
Proper lighting of the kitchen space will allow us to comfortably prepare culinary delicacies. Depending on the type of lighting used, it will more or less closely match the colors of the ingredients that we see in natural light. When choosing the right type, we must also take into account the decorative considerations we use to use lamps that give streams of spot light.
The kitchen is a special place. It is used for cooking, so it needs proper care to keep it hygienically clean. We often visit it during the day and in the evening, not only to eat food on the kitchen table, but also to drink a cup of energetic coffee or aromatic tea. Here, if there is enough space, the children, under the supervision of a parent, prepare their books and notebooks and do their homework. Here we meet after a full day of work and talk about current events - the kitchen is a family place where the climate serves sincere conversation.
In addition, these systems are compact, and you can come up with a lot of kitchen lighting design options - with their help, it is easy to form triangular, round configurations in a variety of colors. Installing LED lighting with your own hands is very simple. However, the LED module is quite expensive, requires connection through a transformer, and the brightness of the LEDs decreases over time.
Usually this place is used together early in the morning and with early morning before lunch, and due to the small amount of natural light at this time of the day, we have additional sources. The central lighting still present in the kitchen does not allow us to work comfortably when trimming vegetables and preparing meat or vegetarian dishes. Standing on a rack placed in the nearest company with hanging shelves, our silhouette casts a shadow on a place that should be light and clear. In the same way, when sinks, it is difficult to effectively wash vegetables from traces of soil and other contaminants, since we cannot see them. .
- To illuminate the countertops and kitchen set, you can use and Spotlights- spots with LEDs. They look the same as fluorescent lamps, but do not lose brightness and do not generate heat. it also comes in different sizes and types, the spots can be both built-in rotary and overhead. Perfectly combined to illuminate corner and linear areas.
For this reason, it is necessary to provide these places that will facilitate our culinary activities. The kitchen table sets the cooking area. In large and spacious rooms, it occupies a large space that requires uniform lighting. His choice is influenced by the nearest furniture environment, from which it is especially useful to use the lower part of hanging cabinets. As long as they are not located above the line of sight of the person using the workspace, they will successfully serve as a source of illumination.
Otherwise, the light beam will be in the eye and will adversely affect the comfort of cooking. In this case, it will be necessary to use a photosensitive cover on the person's table. The main benefit of using neon lighting over a kitchen countertop is that it emits light that prevents hand and kitchen utensils from creating the right shade, making it much easier to get the job done. Lamps are now being produced with true color rendering and we can also choose their color temperature to match the effect we want in the kitchen.
The basics of comfortable and beautiful countertop lighting
- Illumination in the kitchen under the cabinets looks best in the white spectrum. This spectrum does not distort colors and is as close to natural as possible - and this is important when cooking;
- If you want to make the kitchen more cozy and give it a warm feeling, then choose lamps with traditional warm light;
- It’s good when the countertop is illuminated not by one or two light sources, but by several at once - this is how sharp shadows are eliminated from the working area and the lighting becomes soft;
Historically, when planning residential buildings in the Soviet state, the comfort and convenience of residents were taken into account last, because the main task was to give as many people as possible the cherished square meters. A significant part of the housing stock is still made up of houses built in the Soviet period, with small uncomfortable kitchens that absolutely do not meet the requirements of modern housewives.
This small kitchen is so well arranged that in the daytime you can do without lighting work areas.
Therefore, they and their husbands have to independently solve the problems associated with increasing comfort in the kitchen. One of these problems for many kitchens is the insufficiency or unevenness of lighting, which today is easily solved by the correct lighting of the kitchen set.
The importance of properly planned lighting of work areas in the kitchen
The kitchen is invariably one of the most popular places in the house, and the atmosphere that will reign in it, how it will be perceived, largely depends on the daily mood of the residents. A dark, gloomy, cramped, poorly planned kitchen will evoke appropriate emotions, but such options are quite common. Sometimes even a large-scale redevelopment of an apartment may not give the desired result. In this case, you can try to change the situation with the help of lighting effects.
Many designers use dark colors to decorate the kitchen, and properly selected lamps emphasize the elegance of the interior.
Properly selected lighting can turn an unsightly room into a cozy corner where all hardships are forgotten, and also perform an absolutely utilitarian function - to make working in the kitchen more comfortable by illuminating those areas that do not fall into the field of light of the main lamp. Most often, such a zone is a work surface located along the wall of the kitchen. The person standing in front of her blocks the light with his own body, and attempts to turn around so that it becomes lighter are usually unsuccessful.
The layout of this bright and spacious kitchen does not take into account the location of natural and main light sources, so it is necessary to install a backlight in the working area
In this case, the best option is to install a light source above the work surface itself, and this is best done using the backlight of the kitchen set.
Basic requirements for kitchen lighting
Kitchen sets today can be selected for every taste, any color, made in the most different styles arranged at the request of the customer. At the same request, you can install the backlight of the headset, which usually runs along the bottom of the kitchen cabinets. Previously, installing the backlight required effort and was accompanied by various difficulties, ranging from installation and ending with the replacement of parts that had become unusable.
Today, installing the backlight of a kitchen set will not cause difficulties even for people far from electricians due to the widespread use of LED strips. The advantages of LED strips are so obvious that other types of backlights are practically not used in the backlighting of kitchen sets. Among the main advantages are ease of installation and subsequent maintenance, safety and efficiency.
The most common lighting installation mistakes
The main mistakes when installing kitchen lighting:
- Unsuccessful planning of the lighting scheme, as a result of which the need to replace parts can lead to the dismantling of the entire headset.
- Characteristic for a creative impulse is the placement of lamps in all available places, even where lighting is not needed.
Do-it-yourself kitchen lighting installation
To install the backlight of a kitchen set from an LED strip, you will need:
- the LED strip itself;
- PVA cable for powering the tape with a cross section of 0.5 sq. mm;
- soldering iron, solder and rosin;
- 12 volt power supply (you can use a sealed or non-hermetic power supply made specifically for a network of LED devices, but on the Internet you can find messages from craftsmen who successfully used other power supplies for these purposes, for example, from a laptop);
- insulating tape;
- scissors.
The tape should be checked immediately in the store - it should not be damaged, any minor defect can affect the operation of the backlight. After that, the voltage of the power supply and the tape is checked, which must necessarily match. If soldering skills leave much to be desired, it is possible to connect network elements using connectors, however, many consider them less reliable than a solder joint.
Now it remains only to assemble all the components into a single system and check its operation. During operation, you need to remember about observing polarity, about the reliability of soldered joints, about the need to isolate contacts. If everything is done correctly and after connecting to the network the tape lights up with bright lights, you can proceed to the final stage - fixing the tape in the kitchen.
What to look for when choosing an LED strip
There are several options for illuminating a kitchen set using LED strip. The choice of option is determined mainly by personal preferences and lighting requirements, depending on them, you can take a tape with the number of LEDs per meter from 30 to 120. The most common option is 60 LEDs per meter, but designers believe that if the kitchen itself is bright, then 30 lamps are quite enough.
The most common ways to mount LED strip
After that, the color of the LEDs is selected, which is presented in a wide palette of shades with the ability to control their brightness using a remote control. But all these characteristics are more likely to be design delights, and for a simple additional illumination, white diodes of a cold or warm glow are quite enough. Since a woman traditionally spends more time in the kitchen, she is given the right to a decisive vote in choosing the color and tone of the tape.
Today, almost all the lighting of kitchen sets is carried out using LED strips of different colors and densities.
The kitchen is a special place and therefore everything related to electricity in the kitchen is presented Additional requirements security. The backlight may be located in close proximity to the stove and exposed to steam and high temperatures, which can lead to the destruction of the LED strip. Do not forget about the neighbors from above, who, without any malicious intent, can flood the kitchen, and water that has fallen on electrical appliances will lead to a short circuit. To avoid this, it is better to choose a waterproof tape, and if the tape is not waterproof, then it can be treated with thermal varnish for engines, the result will be almost the same.
Pin led strip on the bottom of the kitchen cabinets, you can use double-sided tape, after degreasing the surface, or you can use the self-adhesive base of the tape itself. To complete the lighting of the kitchen set, you can hide the wires and the power supply in the cabinet, having previously drilled holes in it in the right places. If everything is done correctly, then the lighting of the kitchen set will add comfort, originality and coziness to the kitchen.
