Plastic entrance doors for a private house. Entrance plastic doors for private houses: description and photo

Advice! The reliability of frosted armored glass is especially high, which can prevent uninvited guests from entering the house, as well as protect from prying eyes.

The entrance plastic door with a double-glazed window looks spectacular and emphasizes the taste of the owners.

Plastic doors are one of the most aesthetic options for your own home. In addition, this design is ideal for both brick and stone walls. It will also advantageously combine with concrete and wooden walls. However, in the latter case, it is desirable that the plastic from which the door is made is.

Plastic entrance door for a private house, imitating natural wood with frosted glass, for a house sheathed with wood siding

Thus, plastic entrance doors for a private house are a universal design solution. In this case, you can choose both a deaf dense canvas, and an option equipped with glass. In the latter case, there is a wide variety of design options. So, glass can be additionally decorated with any pattern. In addition, you can choose between matte, clear or tinted. The choice is yours.

A bright orange plastic door is a highlight of the exterior of a private house, combined with a general laconic design

Being engaged in the design of the door, one should not forget that it must be combined with the exterior of the building. Therefore, you should choose the right accessories. For example, hung above, on the side or above the door frame can play an important role in exterior design.

Having decided to install a plastic door in your private house, you get another significant advantage. Indeed, in this case, you can create curvilinear structures. As a result, you can get a unique combination arched doors and windows of similar shapes.

How to adjust a plastic front door

Even if you are a happy owner, be prepared for the fact that even it will need periodic adjustment. This is due to the fact that even a high-quality door can sag over time. For adjustment front door screws are specially designed, which are located under the decorative strip of the hinges. The screws, which are located at the bottom end of the hinge, are responsible for moving the web in the vertical direction. To adjust them, you should use hexagons.

The hexagon will also help to adjust the lock bar. However, in this case, a regular screwdriver will do. If you have a sagging corner of the door, then you need to tighten the horizontal screws. They are located in two loops that are at the top. To facilitate the movement of the entire sash to the right or left, turn the screws in all hinges. Please note that the screws that are directed inward serve to comfortably adjust the pressure of the box to the frame.

Thus, adjusting a plastic front door is not a difficult task, so its need should not become an obstacle to acquiring such a model.

AT An important component of any house and its face is the door at the entrance. It complements the style of the building and helps create appearance facade part. Plastic entrance doors for a private house are becoming more and more popular: photos that can be seen in this review. Initially, similar structures adorned the facades. public buildings, and now metal-plastic structures are increasingly used in residential buildings.

Standard model made of plastic material

The advantages of plastic door models include an extensive range design ideas and non-standard solutions. Entrance plastic doors well protect the building from noise and adverse weather manifestations.

It is worth highlighting the following advantages of such products:

• A wide choice of stylistic solutions, which is represented by various configurations and a wide variety of color palettes. Plastic products can be made with wood imitation, decorated with beautiful stained-glass windows and original textured glass.
• The material has excellent sound absorbing properties.
• Differs in simplicity of leaving.
• Plastic is characterized by resistance to temperature fluctuations, high humidity and ultraviolet rays.
• At correct operation plastic does not need to be replaced or even repaired.
• Has an affordable price.
• Plastic structures are strengthened metal frame.

Plastic products can be used as entrances on balconies, when dividing office space, in garages, basements and for passages between rooms.

Useful information! Plastic structures are also equipped with additional anti-burglary devices. Leaf profiles are equipped with steel plates with a closed section. Crossbars are used, which are mounted in the canvas. Elements of anti-burglary fittings are installed.

What are plastic entrance doors for a private house made of: photos and design examples

To create plastic entrance doors for a private house, photo examples of which you will see in this review, special profiles are used. These parts are divided into special air chambers and have stiffeners.

Profiles can be made using metal fittings. All components are connected by mortgages. On many input structures, closers are mounted, as well as power loops. Special locking mechanisms are mounted along the perimeter, which ensure a high-quality fit of the door.

Plastic products consist of the following parts:

• The box consists of a profile frame. The structure is reinforced with a steel frame.
• The canvas is additionally insulated with heat-insulating material. Partially the door is made of armored glass.
• Crossbar locks are used as fittings.
• The threshold is made of aluminum or steel.

Sectional profile of a plastic product

Plastic doors can be hinged, sliding or folding. Such products are well suited to brick, concrete, stone or wooden walls.

Useful information! The price of structures depends on the thickness of the double-glazed windows, the quality of the fittings, the depth of the profile, decoration and the manufacturer.

Components of a plastic door

Entrance metal-plastic doors can be deaf and transparent, the photo shows this perfectly. Sandwich panels are used for deaf structures. Glass filling can be combined. At the same time, the area in the upper part is equipped with a double-glazed window, and the lower part remains deaf. The glass used can be frosted, corrugated, colored or transparent.

The design of the door can be double-leaf, single-leaf or equipped with a transom. Double-leaf canvases are shtulpovye. Locks can be mounted under the handle-arc or under the push handle. Also, the structures are equipped with closers.

Design nuances

Complementing the overall style of the building are plastic entrance doors with glass for a private house, photos of which are presented below. Such structures are characterized by reliable soundproofing qualities and provide good thermal insulation. They look great with buildings sheathed with siding, with brick or stone walls.

The advantages of plastic products include the ability to apply curvilinear configurations. In this case, it is possible to create arched structures.

Various mechanisms can be used:

• Swing structures in which the sashes are set in motion with the help of rotating hinges.

• Pendulum can open in two directions.

• Sliding types help free up the area in front of the door.

• Semicircular models that move with the help of rail devices look interesting.

• With a telescopic mechanism, many shutters are used that slide into each other.

In the production of entrance structures, different types of glass are used. In this case, relief models, triplex, matte are used, and mirror surfaces are also mounted.

The nuances of installing a plastic front door

When deciding which plastic entrance doors to choose for a private house: photos and prices will help you make the right choice. An equally important issue is the procedure for installing doors.

• You should not design a threshold on your own, it is better to purchase a door with a ready-made element.
• The box is inserted into the opening and two wedges are placed from the sides. Then the desired level is checked with a fixed door.
• Drilling holes for mounting the frame. An equal distance is measured from the planks of the box. Dowels are inserted into the recesses made.
• Bolts are screwed into dowels. The level checks the evenness of the structure.
• The frame must be cut in a vertical position.
• When the canvas is level, the installation is checked horizontally and vertically.
• Cloths are put on loops, and the clamp and stroke are checked.
• The area between the elements of the box and the walls of the opening is foamed.

If the door becomes beveled, then it needs to be well adjusted. When the canvas closes with great difficulty, this is due to the sagging of one of the wings. In this case, you need to pay attention to the loops.

In case of weakened pressing to the opening of any part of the box, it is necessary to adjust the vertical clamping. In this case, it is required to remove the plastic lining from the hinges and reinstall the screws that are directed inside the structure. In case of poor pressing of the sash from above, it is necessary to adjust the screws located in the upper part.

Useful information! If the door is skewed to the side, then the canvas moves to its hinge. The screw position is being adjusted.

Video: adjusting the flaps of the plastic sheet

Useful tips on how to choose plastic entrance doors for a private house: photos and prices

Door leafs must be reliable and durable. At the same time, the canvas is additionally insulated and equipped with good sound insulation. The cost of the product depends on the manufacturer. Domestic models have a lower cost compared to imported ones. Before you go shopping, you should measure the opening.

Many manufacturers of door devices use material from popular brands: KBE, Veka, Gealan. Plastic structures have a lot of advantages against the background of low cost. Such products fit perfectly into any exterior.

Video: what you need to know to choose the right PVC doors

Excellent heat-, sound-proof and high decorative properties allow the use of plastic doors as entrance structures of both retail and office premises, as well as private houses and cottages.

Doors - the most important constructive and decorative element building exterior. Despite the fact that plastic structures are less durable than metal doors, spectacular and outwardly attractive PVC products widely used for arranging entrance groups guarded office and industrial premises and private houses equipped with a reliable alarm system.

Such doors are installed not only at the entrance to the house, but also to the pool, winter garden, garage and other buildings.

Polyvinyl chloride (PVC), which contains special stabilizers, Can withstand very large temperature fluctuations and is a very moisture resistant and durable material.
Reinforcement of plastic entrance structures with metal inserts allows you to reliably protect the premises from illegal entry.

Advantages

• external attractiveness;
• diversity color solutions: they can be chosen both to match the building, and, on the contrary, to make the most bright element finishes;
• the presence of glass inserts allows you to provide additional lighting premises during the daytime;
• high heat and sound insulation: according to these parameters, they most often surpass metal and wooden structures;
• high stamina to decay;
• moisture resistance, the possibility of using in unheated rooms;
• ease of sliding shutters;
• resistance to mechanical damage: the introduction of special additives significantly increase the strength of the material;
• durability;
• maintainability;
• fire resistance: unlike wood, PVC is flame retardant material;
• ease of care - they are washable any soap solution;
• wide range of prices.

The design of the entrance plastic doors

For the manufacture of quality entry doors use a five- or seven-chamber profile.
Standard inlet plastic block consists of:

• profile frame, the strength characteristics of which are enhanced with the help of steel frames;
• plastic door leaf, inside which is heat-insulating material and galvanized steel;
• triplex glass inserts, in products upper class used armored glass;
• crossbar (safe) locks;
• steel inserts blocking access to locks ( not used on all models);
• threshold from plastic, steel or aluminum with thermal insulation.

Plastic input blocks can have the following design:
hinged: single-leaf swing doors are most commonly used, double-leaf doors are used less often;
sliding: the movement of the sash is carried out along the guides.

Design

Plastic products are excellent Compatible with all types of walls brick, stone or concrete. Houses built of wood can be equipped with PVC doors with a wood-like finish.

The door leaf can be both deaf and be equipped with double-glazed windows from transparent, frosted, tinted or even mirrored glass of various shapes and sizes, with or without a pattern.

The undoubted advantage of plastic products is the ability to give both its individual elements and the entire door frame and leaf a variety of curvilinear shapes, which significantly increases their aesthetic properties.

Adjustment of the entrance plastic door

Any, even the most high quality front door under the influence of its own weight, it can sag over time, therefore, it requires periodic adjustment. For these purposes are intended screws under the trim loops. This adjustment is made using a Phillips screwdriver and hex keys.

To raise a sagging corner, tighten horizontal screws located in the top two loops. To move the entire sash to the right or left, turn the screws in all three hinges. The screws pointing inwards are used for pressure adjustment door frame to frame.

The screws located at the bottom end of the loop are responsible for moving the web in the vertical direction. They are adjusted using hexagons. The lock striker is also adjusted with the same tool or screwdriver.

Prices

The price of products depends on depths plastic profile, the quality of fittings, the thickness of the double-glazed window, the presence of special anti-burglary systems, as well as the method of decorating doors. big cost impact The choice of the manufacturer also has an effect: elite products are several times higher than domestic models.

Manufacturers supplying plastic doors to the central part of Russia are large Moscow companies European Windows, Constellation of Windows, Oknastreet, the New Dialog factory, etc. Well-known Russian companies use in the production of high-quality German plastic VEKA, REHAU, KBE, GEALAN, REHAU, South Korean LG CHEM, Belgian aluminum profile Reynaers, etc.

Delivered to our country prefabricated plastic entrances and well-known manufacturers from Germany, England, Turkey, etc.

Reviews

“From the outside, plastic doors certainly win. However, I’m afraid to install it in the cottage: I don’t have an alarm system, and, unfortunately, I don’t have security.”
Alexander, Lyubertsy

"I totally agree. In offices, shops, they look quite respectable. But I can't imagine in a private house. AT utility rooms- Yes. But the front door to the house should be only metal. By the way, steel doors from Europe can also be quite interesting in terms of design.”
Snezhana, pos. Peaceful

“Unfortunately, I put in cheap Chinese metal. In the second year, the paint slipped from the snow, the door looked creepy. I found a special paint, peeled it off, painted it, but the view is not the same. I won't dare to put a plastic street one. The office has solid security, an alarm system. And I have a teenage dog on a chain.”
Grigory Petrovich, cat. Green gave

“We have an unheated veranda. A white plastic door was installed on it. Looks perfect. The door to the house is made of high quality iron. As I remember now, five years ago they paid eighteen thousand for it. The plastic ones were much cheaper. But she has no complaints either. Serves right.”
Alexey, Moscow

“On the veranda - I agree. By the way, the idea is not bad. I am planning a small extension in front of the house, and I will put plastic there. ”
Alexander, Stupino

About the cost of installation work interior doors detailed article.

You can find out by infrared warm floor and the features of its laying under the laminate.

I have a private house. Before ordering entrance doors, I chose a manufacturer for a long time. For me, quality and design are important, cost is in second place. When I finally decided where to order, I came to the company already knowing exactly what kind of door I want, because before that I had seen something like this with my friends - a plastic double-leaf door with a rounded top. The design was discussed with the manager for a short time, they only offered me different shades of plastic, but I settled on white. I chose dark brown glass, with a pattern, German plastic, German fittings too. It turned out a little more expensive, but I never save on quality. The fitter arrived promptly and completed the job on time with no delays. I was very worried about the installation. I was afraid that the craftsmen would strip or soil the wallpaper in the veranda, which had recently been renovated. There were no incidents. Even small debris was taken away. Previously, I glued foam rubber under the door and in the cracks so that it would not blow in the winter, but now you don’t need to do anything like that. In the veranda it became much warmer and, of course, more beautiful. From the street the door looks simply gorgeous, and inside the house too. This beauty cost me twenty thousand, now, probably, they will cost more, because I put them a couple of years ago.

I decided to write my story of installing a plastic door. My doors open outward. During installation, there were gaps from below through poor pressure when the doors are closed with a latch. The bend of the box did not fit the bend of the canvas. The installers fixed the canvas with convolutions. When using, 2 problems were discovered that must be taken into account when buying doors. The door frame and threshold are made from an ordinary window profile. Natural and external condensate accumulates on the threshold and does not disappear in any way, rises to a height of 1-2 millimeters. It is not clear where to eliminate this condensate. You can’t go inside, the slope of the profile does not allow you to go outside. At sub-zero temperatures, over time, it freezes up on the rubber. 2nd: moisture from under the upper door seal, external condensate is on the upper slides of the lock. When it freezes cold and it is impossible to open or close. Today I identified these problems to the manufacturer. I make an excellent suggestion to install strips on top of the doors and above the threshold that prevent water from getting into the box. In addition, do not allow drilling for mounting the bottom of the box. Moisture enters the chamber with a profile. Virtually no sealant will hold. Thank you for attention.

How to install a plastic window in wooden house? It would seem that there is nothing complicated in this, because very often we see quite modern standard frames made of metal-plastic in classic wooden houses. However, when installing them, it is necessary to take into account the features of the tree as building material and carry out installation strictly according to special technology.

Installation feature

Unlike brick or concrete, wood shrinks over the lifetime of a building. This process is most active in the first year after the construction of the building, but then it does not stop. Wood tends to swell with excessive moisture and dry out when the temperature rises.

All this cannot but affect the window frames, and the usual installation will lead to the fact that the windows will quickly fail. Then how to install plastic windows in a wooden house so that they last a long time? This will require a special design, which is called casing or pigtail.

Casing is bars that have a special shape. They are mounted around the entire perimeter of the window to minimize the impact of any movement of the tree on the window frame.

This is done as follows:

1. The window opening should initially be 5-7 cm larger than the window frame, you can leave 10 cm on top. This distance is necessary to install the casing so that you do not have to reduce the size of the windows. If you plan to reconstruct an old house, the window openings will have to be expanded.
2. On the sides of the opening, protrusions for gun carriages are cut out - these are the side parts of the casing, which are vertically installed in the opening. The depth of the protrusions is 5 cm.
3. To make a gun carriage, you need to take a beam measuring 10x15 cm, a groove measuring 5x5 cm is cut out along its entire length. The length of the beam should be 5 cm larger than the window frame.
4. The carriage with the help of a groove is installed in the opening, it is desirable to lay the junction with a rolled tow. This will increase the sound insulation of the window and protect against the penetration of cold.
5. The upper and lower parts of the casing are mounted. As a result, a window box will be obtained along the perimeter, which will protect the frame from shrinkage of the tree. Important: a small technological gap should be left between the upper part of the casing and the frame, designed for gradual shrinkage.

It is filled with thin boards, which are wrapped with pallets. Over time, they will have to be knocked out, as the wall will gradually descend.

Window installation technology

When the casing is ready, you can proceed directly to the installation of the metal-plastic frame, and it begins with the installation of the window sill. This is the base that will support the weight of the window structure. How to install a plastic window sill in a wooden house?

To do this, grooves are cut on the sides of the window opening, their depth is up to 8 mm. With the help of thin wooden plates, you need to adjust the height and evenness of the window sill, it is checked with a building level. After that, the plastic window sill is attached to the screws.

They are twisted at a distance of 2 cm from outside, rubber washers must be placed under the hats. This will help prevent cracks in the plastic. When the installation is completed, the window sill attachment points will be invisible from the side, as they will be hidden by the window frame.

How to install a metal-plastic window in a wooden house? Before installation, a handle must be installed on the window frame, while it is not necessary to completely remove the protective film from the frame. It is removed only at the attachment point, after which the handle is installed on the bolts and transported to the closed state.

The installation technology in the future differs little from conventional installation in a city house. It is carried out as follows:

• Windows with double-glazed windows are removed. Mounting an empty frame is much easier, and there is less risk of accidentally damaging the glass.
• The frame is installed in the opening, after which it is drilled through on the sides and in the upper part: the indents from the corners of the sash are 30 cm on each side.
• It is necessary to make sure that the window is located strictly vertically, for this it is checked with a building level. A spacer bar is placed between the window frame and the frame, its thickness is 1 cm. It acts as a stop when fastening the window with self-tapping screws, otherwise the frame will be “led away”, which will cause distortions and defects in work.
• The frame is attached with screws. It is important that they do not screw into the crest of the opening, otherwise the installation of the casing will be completely useless. The frame should be installed in the center of the window opening, do not place it too close to the outer edge.

After that, the sashes are hung, the spacer bars are removed, and the seams are filled with mounting foam that seals the seams. It is imperative to close up the space under the windowsill, sometimes it is closed not with foam, but with silicone sealant.

The last stage of work is the installation of an ebb, designed to divert water from the window frame and wall. It is attached with self-tapping screws.

How to install plastic windows on a wooden house, and can you do it yourself? Installation is recommended to be carried out with your own hands only if you have experience and skill in working with tools. The heat in the house depends on the correct installation of the window, and if you have doubts about your abilities, it is better not to be stingy with the call of specialists.

Installation of doors in a house made of logs or timber

How to install a plastic door in a wooden house? The technology is practically no different, since changes in the structure of the tree will also affect the doorway.

So that the door frame does not suffer from shrinkage or swelling of the wood, a pigtail is made in the same way. Then, according to the same principle, a box is attached to it, on which the door is hung.

For wooden house you can use any doors, but the classic options from the array look especially organic. They will be in harmony with the overall design of the house, in addition, they provide good heat and sound insulation. When installing, it is important to check the verticality of the racks: if the door turns out to be even a little skewed, it will very soon begin to creak.

Proper installation of plastic windows in a wooden house will ensure a tight connection between the wall and the frame. It is important to strictly observe the installation technology and avoid any deviations.

You need to enable JavaScript or update the player!

Entrance doors in a country private house are its business card, they embody the general style and form the facade of the house. From what products you choose, depends, including the safety of the inhabitants of the house. Therefore, the front door to the house must be well chosen and of high quality.

Today we will talk about the features of plastic entrance doors for private houses and not only, you will also see photos of plastic samples and get acquainted with their average price, among other things, you will find out what exactly affects the price of the structure.

Quality criteria for the front door of a private house

A key indicator of the reliability of the front door is its design features and material of manufacture. Regardless of price and material, it should include the following elements:

The box for doors, if they are armored, is made of a thick metal corner or a profile factory pipe. The door frame is made of high quality steel sheet. From inside the door must be equipped with stiffeners, which should be about 5-6 pieces.

As a rule, they are placed vertically, but they can also be combined with horizontally located ribs to enhance the protective properties. Insulation and sound insulation are invested in the voids of the doors, and the doors are additionally equipped with reinforced hinges.

If the door is equipped with both a lever and a cylinder lock, it will be almost impossible to crack it, also you can additionally put special pins for protection from robbers.

Previously, entrance doors for private houses were made only of wood, but now they can be ordered from different materials, including plastic.

Features of plastic entrance doors: photo, description and benefits

The advantages of plastic entrance doors are a wide choice design solutions(samples can be found in the photo on the Internet), affordable price, opportunities additionally equip the product with electronic integrated systems and in many other ways.

In addition, the input plastic structures reliably protect the house from noise, temperature changes and atmospheric phenomena.

In general, the advantages of installing plastic doors as entrance doors are:

• excellent sound-absorbing characteristics. Also, plastic does not let in not only unnecessary sounds, but also dust and cold, in addition, it does not allow heat loss inside the house. If you definitely want to protect yourself from external factors, then it is better to purchase products with double glazing;
• a wide range of design ideas embodied in the creation of structures, as well as a large assortment color schemes. Usually ready plastic products are laminated under a tree and decorate corrugated glass, stained-glass windows, bindings, etc.;
• ease of care for plastic. Naturally, entrance structures are much more affected by street dirt and dust than interior ones. But plastic products absorb this differently than doors made of other materials, and washing off dirt is much easier;
• plastic is resistant to ultraviolet rays, temperature fluctuations, high humidity, shock and other phenomena. Unlike wood or MDF, plastic structures do not deform and retain their characteristics for a long time under the influence of these factors;
• duration of application. Plastic may not need to be repaired or replaced for a very long time, if you follow all the rules for operating the product;
• affordable design price. It does not need expensive equipment, and installation will not cost too much. Qualitative plastic is much cheaper metal and natural wood;
• reliability. After all, the entrance plastic doors are still in production equipped with a durable metal frame and door leaf, which make the structure more resistant to all kinds of mechanical stress. And high-quality locking mechanisms and fittings will help protect the house from unwanted guests.

As for the resistance of plastic to breaking, it is at the level of steel structures. Additional reliability of plastic products is provided by the following:

As already mentioned, plastic exterior doors can be the embodiment of various design solutions, you can choose any color or arrangement of elements you like. And the arched top or curved imposts will give them a special uniqueness.

Options for entrance plastic doors

Where can I put metal-plastic doors with double-glazed windows?

Plastic door structures with double-glazed windows can be used as entrances to the house. In addition, they can be installed in the following places and cases:

What are plastic doors made of?

Plastic structures with double-glazed windows include a frame that is placed in the doorway and has a chamber structure. The entrance door made of metal-plastic can have from 3 to 7 chambers. And in order for the structure to be sufficiently rigid, it is equipped with a steel reinforced amplifier.

The plastic construction necessarily has sashes, which can be as follows:

• swing;
• sliding;
• folding.

Required fittings for a metal-plastic front door:

• pens;
• loops;
• internal binding.

All these parts make it easier to open and close, as well as qualitatively press the canvas to the box. In addition, the door includes slopes made of sandwich panels or plastic.

Features of the design of plastic doors

Plastic door structures are perfectly combined with such walls of the house:

• brick;
• stone;
• concrete;
• wooden, provided that the door plastic imitates wood in its texture.

The canvas can be deaf, or equipped with transparent, frosted, tinted or mirror glass, on which one or another pattern can be additionally applied.

How to adjust the front plastic door with your own hands?

No matter how high the quality of the front door, it can eventually sag under the pressure of its own weight. To prevent this, it should be adjusted from time to time. For this screws required, which are located under the decorative hinge bar. You need to adjust the design using hexagons and a Phillips screwdriver.

The adjustment goes like this:

The average cost of products on the market

The price of plastic doors depends on factors such as:

Naturally, products from foreign eminent manufacturers will have a much higher price than their domestic little-known counterparts.

The most famous domestic manufacturers of plastic doors in the Russian market used in the production of German plastic well-known brands that also deal with plastic windows, among them:

Plastic products from South Korean, Belgian, Turkish and other manufacturers are also used.

The price of a plastic front door depends on the number of sections and the presence of glass inserts. So, a standard design with one section can cost from 20 to 60 thousand rubles. And sliding structures, depending on the number of wings and type, can cost from 40 to 300 thousand rubles.

As you noticed, there are a lot of advantages for plastic door structures, and all this against the backdrop of a very attractive price. Of particular note is the fact that a plastic door, designed and decorated in one way or another, will perfectly match any exterior.