1 storey houses with a veranda. Projects of one-story houses with a terrace

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to start construction.

The main part of the project is the architectural and design sections. If the customer is sure that there are intelligent specialists in engineering networks in the construction team, then the development of this part of the project in a specialized company can be abandoned. But it is necessary to understand that the architect, designer and engineer are working on the project together and such moments as, for example, strobes and openings in the walls for laying pipes and wires are provided for by them in advance.

The engineering part of the project is divided into several parts

  • Water supply and sewerage (VK)
  1. water supply scheme
  2. sewerage scheme
  3. general view of the system.

Before proceeding with the design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply gives complete independence from external conditions. But it must be remembered that you will need your own sources of water, and drilling a well will cost a decent amount.

Connection to a centralized system will require designing in accordance with the specifications of the existing network and obtaining permission for tie-in.

When connecting a sewer to a centralized system, the procedure is the same as when connecting a water supply: making a request to the relevant services, developing a project, obtaining permission to tie into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

  • Heating and ventilation (HV)
  1. heating scheme: calculation of the required power of the equipment, distribution schemes for heating mains, location of pipes and radiators
  2. ventilation scheme: binding to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, the location of stoves and fireplaces
  3. boiler piping (if necessary)
  4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric), or connected to centralized networks.

  • Power supply (ETR)
  1. lighting layout
  2. wiring of power networks
  3. ASU scheme
  4. grounding system
  5. detailed description and characteristics of all elements of the system.

Electrical systems can be divided into mandatory and optional. Mandatory include indoor and outdoor lighting, ventilation, air conditioning and electric heating systems. Additional systems include such systems as "warm floor" or automated control gate.

IMPORTANT

  • Each of the parts of the engineering section of the project should contain a general and technical descriptions, specifications of materials and necessary equipment.
  • Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.
Package "Engineering networks"

Package "Engineering networks"

The project of engineering networks will allow you to competently lay communications and make the house truly comfortable and modern.

  • Price 3 800 rubles.

Departure of the architect

Departure of the architect is carried out for individual settlements, the possibility of obtaining this service in your

Specify the region with the manager.
The initial departure involves: obtaining a technical assignment and collecting information, communications, architectural data of buildings, clarifying the linear and height dimensions of the site, photographic fixation.

Price: 500 rubles per hour*

*the time from the moment of departure from the office to the moment of returning back is taken into account

Departure of the architect

Departure of the architect

Get advice and recommendations from the architect at your site

  • Price: 500 rub. in hour

Package "Foundation adaptation"


When a typical project of a house is being developed, then some average soil parameters are taken as a basis. But, without having the exact data of the geological expertise, it is difficult to take into account all the nuances in the design. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally laid down in the project. And this means that the foundation - the basis of the whole house - will need to be finalized in order to make it strong and reliable.

To completely eliminate all problems when laying the foundation, the specialists of our company have developed a package "Adaptation of the foundation". When implementing a package, not only specifications but also the wishes of the customer.

This package includes:

  • choice of foundation type
  • calculation of technical parameters:

Foundation footing depth
- load bearing capacity
- indicators of soil stress under the base of the foundation
- cross-sectional area of ​​the working reinforcement, etc.

  • detailed drawings of the zero cycle
  • cost sheet for building materials.

Adaptation of the foundation gives a full guarantee of its strength, and hence the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of a finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally laid down in the project. And this will help save materials and financial resources.

Price: from 10,000 rubles. - tape, plate

from 14 000 rub. - pile foundation

from 18 000 rub. - UShP (taking into account the warm floor in the slab)

Package "Foundation adaptation"

Package "Foundation adaptation"

Carefully prepared foundation project - a strong and reliable home

  • Price: from 10,000 rubles.

Package "Lightning protection"


Often, developers do not attach much importance to protecting their own houses from lightning: someone saves, someone thinks, someone hopes for "maybe". But 3-4 years after the construction of the house, many people remember about lightning protection. The roofing felts of a neighbor burned down in a thunderstorm Appliances, roofing felts, statistics caught my eye on how many fires occur per year due to lightning.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. It is worth thinking about this, if only for purely aesthetic reasons - there will be no need to once again hollow out the walls of the house and pull the down conductor along the facade, violating the well-thought-out appearance building.

Home lightning protection is a system of devices located both outside the home and indoors. External lightning protection prevents lightning from entering the house, internal - protects the electrical network from jumps voltage. And special devices protect electrical engineering from sudden changes in the electromagnetic field within the radius of a lightning strike.

The package "Lightning protection" includes

  • plan-scheme of the location of lightning rods that take on direct lightning strikes
  • cross-sectional diagram of a current collector that diverts current from the lightning rod to ground
  • ground loop circuit that distributes lightning energy in the soil, ensuring complete safety
  • averaged resistance calculations
  • detailed list necessary materials
  • recommendations for project implementation.

The package "Lightning protection" from the company Dom4M guarantees you the safety of your home even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: think about safety in advance

  • Price 3 100 rubles.

Making changes to the project

Often, the customer is faced with the question: choose a typical house project and save money, while losing on the originality of future housing, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this implies additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your house looks original.

The following changes can be made to the project of the house:

move wall partitions. But only if they are not carriers. This operation will allow you to change the size and purpose of the rooms.

moving window and door openings will allow you to change the illumination of the rooms and organize convenient access to the rooms you need

changing the type of floors and walls will allow you to fully realize your own ideas about economical and rational housing

change ceiling heights. Although all our houses are designed with optimal height rooms 2.8 m, some customers believe that high ceilings are additional coziness and comfort

conversion of the attic into a living space will give you the opportunity to expand your own living space

it is worth changing the angle of inclination of the roof and canopies, taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or basement

add, remove, change a garage or a terrace, you can, in accordance with your ideas about the functionality of housing

changing the structural composition, building and finishing materials will allow you to economically manage your own financial resources

a mirror image project will allow you to organically fit the house into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the project. If you could not choose a suitable house in the catalogs, then it may be worth ordering an individual project from an architect.

Price: from 2000 rubles.

Making changes to the project

Making changes to the project

A house built according to a standard project may look original

  • Price: from 2,000 rubles.

Warm floor package

The "Warm floor" technology has become an important component in maintaining the optimal temperature regime and organizing a general comfortable environment in the house. Such equipment can effectively complement any heating system. By the way, sometimes "warm floor" can also act as the main way to heat the house. Due to the use of such equipment, the temperature of the floor is 2-3 o higher than the temperature at the level of the head of an adult.

And the whole room is evenly heated at a height of up to 1.5 meters. As they say, keep your head cold and your feet warm.

If your family has a small child, this will be the solution to many issues. Yes, and you comfortable warmth in the cold season will not hurt.

The "Warm floor" package, prepared by our experts, will allow you to appreciate this technology:

  • heat is evenly distributed throughout the room
  • air warms up in minutes
  • elements of the system are hidden and do not spoil the overall appearance of the room
  • well-thought-out control system using a sensor system or a remote control allows you to quickly adjust and effectively maintain the set temperature
  • the durability and reliability of such a heating system is confirmed by operation in various climatic conditions.

The package "Warm floor" involves the development of an individual project:

  • choice of type and design of the system
  • selection of the most economical and reliable circulation pumps
  • calculation of system parameters
  • heat loss calculation
  • the optimal scheme of the heating system indicating the heating circuit and its area, laying step, type and diameters of heating elements.

Price: 140 rubles. / m²

Warm floor package

Warm floor package

Create a comfortable climate in your home

  • Price: 140 rubles. / m²

Package "Geology"


Engineering and geological surveys are carried out in order to determine the features of the land plot selected for development. And the main task of such work is to minimize all possible negative factors that may affect the construction work and operation of the finished house. First of all, these data are necessary for laying the foundation. And, as you know, the reliability of the entire structure directly depends on its strength.

In this case, the following types of work are performed:

  • inspection of the site allotted for construction and adjacent territories
  • soil sampling at the site
  • studies of soil samples to determine the physical and mechanical properties of soils
  • geodetic survey of the site with adjacent territories and preparation of an engineering-geological section.

Engineering-geological surveys are divided into three categories of complexity.

  • The surface of the land plot is horizontal
  • a small number of indicators of soil variability
  • lack of groundwater or the presence of one aquifer
  • absence of geological processes and technogenic factors.
  • Land plot with a noticeable slope
  • a significant number of indicators of soil variability
  • two or more aquifers
  • at the same time, physical and mechanical characteristics do not significantly affect changes in the parameters of the foundation laid down in the project.
  • Variable land relief
  • The site is based on soils of various origins.
  • large heterogeneity of soil variability indicators
  • complex horizons groundwater with alternating water-bearing and water-resistant soils
  • there are geological processes that affect the construction and operation of the building
  • man-made impacts are observed.

It must be understood that geological work is a reasonable expense on which your safety depends. In addition, often, engineering and geological surveys help to reduce the total cost of building a house, when it turns out that it is possible to replace the materials originally included in the project of the house with less expensive ones or reduce their consumption.

Price: from 20,000 rubles.

Package "Geology"

Package "Geology"

If you want to build a solid house in which more than one generation of your family will live, it makes sense to use the Geology package, which will be performed by qualified Dom4m specialists

  • Price: from 20,000 rubles.

Package "Geodesy"


Geodetic work will allow not only to optimally fit the building into the surrounding landscape and infrastructure, but also save time, money and prevent overspending of materials.

Stages of geodetic work

Topographic survey of the site

At this stage, it is important to take into account the heights, slopes, wetlands and vegetation on the land on which the house will be located.

Topographic survey makes it possible to accurately calculate engineering work, such as the movement of soil and the orientation of the building to the cardinal points.

In addition, all information is applied to the topographic plan, which will later be useful for the development of a landscape project, drainage, arrangement of domestic and storm sewers, systems automatic watering, during work on lighting the site, etc.

Land management work

In the process of these works, the boundaries of the future home ownership are determined and a package of land management documents is created. This will allow you to easily issue the right to use the land.

Engineering and geodetic works

In the course of the survey, geodetic and topographic data are being refined. The result of such work is a detailed technical report, which will be compiled by the specialists of our company.

Marking work

The paper project is transferred as accurately as possible to land plot: the axes of structures and utilities are applied, the configuration of the pit and the fence is determined.

Price: from 10,000 rubles.

Package "Geodesy"

Package "Geodesy"

The package "Geodesy" is a set of calculations that will allow you to correctly position the house on the site with reference to the relief. It also takes into account the presence and features of the location of neighboring buildings, engineering and transport communications

  • Price: from 10,000 rubles.

Adaptation of the project to the frame

Many experts point out that recent times frame housing is becoming popular among

domestic developers.

This type low-rise construction has long been widely used in America and Europe. Its essence lies in the fact that on a wooden or metal carcass wood-based panels are attached. Houses built using this technology have two indisputable advantages: the speed of building a house and high energy-saving rates.

Considering that most of our company's projects involve the construction of a house from aerated concrete or ceramic blocks, we decided to expand the "Additions to the project" package and add the "Adaptation of the project to the frame" service.

This will allow not only to implement the project you like, but also to independently choose the optimal construction technology for your site.

Modern frame housing construction provides a large selection of housing construction options - these are the so-called Canadian and Finnish houses, prefabricated, frame-panel, as well as built using SIP panels, etc.

Therefore, before ordering the service "Adaptation of the project to the frame" in our company, you should first decide which technology frame construction You choosed. At the same time, it would be useful to inform our designers about the technology of which manufacturer will be the basis of the project.

Price: negotiable

Adaptation of the project to the frame

Adaptation of the project to the frame

Adapting a project to a framework is not a whim, but a smart choice modern technologies construction

  • Price : negotiable


Finding a decent house project for an earthquake-prone area is a big problem. The difficulty lies in the fact that there are not so many specialized projects. Therefore, choosing a house that matches your ideas about a comfortable and cozy home is quite problematic.

Adaptation of the project of the house for seismic zones

Designing houses in a seismic zone: both safe and comfortable

  • Price: from 20,000 rubles.

Package "Comfortable home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable.

modern man in a modern house. Most of these amenities are laid down at the design stage. But we are ready to expand their list and help clients make their own housing as comfortable as possible.

Package "Comfortable home"

Don't deny yourself comfort. Additional package "Comfortable home" for those who truly appreciate the comfort of home

  • Price: from 16,900 rubles.

Architectural Passport

The architectural passport contains the most general information about the project of a private house. You won't find here detailed descriptions. All more detailed information is given in the architectural and constructive sections of the project. In the passport, only the main dimensions and heights are indicated. It also reflects the technical and economic indicators of the future structure.

Such a document is being prepared in the same architectural company that designed your house. There is no single sample document, so it can be formatted in different ways. Most often, specialists tend to put all the information on a large format sheet.

The purpose of an architectural passport is purely utilitarian, therefore it contains only the information that is necessary to obtain a building permit from the local architectural supervision authorities.

Sections of the Architectural Passport

Sketch part:

  • facade plans
  • floor plans
  • cuts along the axes
  • roofing design.

An explanatory note that gives general information about the house:

Purpose of the object and its characteristics:

  • building function
  • building construction.

Main technical parameters:

  • built-up area, total and living area
  • estimated number of residents
  • capital category and fire protection level.

Price: 3000 rub.

Architectural Passport

Architectural Passport

An architectural passport allows you to obtain a building permit from local architectural supervision authorities

  • Price 3,000 rubles.

Package "Tender offer"


For any developer, the question from a cheerful nursery rhyme "what should we build a house ...?" far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate the costs "by eye". Without complete information, it will not work to calculate everything to the smallest detail and, in the end, it will cost yourself more. And besides, a careful calculation of the cost of materials and work affects not only your finances, but also the timing of building a house.

You can calculate the construction costs with the utmost accuracy using the "Tender offer" service developed by our specialists. Essentially, this is a document that full list all building materials and works, indicating their volumes.

The presence of a tender offer allows:

  • get a real picture of the costs of upcoming construction
  • attract a construction company that is able to offer the most profitable terms performance of work
  • not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
  • competently supervise the actions of contractors at all stages of construction

a tender offer supported by information on the cost of materials and construction work is a serious argument for obtaining bank loans.

Package "Tender offer"

Tender offer:

Request a detailed quote. Build for yourself!

  • Price 10 500 rubles.

Package "Anti-ice"

Snowdrifts and ice in the winter on the roof of your house cause a lot of trouble. You can, of course, climb onto the roof and wave a shovel in the cold for 2-3 hours - that's business. But it has long been invented and widely used efficient systems snowmelt and anti-icing. Their basis is heating cables. The system is organized on the same principle as the "warm floor". Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the peculiarities of the power supply of the house:

for roofs and gutters: snowmelt in gutters, at the edge of the roof in order to prevent the formation of icicles and frost in the pipes

for the entrance group: heating of steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used for heating the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, it is calculated minimum flow electricity and fire safety. When creating the Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overtemperature cut-off device or a differential circuit breaker for automatic shutdown systems when energy losses are detected. If the system is too large, it is divided into smaller sections. This makes it easier to manage her work.

If you want to get the house of your dreams - trust a professional.

The interior design package is offered in two versions - "Sketch" and "Technical"

"Draft" design project (700 rubles / m²), includes:

  • options for planning solutions;
  • furniture arrangement plans (schematically);
  • floor plans indicating the type of flooring;
  • ceiling plan, without indicating dimensions and cuts;
  • plumbing layout plan;
  • sketches of the main premises;
  • style collage

"Technical" design project (1,500 rubles / m²), includes:

  • demolition and wall plans;
  • plan for arranging furniture and equipment;
  • full plan of drywall systems;
  • all electrical circuits;
  • floor plan;
  • all wall sweeps;
  • surrounding natural scenes. Therefore, for customers who value peace of mind and love comfort, we recommend using the " landscape design". Our company Dom4m has prepared two options for this service - a full package and an economy version.

    Full package

    • object placement plan
    • land plot plan with vertical marks, including calculation of the volume of soil masses to be moved
    • plan of roads and footpaths
    • a project with a 3D image of garden buildings and small architectural forms
    • 3D dendrological plan
    • drainage system project
    • design solution site lighting
    • automatic irrigation scheme.

    Each position of the project is supported by detailed calculations, diagrams and specifications.

    Economy version

    • plans and calculations without a vertical layout, without a drainage system scheme, without a lighting scheme;
    • plans for paths and garden buildings without additional technological solutions.

    Price: from 3,000 rubles. per hundred

    Package "Landscape design"

    Package "Landscape design"

    Harmony at the intersection of architecture and nature

    • Price: from 3,000 rubles. per hundred

    Individual design


    If you decide to build a house, then you have your own idea of ​​​​what your dream home should be like. And if none of the standard projects suits you, it makes sense to think about an individual project. In addition, it will take into account all your wishes as much as possible: the level of comfort, family composition, even the view from the window. It is clear that such a project will cost a lot. But you will know for sure that there is no other like it.
    Sometimes, however, you have to resort to individual design forcedly. For example, the developer got a plot of land of a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

    Stages of work on an individual project:

    • development of technical specifications for the design of a house
    • contract for design work
    • preparation of a draft design: linking the building to the terrain, external and interior view, layouts, cuts
    • detailed study of sections of the project.

    In addition, you can also order:

    • projects of additional structures - a garage, a workshop, a bathhouse, etc.
    • visualization of the project in 3D format.

    Ultimately, the customer receives a package of design documentation, consisting of architectural and structural sections.

    The project features:

    • The general plan of the house with its binding to the boundaries of the site.
    • Floor plans, which indicate the thickness of walls, lintels and partitions, the area of ​​\u200b\u200bthe premises, the specification of windows and doorways.
    • Facade plans with indication of finishing materials and color schemes.
    • A typical documentation package assumes the presence of two copies of the house project. The first

      remains with the customer the second copy is handed over to the builders. If necessary, you can reorder the third copy of the project.

      It is not necessary to make such a copy. It may be useful to you only in a few cases. Usually, this is done in order to provide the project to third parties, such as material suppliers.If time is precious, then the presence of an additional project at home will help to significantly speed up the work on adapting the project, and the availability of such copies from several specialists at once will significantly reduce construction time.

      And, besides, having a copy of the project will help, if necessary, to restore lost or damaged documents without unnecessary hassle and time.

      Call! In company Dom4M will treat your problem with maximum attention . Our specialists will issue an additional copy of the project in the shortest possible time.

      Additional copy of the project

      Additional copy of the project

      For the prudent: an additional copy of the project with a seal

      • Price 3,000 rubles.

In the world of modern housing construction, one-story houses with a terrace have long been considered evidence that the owners care about their health and comfort, because without it rest in the summer and early autumn is unthinkable, when a simple wooden structure saves from the sizzling summer heat. A place in the house for the arrangement of a terraced area, its design is chosen for a long time and laid at the stage of designing the box and the foundation of a one-story house.

Rest area design

There are a lot of options and schemes for arranging terraces; in each case, the arrangement of a terraced area included its own advantages and features. As a basis, the scheme of a one-story house with a terrace is most often used. But in any case, there are always a number of mandatory elements in the design of the terrace area:

  • Wooden flooring on a low light foundation;
  • Fencing and stairs;
  • A canopy or awning that covers vacationers from the sun or rain.

Note! The open and closed design of the terrace is distinguished by the presence of side fixed glazing or a blank wall on the north side.

Terraces are not classified by the presence of a canopy or canopy, since in most cases the terraces attached to the house have a removable awning or a folding canopy. Terraced areas built into the box of the house sometimes have a frame or a canopy frame, on which you can quickly and simply deploy a fabric awning. In the evening or when there is a lot of cloudiness, you can refuse to use an awning, turning the site into an open version of the terrace. At the same time, the design does not spoil the beautiful appearance of the building at all.

The basis of the terraced building is a flat platform with a boardwalk, raised above the ground on a light trailed foundation. The building is completed after the settlement of the foundation of the building, but it is considered more convenient when a one-story house with a terrace has a common foundation.


This approach allows you to use truss system houses for arranging a canopy over the terrace, and the walls of the building will protect from slanting rains, midday sun and wind.

How to choose a terrace scheme for a one-story house

Correctly inserting a terraced area into the design of a one-story house is not as easy as it might seem at first glance. You will need to take into account several basic conditions that affect the layout of a one-story house with a terrace:

  1. The orientation of the terrace area relative to the layout of the house. A place to rest does not always successfully coexist with a bedroom or a children's room;
  2. Linking the location of the terrace to the movement of the sun in the sky and, accordingly, the illumination of the site in different time days;
  3. The presence in the immediate vicinity of the site of open water or thickets on the soil. In this case, the rest can be spoiled by insects and birds that hunt them, and a veranda is more suitable.

Advice! You should not place a terrace area closer than 3 meters from the entrance to the basement, bathhouse or garage. Smells and dampness can not only spoil the rest, but also lead to the defeat of wooden poles and floors by pathogenic microorganisms.

For the same reasons, a terrace built on a stationary foundation of a one-story house can last an order of magnitude longer than any attached options.

Proper orientation of the terrace design for a one-story house

The built-in terrace should be located in such a way that it is fully illuminated by the sun's rays until well after noon. Usually, in this case, the facade of a one-story house with a terrace during construction is turned to the west-north-west, as in the photo.


As a rule, this is done for small one-story houses, in which most of the surrounding space is covered with trees. There is enough heat and light for deep warming up of the wooden platform, providing a comfortable rest in the evening.

If you orient the "face" of the terrace to the southeast direction, then the recreation area will heat up to a red-hot state. During the day, you can appear on it only if the site is slightly blown by a draft, and the canopy has a reach over the outer fence of at least one and a half meters, reliably reflects and dissipates most of the solar heat.


In some cases, as in the photo, when designing the location of the terrace, it is necessary to specially build a roof over the site in the form of a separate truss system.

The removal of the terrace from the north side of a one-story building does not make sense at all. First, the northern part of the house box is the coldest and dampest. Moss often grows here, and wood quickly rots. Even if this part of the walls is blown by the breeze and excess moisture is removed, installing a terrace with a canopy will be a mistake due to the large number of insects. Secondly, a canopy over the terrace area will reduce the illumination and turn the wall of the house into a wet pedestal.


Orientation to the east will appeal to lovers of morning tea in the fresh air, when the sun is not yet baking, but there is enough heat for morning relaxation.

The correct layout of the terrace in a one-story house

In addition to the correct orientation to the sun, it is often necessary to look for a way to correctly tie the terrace area to the layout of the premises inside the building. The correct layout of a simple building can significantly complicate or simplify life.

For example, in some cases, when designing a one-story house, a terrace is specially installed from the most illuminated side. AT one-story house, measuring 9x12 m, with three bedrooms, it would be correct to arrange the bedrooms on the west wing, with outside to the bedrooms, provide a covered terrace area with a width of at least 3 m.

The three-bedroom wing is dark during the morning and afternoon, keeping the morning chill indoors. In the evening, the canopy will allow the low sun to partially warm the sleeping rooms and ventilate them well. In winter, the low sun will warm the walls of the room much longer than in the summer.

In addition, the terrace area can be closed decorative panels polycarbonate, climbing plants, fabric curtains and awnings, which increases sound insulation, prevents penetration into the bedrooms. It's one thing when it rains under the window, it's another thing if the rain flows down from the roof three or four meters from the window.

For small and medium-sized one-story buildings, when planning, it is necessary to take into account the convenience of using the terrace. The most common option for using a terraced area is to combine it with the entrance to the house, as in the photo.


It will be very convenient to use the terrace as an outdoor dining area adjacent to the summer kitchen. To do this, you will need to plan the kitchen in close proximity to the terrace area. This option will be very convenient for a house of 6 by 6 m.


Another recommendation of experts is to locate the terrace of a one-story house at the maximum distance from the entrance to the site. Firstly, it allows you to use the premises as a summer residence, dining room, activities, children's games and just outdoor recreation, without attracting the attention of passers-by and onlookers.

Individual preferences

In addition to a rational approach to planning the place and shape of the terrace of a one-story house, there is a subjective approach when the owners build a terrace area, primarily for the most comfortable outdoor recreation. Such cases include options for building a terraced area above a pond, or on the banks of a river, or overlooking a beautiful area. Perhaps there is little rational grain in such a decision, but the terrace should bring positive emotions, and this is also the right decision.


Conclusion

In the construction of terraces, there is a rule - a terrace area will never be too large, so when choosing a place and size, make the dimensions of the flooring and canopy as large as possible. In fact, this room allows you to organically complement the internal layout of a one-story house, and the more free space there is, the more comfortable the rest will be.

According to the ARXY architectural bureau, one-story residential buildings are no less popular today than two- or three-story buildings, as they are suitable for construction on large and small plots of land.

Often people are also interested in projects of one-story houses with a terrace. They allow you to get a presentable building that combines the originality of architecture, convenient location of premises, good functionality.

What are the features of the projects of one-story houses with a terrace?

The presence of a terrace allows you to increase the space needed for relaxation, add originality and comfort to the house. It can be used for various purposes, including as summer kitchen, canteen.

Projects of one-story houses with a terrace from the architectural bureau ARXY include the main points:
construction of the foundation of the terrace;
having large windows.

The general style of the house, its area, the number of rooms and their zoning depend solely on the wishes of the developer and his vision of what the future home should be like. In the process of creation, the features of the project and engineering communications are agreed in advance.

Ideally, it is better not to take as a basis typical, finished projects one-story houses with a terrace, since in any case they will need to be finalized, and these are additional time and money costs. Architects and designers of the ARXY bureau have an individual approach to the creation of each project, which allows us to achieve the most positive result.